I can not update my MacBook

I can not update my MacBook
I tried to update and nothing .. I say you can not be installed on my computer, I do not understand because I have met all requirements
good .. I think:
I have Snow Leopard 10.6.8
Processor: 2.1 GHz Intel Core 2 Duo
Memory: 4 GB 667 MHz DDR2 SDRAM
or will the model of my Mac?
I have a MacBook (13-inch Late 2008)

only the late 2008 13" aluminum MacBook model and later meet the requirements. Yours does not as indicated by the error message you are receiving.

Similar Messages

HT5381 can not update my MacBook Pro from 10.6.6 to 10.6.7 through software update and manual installation

I can not update my mac book pro 2.3 GHz Intel core i5 4GB 1333MHZ DDR3 either through software update or manuall installation
Its build 10J3210
thanks

Hi mate
I know even if i tried through software update it stays on 10.6.6
For 10.6.8 i will hv to get updated to 10.6.7 first
i will be happy enough to get on to 10.6.8 atleast as i will be able to get itunes 11 to get my iphone sync with mac
when tried to install downloaded update i got following messege

I can not update OS X mavericks, my macbook OS X lion 10.7.5

i can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading. i did that againt many time

Are you using the App Store to obtain Mavericks? Is your ISP reliable? Can you visit a friend with reliable Internet with adequate broadband (25mb/sec)?

I can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

i can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

Is your MacBook compatible with Mavericks? Open  > About this Mac > More Info, and you will see the MacBook model you have got. Then, check in this site if it's supported > http://www.apple.com/osx/specs
If your Mac is not compatible, OS X 10.7.5 is the most recent version for your Mac. Also, copy the whole message you see when you open the Mavericks installer

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

Can not update tiger and safari does not start

Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
Crobus

Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe

Can not update Adobe Reader as it did not come from Apple App Store.

Can not update Adobe Reader or Adobe Lightroom 5 as they did not come through Apple App Store. Note says I selected not to accept apps other than from Apple. Just started backing up new Iphone and Ipad to Macbook Pro. Is there a setting some where that would allow updates?

Yes there is a setting for that. Open system preferences go to the security & privacy sections, click the lock icon and type in your password. Then in the "Allow applications downloaded from: area tick Anywhere.

Cannot update my apps in app store because it says " you can not update this software since you dont own a major version of the software"

hello people,
its happening since 3 days that i get a updates for my paid and free apps in app store, for my oiphone 4s, when i try to update the message pops up saying that i " you can not update this software since you dont own a major version of the software"
i have many paid apps and i own each and every one of them all are under my apple id and all purchased directly from apple store.
the same thing is also happening with the updates for my macbook pro.
whats wrong ? app store bug ?
i would appriciate any help.
thanks

I just have 1 apple Id . I don't have multiple accounts on App Store. All the apps were purchased from same apple id.
Thanks for quick reply. My problem still persists.

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

When i want to download the new version of iPhoto, i get this message : You can not update this software since you do not have the main version. What should i do ?

HI,
I got this problem : when i want to download the new version of iPhoto, i get this message : You can not update this software since you do not have the main version. What should i do ?
IPhoto was already on my MacBook Pro when i bought it.
Thank you for your help
Thierry

Welcome to Apple Support Communities
Open App Store > Purchases, and see if iPhoto app is listed. If not, unhide it > http://support.apple.com/kb/HT4928 Apart from that, check that iPhoto is in Applications folder. If not, put it in this folder.
If nothing works, remove iPhoto, open App Store > Purchases, and install iPhoto free of charge

I have updated to IOS 8.2 and now I can not update my apps?

I can not update apps after having downloaded IOS 8.2. Need assistance to fix problem. Only way I have been able to work around is by updating by using itunes and connecting my phone to my MacBook Air.

So when you attempt to update, all you set is a spinning circle? What troubleshooting have you tried? User troubleshooting steps are restart, reset, restore from backup, restore as new. I doubt you will have to go that far. But you can start with the restart, which is just powering the phone off/on. A reset is holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Test after that. Are you able to get into the App Store and search for apps or anything else?

Can not update my ipad 1 - This device is not eligible for the requested build:

I had been trying to update my Ipad from IOS 4.3 to 4.3.3 but I can not update it I keep getting the message
This device is not eligible for the requested build:
I read the trouble shooting page and it I had done all the steps mentioned there but still does not work.
I am using Itunes 10.3.1 on a Macbook
If somebody can help or give some tips will be great

Your error with suggested fixes is discussed in these two links.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Is your iTunes version 10.5?
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
 Cheers, Tom

HT4134 can I update my MacBook Pro which has Safari 5.1.10 to OS X? If I can, how do I do it?

Can I update my MacBook Pro (4yrs old) which has Safari 5.1.10 to OS X? If yes, how do I do it? I need to use iCloud but don't know how to load it. I think it takes OS7 and I guess I still have 5.1.10. All help is appreciated. Thanks

It is not really clear just what you need to do to update:
Go to the apple at the left side of the menu bar, About This Mac and what does it show for the Mac OS X version, under the Apple logo?
Also, what else does it say about the processor and memory?

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

Can not update tab if its not the default sub-tab.

Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!

hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran

I can not update my MacBook

Similar Messages

Maybe you are looking for