I can not upgrade S370 because RAID Firrmware update is necesary, but it is not for my RAID card

Hi guys.
When i trry to upgrade my Ironport S370 Web Security Appliance for AsyncOS 7.7.0 build 761 upgrade, by example, it said me thar Update RAID Firmware is necesary for it, but if i try to update this firmware, the system said me that it is not for my RAID card
What can i do?
This is the cli result for the upgrades:
SFPPRXY1P.intranet.cajastur.es> upgrade
Upgrades available.
1. AsyncOS 7.7.0 build 753 upgrade For Web, 2014-07-07
2. AsyncOS 7.7.0 build 757 upgrade For Web, 2014-07-28
3. AsyncOS 7.7.0 build 761 upgrade For Web, 2014-10-01
4. AsyncOS 8.0.6 build 119 upgrade for Web, 2014-10-27, is a release available for General Deployment
5. Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)
[5]> 5
Performing an upgrade may require a reboot of the system after the upgrade is applied. You may log in again after this is done. Do
you wish to proceed with the upgrade? [Y]> Y
Upgrade not applicable to your RAID card
Upgrade installation finished.
SFPPRXY1P.intranet.cajastur.es> upgrade
Upgrades available.
1. AsyncOS 7.7.0 build 753 upgrade For Web, 2014-07-07
2. AsyncOS 7.7.0 build 757 upgrade For Web, 2014-07-28
3. AsyncOS 7.7.0 build 761 upgrade For Web, 2014-10-01
4. AsyncOS 8.0.6 build 119 upgrade for Web, 2014-10-27, is a release available for General Deployment
5. Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)
[5]> 4
Performing an upgrade may require a reboot of the system after the upgrade is applied. You may log in again after this is done. Do
you wish to proceed with the upgrade? [Y]> Y
Removing stale lock file
Note: A new firmware is required for your RAID controller before you can upgrade to the selected version of AsyncOS. This upgrade must be cancelled. Please first update the firmware by running a new upgrade and selecting 'Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)'.
Please refer to the release notes on http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html for further details on the firmware update.
The system upgrade failed. This could be the result of a network interruption or a more serious error. If this problem persists,
please contact customer support.
SFPPRXY1P.intranet.cajastur.es>
Thanks

Regarding 1st issue: it could be that new firmware is already installed.
Look on page 3 of release notes (http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/RAID_controller_firmware_update/raid_firmware_upgrade_release_notes.pdf)
After you run the firmware upgrade, the firmware upgrade package will display in the list of available upgrades even after a successful installation. The presence of this package does not indicate a failed upgrade.
Step8
To verify that the upgrade has run successfully, you can run the upgrade script again after the machine has rebooted. If the upgrade was successful, the upgrade script will indicate that the appliance does not require upgrading
Regarding your second issue: upgrading software:
- do you have internet connectivity to update servers (maybe check upstream proxy settings..)
- what's your current software version running (did you check upgrade path)? maybe you need first to upgrade to 753 or some other version..
- maybe reboot will solve the problem?

Similar Messages

I can't drag files to my iPhone 5 from iTunes. I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes Match that I know of

I can't drag files from iTunes to my iphone 5, I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes M

Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

I can download apps but I can't upgrade them because of an old apple ID on the iPhone?

I purchased the iPhone second hand. I deleted the old apple ID and set up my own. Downloading apps is ok but I can't upgrade them because it looks for the old apple ID password??

As already provided:
All apps are forever tied to the Apple ID used to obtain them. They cannot be updated using any other ID, nor can they be transferred to another ID.
You'll have to delete these apps & purchase them using your Apple ID. They were illegally left on your phone.

Credit card number change, your company can not charge , so , what can I do ?because I buy one year plan , but the plan stop already ,I can not change the credit card details.So, I need to buy one more year or can continous the paln with changing the cre

credit card number change, your company can not charge , so , what can I do ?because I buy one year plan ,
but the plan stop already ,I can not change the credit card details.
So, I need to buy one more year or can continous the paln with changing the credit number?

Hello pen pang,
if your Photoshop is a part of Creative Cloud you can use "Manage your membership and payments|Creative Cloud" at
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html >>>
Payment & credit card >>> Help changing the credit card on your account >>> from there see what hints are listed.
On the other hand I'm sure that you can use the recommended procedure with a "normal" PS too.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
If you need these explanations in another language, please use "Change" at the end/bottom of the website from above
Good luck!
Hans-Günter

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Did you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM

I am getting this message when trying to burn a cd: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.

Look here:
Burner - device failed to calibrate the laser power level for this media.

Been trying to burn a movie onto DVD and get this "The disc can't be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

Been trying to burn a movie onto DVD and get this "The disc can’t be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

It generally means that the media is faulty or of poor quality. Most of us here use Verbatim, Maxell or Taiyo Yuden media.
OR
Your Superdrive may need a clean.
If you have further questions please state what Mac, with what versions of OS X, iMovie and iDVD you are using.

I can not activate a ITune card. I went to Redeem, introduce the code and doesn´t work. I´m realy desappointed.

I can not activate a ITune card. I went to Redeem, introduce the code and doesn´t work. I´m realy desappointed.

Hey there EGARAY,
It sounds like you cannot redeem your gift code to your iTunes account. The following article may help you get that redeemed, or point you in the right direction if you are unable to:
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021?viewlocale=en_US
Thank you for using Apple Support Communities.
Cheers,
Sterling

I can not upgrade S370 because RAID Firrmware update is necesary, but it is not for my RAID card

Similar Messages

Maybe you are looking for