I can not use two PCI-1407 cards together.W​hy?

When I installed two PCI-1407 cards on the same computer, I can find one card in the M&A Explorer,and that card can work well.But another card is invisible in the M&A Explorer.I can find the card in the source manager of windows 2000.I can't find the reason.Give me a hand,please.

If either of the PCI-1407 cards is rev E or higher, then you need to have NI-IMAQ 2.5.1 or higher installed. You can find the revision by looking at the assembly number on the card, 184895x-01, where x is the revision. Otherwise, I would troubleshoot this like any other NI PCI card. Make sure you have the latest version of the NI-IMAQ driver. Try the cards in multiple slots and in multiple computers if feasible. Does each card work fine when installed by itself? Is there anything unusual about this computer (industrial PC, unusual chipset, etc)? Narrow down the problem to one particular card, slot, or computer. You can also try updatin
g to the latest win2k service pack.
Regards,
Brent R.
Applications Engineer
National Instruments

Similar Messages

  • HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

    I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

    When you enable Internet Sharing in OS X, you are creating a separate sub-net.
    There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
    The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

  • SLI - Can I use two different video card versions for SLI?

    Hello,
    Can I use two different generations of MSI video cards that implement the same GPU for SLI?   
    The two video cards are:
    MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
    MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
    MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
    The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2.  The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on.  I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore.  The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
    By the way, why are there so many versions (updates?) to this card?  Have there been issues related to the card that necessitate a revision?
    Thanks

    Different coolers(HS and fans) and possibly different makers of vRAM.  But, you should be able to run SLI without issues regardless of the versions.

  • No video output option at movie project setting can not use my blackmagic video card

    no video output option at movie project setting can not use my blackmagic video card

    There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
    The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
    As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
    I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

  • Can I use two RS-485 cards over one bus?

    I have two PC's with a PCI-485 card each, controlling several FieldPoint modules. I want to implement some sort of redundancy where the inactive PC takes over the RS-485 if the active server fails.
    When connecting the RS-485 line in parallel, I get an error accessing the FieldPoint devices.
    Is there a known way of havinf two RS-485 controllers in the same line, or do I have to implemement some kind of switching to isolate the two controllers?

    If you are using NI's PCI-485, then you can setup a system like you described by setting both system's RS-485 ports to 2-Wire Auto. In this mode, the port will only drive transmit when it has data to send. Then your inactive PC watches for activity from the active server (either via the RS-485 port or some other mechanism like a network ping), and takes over when the active server goes down.
    By setting the transceivers to Auto mode and making sure the inactive server doesn't transmit unless it knows the active server is dead, you won't double-drive the bus.
    Note that 2-Wire auto turns OFF the receiver when transmitting (for 2-Wire communication). Even though you may be using 4-Wire cabling, this could impact your communication. If this is th
    e case, you could use 2-Wire DTE w/Echo which uses the DTR modem line (you have to assert/deassert this manually) to control TX Enable, but RX Enable is always asserted.

  • IPod touch can not use credit, from gift card

    My daughters iPod touch will not allow me to use the credit to purchase money from a game app. In the past It says insufficient funds, but there is credit to cover it.  I have never had this problem before. Could any of the settings been changed?

    I was typing in the past I have had no problems using the credit to make the purchases through the game.

  • HT1918 I can not use my itune gift card even though there is a balance showing on my computer, it keeps wanting to go to credit card

    I entered in itune gift card and used it once,, it shows a balance on screen, but every time I go to purchase something it just goes to my credit card with no option to use credits. Anyone know what to do?

    Click here and ask the iTunes Store staff for assistance.
    (104332)

  • Can I use the pci-6259 card with SCXI?

    I need to know if the new M style daq cards will still work with the SCXI devices. If so, is there any additional hardware ie. cable adapters that I need?

    Craig,
    M-Series devices should work just fine with SCXI. You will need a new cable, as the connectors on M-Series devices are different from those on E-Series devices. I believe the following cable should work just fine for your application: SHC68-68-EP.
    Dan

  • Can i use an airport extreme card in a powerbook 400MHz ?

    i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
    powerbook G4   Mac OS X (10.3.9)  

    wcslingsby, Welcome to the discussion area!
    No you can not use an AirPort Extreme card with your PowerBook.
    Your PowerBook G4 400 MHz requires the original AirPort card.

  • Can you use an iTunes gift card on two different accounts?

    can you use an iTunes gift card on two different accounts? on two different computers?

    A Gift card will add a specified amount of mony to an iTunes account identified with a specific Apple ID (email address and password combination).
    If that Account is set up on both Devices, then they will share the money balance in that account. And can purchase things in the store with that balance.

  • HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

    Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
    Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
    However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
    <Edited By Host>

    Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

  • HT204411 My boss gave ma a gift card but I can not use it in my country, how can I change country to star using it?

    My boss gave ma a gift card but I can not use it in my country, how can I change country to star using it?

    You cannot change your iTunes country unless you are really moving to another country, nor can you change country association for a gift card.  Give it as a gift to a friend who lives in the country of origin for the card.

  • HT2736 I can't use my Australian iTunes Card on my Australian laptop. I get a message saying "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    I can't use my Australian iTunes Card on my Australian laptop.
    I get a message saying:
    "Your iTunes store (US) does not match  that of your gift certificate (Australian)".

    You can't redeem that certificate in another country's store. You also can't change the iTunes Store country with an unspent balance.
    (72677)

  • I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

    I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

    What does this mean..?
    Gaby0526 wrote:
    ...  without having to block directly with the bank card I'm using.
    Changing Account Information  >  http://support.apple.com/kb/HT1918
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

    mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

    You cannot use a UK carrier sim in Chile unless you are a UK customer and have roaming set up with the UK carrier and the Chinease carriers do not offer unlocking so I doubt the iphone is unlocked

Maybe you are looking for

  • Vendor consigment process combined goods issue to cusotmer

    Hi, All, I have some questions on the consignment process. One Scenario: For the MM consgiment without delivery to customer. I listed some steps with my questions below: 1. Create Consigment info record. Is it necessary? 2. Create consignment purchas

  • Changing to Upper case?

    Is easy way to change the input character from keybord to upper case directly, i mean at the same time when the user press a key, the upper case show up on textField? Or i have to do that manually when cursor/mouse left the textField? Ali null

  • Song wont go to ipod

    I bought a new computer and installed itunes. Now when I add new music to itunes it wont go on my ipod. On the bottom of itunes there is a picture of a lock. Can anyone help me with this?

  • Monitoring Used (%) space for tablespaces

    Hi everyone, I am currently using: Redhat Linux ES 5 2.6.18 and also Oracle 10g Release 2 for Linux x86 R10.2.0.3 While monitoring my Tablespaces using OEM Database Control, I notice that two tablespaces were almost full. [SYSAUX] - Size: 290MB , Use

  • I get an error message -50

    Trying to update to iOS 5 and my pc stops and gives me error iTunes -50 n to continue it'll delete my phone info.