I can not wake up my iMac27 remotely

I can not wake up my iMac remotely using LogMeIn ("Wake for network access" turned on,  "Put the hard disk to sleep when possible" turned off, Computer sleep 12 min, Display sleep 10 min in System Preferences and "Wake On LAN" enabled in LogMeIn client). LogMeIn says: the iMac is not turned on or not connected to the internet.
But the iMac is turned on and it is in sleep mode. At the same time Time Capsule is providing the wireless (iPhone) and wired (MacBook Pro connected with cable) internet connection continuously. I have iMac27 (OSX 10.6.7).
When I wake up the iMac (keyboard or mouse) it takes 3-5 sec to connect to the Internet again ("Wake for network access" turned on in System Preferences!). Also I hear "clicking" sound when something turns on in my IMac. I guess it is the hard drive but I should wake up the machine remotely anyway…
Really no idea what I should do to avoid the sequential "re-installation" from scratch on the iMac27. I just simply want to use LogMeIn to connect to my iMac when I am out of home. It worked some time ago… My MacBookPro with the pretty same OSX and programs works fine and I can always wake up MacBookPro remotely with LogMeIn…
Suggestions? Ideas?
Many Thanks

I am still struggling with the same problem. My MacBook Pro with the same OSX and programs has no problem to wake up remotely (e.g. connecting from iPhone LogMeIn App) using the same Time Capsule (AirPort Extreme Base Station 802.11n). My iMac27 and MacBook Pro connected to TimeCapsule (AirPort Extreme Base Station 802.11n) via ethernet cables. Also I can wake up my MacBook Pro remotely form a PC laptop using LogMeIn via WiFi. No clue why iMac27 can not wake up remotely... I hardly believe this...

Similar Messages

  • Can not wake up normally after sleeping too long

    G5 with 23inch cinema LCD, Geforce 6600LE video card
    if only sleep within 1 hour, it will wake up normally by moving mouse.
    if more than 1 hour, the desktop will show but just last 2 seconds. and the display turns dark for 10 seconds and turns blue for 2 sec. and goes dark and repeat the cycle. finally stays dark.
    checked this board. It seems not a single case. Anybody has any idea about this? thx a lot.

    I have the same bloody problem. It started with my upgrade to Leopard. Short sleep is ok - wakes up alright. Longer sleep - comes up with black screen and roaring fans. Well done, Apple. Now I cannot and will not upgrade my laptop as a laptop that can't wake from sleep is about worthless.
    I have: tried pulling the SystemConfiguration power management file out and restarting - didn't fix it.
    I have also cloned my hard drive, erased and reinstalled Leopard, and restored the files and then installed all updates - and now I am back where I started, with black screens and roaring fans after restart (did the same thing before upon safe restart with shift key down, and also on single-user reboot after I started fsck (the roaring fan part, not the black screen). This counts as a major bug.
    Other discussions suggested a problem with graphics drivers missing in Leopard, or perhaps unchecking the 'sleep disks when possible' option under the energy saver as a temporary workaround.
    My laptop stays at 10.4.10.
    Brian

  • Can you wake up your Mac remotely to control it from iPod using VNC app?

    I have the VNC app that allows you to connect to your Mac or PC and control it from your iPod. Your iPod screen displays a miniature version of you computer and by using a selection of tools you are able to do everything on you Mac remotely. The problem is that when you go away or are away from your computer you don't want to have to leave it running continuously so the preferred option is to let it sleep and wake it up remotely when you need to access it. I tried calling Skype on my Mac from another computer but either just leaves a message or rings but doesn't bring the Mac out of sleep mode. This little VNC app is amazing and very useful only if I can get my Mac to wake up so I can connect to it. If not, great app but useless... at least for me.
    Anyone have any ideas?
    Kev

    How about using SSH to remote secure shell into your Mac? That might wake it up.
    Touchterm is the touch app to use for ssh.
    -fred

  • 4150L - Works on web, but can not connect via VPN or Remote Desktop

    Recently purchased a 4150L and installed the latest firmware.  We have been able to access all public websites without any problems.  But, when we try and access our customers computers via VPN (various types) or Remote Desktop, we can't connect.  We can sign-in to VPN, but when we try and access the computer, it says "can't connect".  Exact same message with Remote Desktop.   We are able to connet when use a Verizon phone as a hotspot and from every other internet service that we have tried (i.e. hotels, starbucks, etc.)   It appears it is an issue with the 4150L.
    Verizon Tech Support has been no help!
    All ideas are appreciated!
    Thanks,
    Skip

    Skip,
    VPN traffic should be allowed through on the MiFi 4510L by default.  I know I do not have any issues with mine on either the Cisco IPSec or Cisco SSL VPN Clients.
    If Verizon DNS is interferring then perhaps you could try to connect to your VPN via a direct IP Address instead of a URL.  Not sure what VPN client you have but there should be a No DNS option to connect if you know the correct IP.  You could also try switching your DNS to one of the free ones such as the one offered by Google or any of the others.
    VPN's carry alot of overhead on existing connections in my experience.  Its not untypical to have a 3G connection cut in half when a VPN is applied.  Try running a speed test to make sure your connection is atleast 1 MB on download before initiating a connection.  If the performance of the MiFi is too poor in that area it may never be stable enough to support a connection.  Feel free to post some Speedtest.net averages so we can see what you are working with.
    Something to note about the MiFi 4510L is that it is on the SIM card network.  That means that NAT is always going to be an issue and block your users from providing a truely public IP Address.  Directly remoting to them through any means will be nearly impossible.

  • JMF : Audio can not be played from the remote machine

    Hi,
    I am developing voice chat application.
    As the moment this writing I can capture from mic and play it from the same machine.
    But when I capture and transmit audio from one machine and try to play from remote machine in LAN it does not work.
    Could anybody tell me please What would be the possible causes for this ? I have given the code below.
    //Transmitter
    package lsf.telphony.test;
    import java.io.IOException;
    import java.util.Vector;
    import javax.media.CannotRealizeException;
    import javax.media.CaptureDeviceInfo;
    import javax.media.CaptureDeviceManager;
    import javax.media.DataSink;
    import javax.media.Format;
    import javax.media.Manager;
    import javax.media.MediaLocator;
    import javax.media.NoDataSinkException;
    import javax.media.NoDataSourceException;
    import javax.media.NoProcessorException;
    import javax.media.NotRealizedError;
    import javax.media.Processor;
    import javax.media.ProcessorModel;
    import javax.media.format.AudioFormat;
    import javax.media.protocol.ContentDescriptor;
    import javax.media.protocol.DataSource;
    public class MediaTransmetter implements Runnable
         private MediaLocator mediaLocator = null;
         private DataSink dataSink = null;
         private Processor mediaProcessor = null;
         public static String errorString;
         private CaptureDeviceInfo captureDeviceInfo = null;
         public MediaTransmetter(String rtpURL)
              DataSource dataSource = null;
              ProcessorModel model = null;
              Format formats[] = null;
              ContentDescriptor contentDescriptor = null;
              try
                   captureDeviceInfo = getCaptureDevice();
                   mediaLocator = captureDeviceInfo.getLocator();
                   dataSource = javax.media.Manager.createDataSource(mediaLocator);
                   contentDescriptor = new ContentDescriptor(ContentDescriptor.RAW_RTP);
                   formats = new Format[] { new AudioFormat (AudioFormat.LINEAR) };
                   model = new ProcessorModel(dataSource, formats, contentDescriptor);
                   mediaProcessor = Manager.createRealizedProcessor(model);               
                   MediaLocator outputLocator = new MediaLocator(rtpURL);
                   dataSink = Manager.createDataSink(mediaProcessor.getDataOutput(), outputLocator);               
              } catch (Exception e)
                   e.printStackTrace();
         @SuppressWarnings("unchecked") //check for this statement
         private CaptureDeviceInfo getCaptureDevice()
              CaptureDeviceInfo captureDeviceInfo;
              Vector<CaptureDeviceInfo> deviceListVector = CaptureDeviceManager.getDeviceList(new AudioFormat(AudioFormat.LINEAR));
              for (int i = 0; i < deviceListVector.size(); i++)
                   captureDeviceInfo = (CaptureDeviceInfo)deviceListVector.elementAt(i);
                   System.out.println("captureDeviceInfo = " + captureDeviceInfo);
                   return captureDeviceInfo; // here the firt element is return. Add to login to get the specific CaptureDeviceInfo object.
              return null;
         @Override
         public void run()
              try
                   dataSink.open();
                   dataSink.start();
              } catch (SecurityException e)
                   e.printStackTrace();
              } catch (IOException e)
                   e.printStackTrace();
              mediaProcessor.start();
              System.out.println("Transmitting started successfully.");
         public static  void main(String[] args) { // Loads pastry settings
              MediaTransmetter mediaTransmetter = new MediaTransmetter("rtp://192.168.2.2/audio");
              Thread mediaTransmetterThread = new Thread(mediaTransmetter);
              mediaTransmetterThread.start();
    }//AudioReceiver
    package lsf.telphony.test;
    import javax.media.*;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    public class MediaReceiver extends JFrame implements Runnable
         private static final long serialVersionUID = 1L;
         private static final String FRAME_TITLE = "Telphony Media Player";
         private static final String CONTROL_PANEL_TITLE = "Control Panel";
         private static final int LOC_X = 100;
         private static final int LOC_Y = 100;
         private static final int HEIGHT = 500;
         private static final int WIDTH = 500;
         private Player player = null;
         private JTabbedPane tabPane = null;
         public MediaReceiver()
              super(FRAME_TITLE);
              setLocation(LOC_X, LOC_Y);
              setSize(WIDTH, HEIGHT);
              tabPane = new JTabbedPane();
              getContentPane().add(tabPane);
              addWindowListener(new WindowAdapter()
                   public void windowClosing(WindowEvent e)
                        closeCurrentPlayer();
                        System.exit(0);
         private JPanel createMainPanel()
              JPanel mainPanel = new JPanel();
              GridBagLayout gbl = new GridBagLayout();
              GridBagConstraints gbc = new GridBagConstraints();
              mainPanel.setLayout(gbl);
              boolean visualComponentExists = false;
              if (player.getVisualComponent() != null)
                   visualComponentExists = true;
                   gbc.gridx = 0;
                   gbc.gridy = 0;
                   gbc.weightx = 1;
                   gbc.weighty = 1;
                   gbc.fill = GridBagConstraints.BOTH;
                   mainPanel.add(player.getVisualComponent(), gbc);
              if ((player.getGainControl() != null) && (player.getGainControl().getControlComponent() != null))
                   gbc.gridx = 1;
                   gbc.gridy = 0;
                   gbc.weightx = 0;
                   gbc.weighty = 1;
                   gbc.gridheight = 2;
                   gbc.fill = GridBagConstraints.VERTICAL;
                   mainPanel.add(player.getGainControl().getControlComponent(), gbc);
              if (player.getControlPanelComponent() != null)
                   gbc.gridx = 0;
                   gbc.gridy = 1;
                   gbc.weightx = 1;
                   gbc.gridheight = 1;
                   if (visualComponentExists)
                        gbc.fill = GridBagConstraints.HORIZONTAL;
                        gbc.weighty = 0;
                   } else
                        gbc.fill = GridBagConstraints.BOTH;
                        gbc.weighty = 1;
                   mainPanel.add(player.getControlPanelComponent(), gbc);
              return mainPanel;
         public void setMediaLocator(MediaLocator locator) throws Exception, IOException, NoPlayerException,
                   CannotRealizeException
              setPlayer(Manager.createRealizedPlayer(locator));
         public void setPlayer(Player newPlayer)
              closeCurrentPlayer();
              player = newPlayer;
              tabPane.removeAll();
              if (player == null)
                   return;
              tabPane.add(CONTROL_PANEL_TITLE, createMainPanel());
              Control[] controls = player.getControls();
              for (int i = 0; i < controls.length; i++)
                   if (controls.getControlComponent() != null)
                        tabPane.add(controls[i].getControlComponent());
         private void closeCurrentPlayer()
              if (player != null)
                   player.stop();
                   player.close();
         public static void printUsage()
              System.out.println("Usage: java MediaPlayerFrame mediaLocator");
         public void run()
              try
                   MediaReceiver mpf = new MediaReceiver();
                   mpf.setMediaLocator(new MediaLocator("rtp://192.168.2.2:10000/audio"));
                   mpf.show();
              } catch (Exception t)
                   t.printStackTrace();
         public static void main(String[] args) { // Loads pastry settings
              MediaReceiver mediaReceiver = new MediaReceiver();
              Thread mediaReceiverThread = new Thread(mediaReceiver);
              mediaReceiverThread.start();

    By the way the program does not terminate immediately after starting it. According to your advice I tried removing running it inside in a thread and making it sleep at several points appropriate. No luck.
    I wonder why packets are not sending even the program is running until the end of the line with no exception.
    Have you tried to capture RTP packet traffic with Wireshark or similar kind of network analyzing software with this kind of program?
    I am doubt whether my program is actually transmitting packets but unable to capture those due to the error with transmitter.
    Even with the Wireshark It does not capture outgoing packets.
    And another thing I noticed with netstat is it shows two pots get opened when running the application but those ports are not the one I note in the program.
    For example I run the program with port number as 10000 (sink: setOutputLocator rtp://192.168.2.104:10000/audio). But when I check it with netstat some other ports are open.
    i.e
    nuwan@nuwan-laptop:~/eclipse$ netstat -anup
    (Not all processes could be identified, non-owned process info
    will not be shown, you would have to be root to see it all.)
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    udp 0 0 0.0.0.0:68 0.0.0.0:* -
    udp 0 0 0.0.0.0:40526 0.0.0.0:* -
    udp 0 0 0.0.0.0:5353 0.0.0.0:* -
    udp6       0      0 127.0.1.1:28864         ::: 10772/java*
    udp6       0      0 127.0.1.1:28865         ::: 10772/java*
    nuwan@nuwan-laptop:~/eclipse$
    And each time when I start the program these two ports are changed also.
    And foreign address is not shown ? Any comment for that??
    Is there anything that can be drawn from above information which caused for not working my program.
    This is killing me. And also making me sharper. And I cant leave this behind also. So highly appreciate you time and help.
    Thanks.

  • Can not build TNS connection from remote station but local do

    i install a new instance, everything work well in local machine,
    invole local service name, however, once i do the same work to
    build a new TNS service name by net assist at another (remote)
    machine, it always prompt on: " target object is not availabe"
    or something like this;
    i wonder why the local TNS service connection can work(it seems
    proved everything well), but remote can't, what is the problem?
    thank in advance

    I entered the following message on Sep. 29th and have not yet received a reply so I'm repeating it here:
    I could not get IIOP to work either remotely or locally on my server. My environment runs Oracle 8.1.6 under Windows 2000 Server.
    Per Oracle documentation, I added:
    DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SERVERNAME)(PORT = 2481))
    (PROTOCOL_STACK =
    (PRESENTATION = GIOP)
    (SESSION = RAW)
    to my listener.ora file and:
    mts_dispatchers="(protocol=tcp)(presentation=oracle.aurora.server.SGiopServer)"
    to my init.ora file. When I used the sses_sh command I got the following first few lines:
    "Exception in thread "main" org.omg.CORBA.COM_FAILURE[completed=MAYBE, reason = java.net.SocketException: Socket failed]..."
    Looking at the log I got the following error:
    "TNS-12516 TNS:listener could not find available handler with matching protocol stack".
    I didn't see anything interesting in the trace file.
    Is there something else I need to do to get the listener to find the proper protocol stack? Has anyone encountered and found the solution to this problem?
    null

  • I can not wake the Lion and can not see the Snow Leopard

    Hello,
    I have a (White) 2007 MacBook, with a new 640 GB HD.
    It has 2 partitions: a 40 GB running Snow Leopard ( I am a teacher and have no time - and desire - to substitute my AppleWorks DBs  until this year ends) and a 600 GB running Lion.
    I have an AIM mail account but I can´t use Mail, because I never know if the message was sended or not; AOL said that my configurations are right and that the problem is with their servers, but they not returned the solution.
    So, yesterday I was answering an e-mail message in my journaling application, using Journler 2.6 for Lion. I copied an word from the message I got and pasted in my reply. I highlighted the word to change the font to Georgia.
    Then, something strange happened: the word Georgia became attached to that arrow that I use to click to activate anything. Nothing was responding. I had to Force Quit the Journler.app and all the other apps that were in the background.  Even the OS.
    1) When I started the MacBook again, obviously came the last partition used: Lion. It showed the 2 accounts for that partition, i.e. the Administrator account and mine. I clicked on mine and nothing happened, I tried the Administrator account and nothing happened.
    2) I inserted the disc I burned with the Lion OS, holding the C key: the MacBook rejected; I inserted the disc of Snow Leopard that I bought from Apple: it was rejected either.
    3) I tried to access the MacBook through a Cube running Tiger. I saw both partitions but I could not do what I intended to, that is, change the startup disk to Snow Leopard.
    4) I returned to the MacBook and I got a surprise: I could log in my account. But I only could see the apps in the dock, I was unable to open any of them.
    5) I tried several other times yesterday and today with no success.
    Of course that I want my Lion back; but now the more important to me is to get my MacBook running  my  Snow Leopard account. I register all the data of my students - presences, absences and grades - directly on an AppleWorks DB file.
    So, the big question is: how do I change the startup disk to Snow Leopard?.
    My resources are: 1 iMac 800 MHz running Tiger; 1 Cube 450 MHz running Tiger; 1 FireWire cable (to access the MacBook in the Target Mode, which I will try next); 1 iPhone 3G and a never used 8 GB pen drive. There is a MacBook Pro running Snow Leopard, that is not at home now but eventually could come today, I am not counting on this. It was bought in september of 2009 and I am not sure if it has a FireWire port.
    I thank you for any help.
    Best regards,
    Jorge Lucas ( the guy from Rio Grande do Sul)

    I am using mobilme now, it's working good.
    No doubt Icloud is better and a mindless method.
    My only problem is that I won't be able to use Icloud with mine 2 computers.
    1 is update with Lion, the onther one is with SL,  cause it's a CORE DUAL (no update possible!).
    So that's my problem, buying a new one or never be able to synchronize after june 2012.....

  • How can you turn your iDevice on remotely because it is offline and i cant track it through find my iphone app

    how can you turn your iDevice on remotely because it is offline and i cant track it please help

    You can not turn on an iDevice remotely.

  • Mouse will wake not wake up mac mini

    Just purchased and hooked up a Gyration cordless optical air mouse and keyboard to my mac mini. The mini is connected to my television. When I put the mini to sleep I can not wake it back up with these devices. The light on the RF receiver hooked in t he usb port continues to blink rapidly when the mac mini is in sleep mode.
    Help!!!

    The problem is that some external devices simply don't integrate into MacOS sufficiently that they allow this sort of thing. For example, when sleeping, the mini may not know the USB dongle and thus keyboard/mouse are present, so not detect their presence and the mouse/key wakeup signal.
    If there are drivers that came with (or are available for) this device and are suited to the version of MacOS, install them and see if that helps. If there are not, it's possible that an SMC reset might help since that's the device which controls system devices, but I wouldn't hold out much hope.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.

  • Can I wake my Macbook Pro from Sleep with the Remote app on the iPhone?

    I can't access my Macbook Pro remotely, specially after several hours of inactivity,, whenever I try to access content of my library through the remote app or the Apple TV I'm unable to wake my Macbook Pro up.
    My Macbook Pro is 2012 model (the last with de CD Drive) and it's running the Maverick OS, my questions are:
    * I'm unable to find the "Unable Power Nap while plugged" option on the energy saver tab... is that because the model of my laptop doesn't support that?
    * In order to access content from my library remotely, should the "Computer Sleep" option on the energy saver be on "Never" instead of the "1 hour" that I'm currently using... or is there a way to still be able to wake up the laptop with those settings

    Do you have a Bonjour Sleep Proxy server on your network?
    <About Wake on Demand and Bonjour Sleep Proxy>
    If you do not have a Bonjour Sleep Proxy server on your local network, then you cannot allow your Mac to go to sleep at all.  System Preferences -> Energy Saver -> Computer Sleep -> Never (slide all the way to the right).

  • Can not find the the RBS tables after installing the Remote Blog Storage

    Hi,
    I am trying to configure the Remote Blob storage on my Sharepoint Server 2013. I am using the SQL Server Express 10.50.6000.
    Everything is going fine, but I can not find the tables in the Database.
    I am not sure where I did the wrong thing.
    machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    but the installation is looking for some other.
    Thanks in advance.
    === Verbose logging started: 3/23/2015 13:55:09 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
    MSI (c) (44:F8) [13:55:09:000]: Resetting cached policy values
    MSI (c) (44:F8) [13:55:09:000]: Machine policy value 'Debug' is 0
    MSI (c) (44:F8) [13:55:09:000]: ******* RunEngine:
    ******* Product: RBS.msi
    ******* Action:
    ******* CommandLine: **********
    MSI (c) (44:F8) [13:55:09:000]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (44:F8) [13:55:09:000]: Grabbed execution mutex.
    MSI (c) (44:F8) [13:55:09:016]: Cloaking enabled.
    MSI (c) (44:F8) [13:55:09:016]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (44:F8) [13:55:09:016]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (90:A4) [13:55:09:016]: Running installation inside multi-package transaction D:\RBS.msi
    MSI (s) (90:A4) [13:55:09:016]: Grabbed execution mutex.
    MSI (s) (90:34) [13:55:09:016]: Resetting cached policy values
    MSI (s) (90:34) [13:55:09:016]: Machine policy value 'Debug' is 0
    MSI (s) (90:34) [13:55:09:016]: ******* RunEngine:
    ******* Product: D:\RBS.msi
    ******* Action:
    ******* CommandLine: **********
    MSI (s) (90:34) [13:55:09:031]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (90:34) [13:55:09:031]: Setting cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
    MSI (s) (90:34) [13:55:09:031]: Using cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
    MSI (s) (90:34) [13:55:09:031]: Setting cached product context: machine assigned for product: 000021599B0090400100000000F01FEC
    115C834F46A5E33479CEE53534AD76A0
    :34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:265]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (90:34) [13:55:09:265]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
    MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: looking for appcompat database entry with ProductCode '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
    MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (90:34) [13:55:09:265]: Transforms are not secure.
    MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\rbs_install_log.txt'.
    MSI (s) (90:34) [13:55:09:265]: Command Line: TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=WSS_Content DBINSTANCE=jpntkyint01\sharepoint FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1 CURRENTDIRECTORY=D:\ CLIENTUILEVEL=3 CLIENTPROCESSID=14660
    MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{1AC68E73-94F1-4A01-B229-82B2F73C3326}'.
    MSI (s) (90:34) [13:55:09:265]: Product Code passed to Engine.Initialize: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
    MSI (s) (90:34) [13:55:09:265]: Product Code from property table before transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
    MSI (s) (90:34) [13:55:09:265]: Product Code from property table after transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
    MSI (s) (90:34) [13:55:09:265]: Product registered: entering maintenance mode
    MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:265]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
    MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
    MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (90:34) [13:55:09:281]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Specifed source is already in a list.
    MSI (s) (90:34) [13:55:09:281]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableBrowse' is 0
    MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AllowLockdownBrowse' is 0
    MSI (s) (90:34) [13:55:09:281]: Adding new sources is allowed.
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Package name retrieved from configuration data: 'RBS.msi'
    MSI (s) (90:34) [13:55:09:281]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableMsi' is 1
    MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (90:34) [13:55:09:281]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
    MSI (s) (90:34) [13:55:09:281]: Running product '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}' with elevated privileges: Product is assigned.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding TRUSTSERVERCERTIFICATE property. Its value is 'true'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILEGROUP property. Its current value is 'default'. Its new value: 'PRIMARY'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBNAME property. Its value is 'WSS_Content'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBINSTANCE property. Its value is 'jpntkyint01\sharepoint'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILESTREAMFILEGROUP property. Its current value is 'default'. Its new value: 'RBSFilestreamProvider'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding FILESTREAMSTORENAME property. Its value is 'FilestreamProvider_1'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '14660'.
    MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '489ffd242e95054781e9ce4b8d0b8aa5'.
    MSI (s) (90:34) [13:55:09:328]: RESTART MANAGER: Session opened.
    MSI (s) (90:34) [13:55:09:328]: TRANSFORMS property is now:
    MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
    MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
    MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\AppData\Roaming
    MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\Favorites
    Action ended 13:55:09: AppSearch. Return value 1.
    Action start 13:55:09: ValidateProductID.
    MSI (s) (90:34) [13:55:09:390]: Skipping action: Sqlmsirc_CheckLanguage_64 (condition is false)
    MSI (s) (90:34) [13:55:09:390]: Doing action: CostInitialize
    Action ended 13:55:09: ValidateProductID. Return value 1.
    MSI (s) (90:34) [13:55:09:406]: Machine policy value 'MaxPatchCacheSize' is 10
    MSI (s) (90:34) [13:55:09:406]: Baseline: Sorting baselines for {56D21E05-679B-40F2-94C1-DB0D7EB2E461}.
    MSI (s) (90:34) [13:55:09:406]: Baseline: New baseline 10.50.1600 from transaction.
    MSI (s) (90:34) [13:55:09:437]: Baseline: Sorted order Native: Order 0.
    MSI (s) (90:34) [13:55:09:437]: Baseline Data Table:
    MSI (s) (90:34) [13:55:09:437]: ProductCode: {56D21E05-679B-40F2-94C1-DB0D7EB2E461} Version: 10.50.1600 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
    MSI (s) (90:34) [13:55:09:437]: Baseline File Table:
    MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:\'.
    MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
    MSI (s) (90:34) [13:55:09:453]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: MsiPatchHeaders
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: __MsiPatchFileList
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
    MSI (s) (90:34) [13:55:09:453]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
    MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
    Action start 13:55:09: CostInitialize.
    MSI (s) (90:34) [13:55:09:453]: Doing action: FileCost
    Action ended 13:55:09: CostInitialize. Return value 1.
    MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Class
    MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Extension
    MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: TypeLib
    Action start 13:55:09: FileCost.
    MSI (s) (90:34) [13:55:09:468]: Doing action: IsolateComponents
    Action ended 13:55:09: FileCost. Return value 1.
    Action start 13:55:09: IsolateComponents.
    MSI (s) (90:34) [13:55:09:468]: Doing action: CostFinalize
    GE: Adding ClientDir1025 property. Its value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\'.
    MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying ServerDir property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\'.
    MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying Eula1033 property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\'.
    MSI (s) (90:34) [13:55:09:593]: Target path resolution complete. Dumping Directory table...
    MSI (s) (90:34) [13:55:09:593]: Note: target paths subject to change (via custom actions or browsing)
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: TARGETDIR , Object: D:\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: WindowsFolder , Object: C:\Windows\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ProgramFiles64Folder , Object: C:\Program Files\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: INSTALLDIR , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: GAC , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir3082 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir1025 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ServerDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\
    MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: Eula1033 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\
    MSI (s) (90:34) [13:55:09:593]: Doing action: IsDotNet20Or40Installed
    Action ended 13:55:09: CostFinalize. Return value 1.
    MSI (s) (90:34) [13:55:09:593]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'IsDotNet20Or40Installed'
    MSI (s) (90:34) [13:55:09:609]: Creating MSIHANDLE (1) of type 790542 for thread 9268
    MSI (s) (90:6C) [13:55:09:609]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB261.tmp, Entrypoint: IsDotNetFramework20Or40Installed
    MSI (s) (90:FC) [13:55:09:609]: Generating random cookie.
    MSI (s) (90:FC) [13:55:09:609]: Created Custom Action Server with PID 14944 (0x3A60).
    MSI (s) (90:D0) [13:55:09:640]: Running as a service.
    MSI (s) (90:D0) [13:55:09:640]: Hello, I'm your 64bit Impersonated custom action server.
    MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding DOTNETCOREPATH property. Its value is '1'.
    MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding IsDotNet20Or40Installed property. Its value is '1'.
    MSI (s) (90:6C) [13:55:09:640]: Closing MSIHANDLE (1) of type 790542 for thread 9268
    One or more .NET Framework assemblies found in MsiAssembly table require the GAC, need to check for the .NET Framework
    MSI (s) (90:34) [13:55:09:640]: Skipping action: CA_ErrorPrereqDotNet20Or40 (condition is false)
    MSI (s) (90:34) [13:55:09:640]: Doing action: SqlFollowComponentsValidate_Redist_64
    Action ended 13:55:09: IsDotNet20Or40Installed. Return value 1.
    MSI (s) (90:34) [13:55:09:640]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SqlFollowComponentsValidate_Redist_64'
    MSI (s) (90:34) [13:55:09:687]: Creating MSIHANDLE (11) of type 790542 for thread 9268
    MSI (s) (90:04) [13:55:09:687]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB281.tmp, Entrypoint: SqlFollowComponentsValidate
    Action start 13:55:10: InstallServices.
    MSI (s) (90:34) [13:55:10:498]: Doing action: StartServices
    Action ended 13:55:10: InstallServices. Return value 1.
    MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: ServiceControl
    MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: ServiceControl 4: SELECT `Name`,`Wait`,`Arguments`,`Event`, `Action` FROM `ServiceControl`, `Component` WHERE `Component_` = `Component` AND (`Action` = 0 OR `Action` = 1 OR `Action` = 2)
    Action start 13:55:10: StartServices.
    MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterUser
    Action ended 13:55:10: StartServices. Return value 1.
    Action start 13:55:10: RegisterUser.
    MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterProduct
    Action ended 13:55:10: RegisterUser. Return value 0.
    MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    Action start 13:55:10: RegisterProduct.
    MSI (s) (90:34) [13:55:10:498]: Doing action: PublishComponents
    Action ended 13:55:10: RegisterProduct. Return value 1.
    MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: PublishComponent
    MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`, `Component`, `Feature` WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
    Action start 13:55:10: PublishComponents.
    MSI (s) (90:34) [13:55:10:498]: Doing action: MsiPublishAssemblies
    Action ended 13:55:10: PublishComponents. Return value 0.
    Action start 13:55:10: MsiPublishAssemblies.
    MSI (s) (90:34) [13:55:10:498]: Doing action: PublishFeatures
    Action ended 13:55:10: MsiPublishAssemblies. Return value 1.
    MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    Action start 13:55:10: PublishFeatures.
    MSI (s) (90:34) [13:55:10:498]: Doing action: PublishProduct
    Action ended 13:55:10: PublishFeatures. Return value 1.
    MSI (s) (90:34) [13:55:10:513]: Resolving source to launched-from source.
    MSI (s) (90:34) [13:55:10:513]: Setting launched-from source as last-used.
    MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'D:\'.
    MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'D:\'.
    MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
    MSI (s) (90:34) [13:55:10:513]: SOURCEDIR ==> D:\
    MSI (s) (90:34) [13:55:10:513]: SOURCEDIR product ==> {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
    MSI (s) (90:34) [13:55:10:529]: SECREPAIR: CryptAcquireContext succeeded
    MSI (s) (90:34) [13:55:10:529]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:10:529]: Determining source type
    MSI (s) (90:34) [13:55:10:529]: Source type from package 'RBS.msi': 2
    MSI (s) (90:34) [13:55:10:529]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{56D21E05-679B-40F2-94C1-DB0D7EB2E461}
    MSI (s) (90:34) [13:55:10:623]: SECREPAIR: Hash Value for the file:RBS.msi matched
    MSI (s) (90:34) [13:55:10:623]: Source path resolution complete. Dumping Directory table...
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: TARGETDIR , Object: D:\ , LongSubPath: , ShortSubPath:
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: WindowsFolder , Object: D:\ , LongSubPath: , ShortSubPath:
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ProgramFiles64Folder , Object: D:\ , LongSubPath: Program Files\ , ShortSubPath: PFiles\
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: INSTALLDIR , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\ , ShortSubPath: PFiles\jfw2d1_t\
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: Eula3082 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: DocsDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Documentation\ , ShortSubPath: PFiles\jfw2d1_t\gsutoqfr\
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: MaintainerDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ , ShortSubPath: PFiles\jfw2d1_t\jygjogya\
    Files\jfw2d1_t\g-pfawke\pt-PT\
    MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ClientDir2052 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\zh-CHS\ , ShortSubPath: PFiles\jfw2d1_t\g-pfawke\zh-CHS\
    Action ended 13:55:10: PublishProduct. Return value 1.
    MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
    MSI (s) (90:34) [13:55:10:638]: Note: 1: 2205 2: 3: Shortcut
    MSI (s) (90:34) [13:55:10:638]: Note: 1: 2228 2: 3: Shortcut 4: SELECT `Shortcut`,`Name`, `FileName`, `Component`.`Directory_`, `Arguments`, `WkDir`, `Icon_`, `IconIndex`, `Hotkey`, `ShowCmd`, `Shortcut`.`Description`, `Shortcut`.`Directory_`, `Component`.`RuntimeFlags`, `Component`.`Action`, `Target`, `ComponentId`, `Feature`.`Action`, `Component`.`Installed`, `DisplayResourceDLL`, `DisplayResourceId`, `DescriptionResourceDLL`, `DescriptionResourceId` From `Shortcut`, `Feature`, `Component`, `File` WHERE `Target` = `Feature` AND `Shortcut`.`Component_` = `Component` AND `Component`.`KeyPath` = `File`.`File` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)) OR (`Feature`.`Action` = NULL AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2) AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
    Action start 13:55:10: CreateShortcuts.
    MSI (s) (90:34) [13:55:10:638]: Doing action: FixCounters
    Action ended 13:55:10: CreateShortcuts. Return value 0.
    MSI (s) (90:34) [13:55:10:638]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FixCounters'
    Return value 0.
    Action ended 13:55:20: INSTALL. Return value 1.
    Property(S): DiskPrompt = [1]
    Property(S): InstallMode = Typical
    Property(S): DOTNET20SP = #2
    Property(S): DOTNET35SP = #1
    Property(S): DBINSTANCEREGISTRY = SHAREPOINT
    Property(S): DBNAMEREGISTRY = WSS_Content
    Property(S): FILESTREAMSTORENAMEREGISTRY = FilestreamProvider_1
    Property(S): SCHEMASUFFIXREGISTRY = <suffix>
    Property(S): WelcomeBmp = WelcomeBmp
    Property(S): TRUSTSERVERCERTIFICATE = true
    Property(S): SCHEDULEMAINTAINERTASK = 1
    Property(S): MAINTAINERGC = GarbageCollection
    Property(S): MAINTAINERREFSCAN = r
    Property(S): MAINTAINERDELETE = d
    Property(S): MAINTAINERORPHAN = o
    Property(S): MAINTAINERCONSISTENCY = ConsistencyCheck
    Property(S): MAINTAINERCONSISTENCYREPAIR = true
    Property(S): OPENREADME = 1
    Property(S): FilestreamPoolTranLifetimeUnit = time
    Property(S): TEXTFILEVALUE = 0
    Property(S): CONSOLEVALUE = 0
    Property(S): DBTABLEVALUE = 0
    Property(S): EVENTLOGVALUE = 4
    Property(S): DBINSTANCE = jpntkyint01\sharepoint
    Property(S): DBNAME = WSS_Content
    Property(S): FILEGROUP = PRIMARY
    Property(S): INTEGRATEDSECURITY = 1
    Property(S): DBUSERNAME = username
    Property(S): DBPASSWORD = **********
    Property(S): FSDBINSTANCE = jpntkyint01\sharepoint
    Property(S): FSDBNAME = WSS_Content
    Property(S): FILESTREAMMETADATAFILEGROUP = PRIMARY
    Property(S): FILESTREAMFILEGROUP = RBSFilestreamProvider
    Property(S): FILESTREAMSTORENAME = FilestreamProvider_1
    Property(S): SCHEMASUFFIX = <suffix>
    Property(S): FILESTREAMTRANPOOLSIZE = 5
    Property(S): FilestreamPoolTranLifetimeTime = 00:01:00
    Property(S): FilestreamPoolTranLifetimeDays = 01
    Property(S): FILESTREAMMAXPOOLSIZE = 200000
    Property(S): FILESTREAMMAXSIZEINBANDWRITE = 1258290
    Property(S): FILESTREAMMAXSIZEINBANDREAD = 1258290
    Property(S): FILESTREAMMAXSIZEINLINEBLOB = 61140
    Property(S): FILESTREAMWRITEALLOCATIONSIZE = 0
    Property(S): MAINTAINERDURATION = 120
    Property(S): SQLServerText1 = 0
    Property(S): SQLServerVersionText3 = 0
    Property(S): _IsMaintenance2 = Modify
    Property(S): ModifyIcon = ModifyIco
    Property(S): RepairIcon = RepairIco
    Property(S): RemoveIcon = RemoveIco
    Property(S): ErrorIcon = ErrorIco
    Property(S): TARGETDIR = D:\
    Property(S): USERNAME = Windows User
    Property(S): _IsMaintenance = Reinstall
    Property(S): AgreeToLicense = No
    Property(S): Interrupted = 0
    Property(S): SetupIcon = SetupIco
    Property(S): Installed = 00:00:00
    Property(S): CreateFilesNoUI = C:\Windows\system32\;D:\RBS.msi
    Property(S): FixLogConfig = 4;0;0;0;0
    Property(S): FixRemoteFilestreamStoreConfig = remotefilestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\RemoteFilestreamProviderConfiguration.xml
    Property(S): FixFilestreamStoreConfig = filestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\FilestreamProviderConfiguration.xml
    Property(S): RegisterProviderFile = RegisterFilestreamProvider.sql
    Property(S): FILESTREAMTRANPOOLTRANLIFETIME = time 00:01:00
    Property(S): IsDotNet20Or40Installed = 1
    Property(S): ProgramMenuFolder.Sql = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): SAPBINOTEPAD = Notepad.exe
    Property(S): MaintainerDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ar\
    Property(S): ClientDir3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
    Property(S): FilestreamDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\ar\
    Property(S): ProviderDir = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\
    Property(S): Eula3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\3082\
    Property(S): ProgramFiles64Folder = C:\Program Files\
    Property(S): SourceDir = D:\
    Property(S): VersionNT = 601
    Property(S): Privileged = 1
    Property(S): Manufacturer = Microsoft Corporation
    Property(S): ProductCode = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
    Property(S): ProductLanguage = 1033
    Property(S): ProductName = SQL Server 2008 R2 Remote Blob Store
    Property(S): ProductVersion = 10.50.1600.1
    Property(S): UpgradeCode = {BA2FF55A-725F-40E5-956E-D08AD0B8175B}
    Property(S): ProductShortName = Remote Blob Store
    Property(S): PlatformExtension = _64
    Property(S): PlatformId = x64
    Property(S): AppGuidRegKey = Redist_Uninstall_RegKey
    Property(S): ARPPRODUCTICON = ARPIco
    Property(S): ARPHELPLINK = http://www.microsoft.com/sqlserver
    Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
    Property(S): PROMPTROLLBACKCOST = P
    Property(S): INSTALLLEVEL = 100
    Property(S): ALLUSERS = 1
    Property(S): SuccessIcon = SuccessIco
    Property(S): WarningIcon = WarningIco
    Property(S): LicenseIcon = LicenseIco
    Property(S): CompleteIcon = CompleteIco
    Property(S): CustomIcon = CustomIco
    Property(S): NewIcon = NewIco
    Property(S): UpIcon = UpIco
    Property(S): DialogBanner = BannerBmp
    Property(S): Details = 0
    Property(S): ReinstallModeText = omus
    Property(S): Display_IsBitmapDlg = 1
    Property(S): ProductID = none
    Property(S): ISENABLEDWUSFINISHDIALOG = 1
    Property(S): SQLServerVersionText1 = 0
    Property(S): SQLServerVersionText2 = 0
    Property(S): CA_ERRORCOUNT = 0
    Property(S): CA_WARNINGCOUNT = 0
    Property(S): CA_SUCCESSCOUNT = 0
    Property(S): UI_SHOWCOPYRIGHT = yes
    Property(S): ShowUserRegistrationDlg = 1
    Property(S): ButtonTextStyle = {\ButtonTextStyle}
    Property(S): DlgTextStyle = {\DlgTextStyle}
    Property(S): DlgTextStyleB = {\DlgTextStyleB}
    Property(S): DlgTitleStyle = {\DlgTitleStyle}
    Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
    Property(S): FixedStyle = {\FixedStyle}
    Property(S): Error_UninstallDependant = 1
    Property(S): DefaultUIFont = Tahoma8
    Property(S): ProductFeaturesDefined = 1
    Property(S): RBSRegistryKey = Software\Microsoft\Remote Blob Storage
    Property(S): SCHEMASUFFIXVALID = 0
    Property(S): EnableCustomConfigDlg = 1
    Property(S): EnableCustomRemoveDlg = 1
    Property(S): EnableDotNetCheck = 1
    Property(S): FXAssemblyVersion = 2.0.0.0
    Property(S): VSAssemblyVersion = 8.0.0.0
    Property(S): EnableFeatureDlg = 1
    Property(S): MaintenanceWelcomeDlg_Next = MaintenanceTypeDlg
    Property(S): ReadyToRemoveDlg_Back = MaintenanceTypeDlg
    Property(S): CustomerInfoDlg_Next = ReadyToInstallDlg
    Property(S): CustomerInfoDlg_Back = LicenseAgreementDlg
    Property(S): ReadyToInstallDlg_NotInstalled_Back = CustomerInfoDlg
    Property(S): ReadyToInstallDlg_Installed_Back = MaintenanceTypeDlg
    Property(S): InstallWelcomeDlg_Next = LicenseAgreementDlg
    Property(S): LicenseAgreementDlg_Back = InstallWelcomeDlg
    Property(S): LicenseAgreementDlg_Next = CustomerInfoDlg
    Property(S): ModuleID_REDISTBASE = SQLBASE_Redist_64
    Property(S): ErrorDialog = ErrorDlg
    Property(S): MsiLogFileLocation = D:\rbs_install_log.txt
    Property(S): PackageCode = {1AC68E73-94F1-4A01-B229-82B2F73C3326}
    Property(S): ProductState = 5
    Property(S): ProductToBeRegistered = 1
    Property(S): CURRENTDIRECTORY = D:\
    Property(S): CLIENTUILEVEL = 3
    Property(S): CLIENTPROCESSID = 14660
    Property(S): PRODUCTLANGUAGE = 1033
    Property(S): VersionDatabase = 300
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT64 = 601
    Property(S): WindowsBuild = 7601
    Property(S): ServicePackLevel = 1
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): WindowsFolder = C:\Windows\
    Property(S): WindowsVolume = C:\
    Property(S): System64Folder = C:\Windows\system32\
    Property(S): SystemFolder = C:\Windows\SysWOW64\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\MEDSVR~1\AppData\Local\Temp\
    Property(S): ProgramFilesFolder = C:\Program Files (x86)\
    Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
    Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
    Property(S): AppDataFolder = C:\Users\medsvradmin\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\medsvradmin\Favorites\
    Property(S): NetHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Users\medsvradmin\Documents\
    Property(S): PrintHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\medsvradmin\AppData\Local\
    Property(S): MyPicturesFolder = C:\Users\medsvradmin\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): MsiAMD64 = 6
    Property(S): Msix64 = 6
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 8192
    Property(S): VirtualMemory = 6311
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = medsvradmin
    Property(S): UserSID = S-1-5-21-300911508-3398273753-3262312657-1000
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = JPNTKYINT01
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 19
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 13:55:20
    Property(S): Date = 3/23/2015
    Property(S): MsiNetAssemblySupport = 4.0.30319.34209
    Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): DATABASE = C:\Windows\Installer\6847f.msi
    Property(S): OriginalDatabase = D:\RBS.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    Property(S): ROOTDRIVE = D:\
    Property(S): CostingComplete = 1
    Property(S): OutOfDiskSpace = 0
    Property(S): OutOfNoRbDiskSpace = 0
    Property(S): PrimaryVolumeSpaceAvailable = 0
    Property(S): PrimaryVolumeSpaceRequired = 0
    Property(S): PrimaryVolumeSpaceRemaining = 0
    Property(S): DOTNETCOREPATH = 1
    Property(S): SourcedirProduct = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
    Property(S): SOURCEDIR = D:\
    MSI (s) (90:34) [13:55:20:201]: Note: 1: 1728
    MSI (s) (90:34) [13:55:20:201]: Product: SQL Server 2008 R2 Remote Blob Store -- Configuration completed successfully.
    MSI (s) (90:34) [13:55:20:201]: Windows Installer reconfigured the product. Product Name: SQL Server 2008 R2 Remote Blob Store. Product Version: 10.50.1600.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
    MSI (s) (90:34) [13:55:20:217]: Deferring clean up of packages/files, if any exist
    MSI (s) (90:34) [13:55:20:217]: MainEngineThread is returning 0
    MSI (s) (90:A4) [13:55:20:217]: RESTART MANAGER: Session closed.
    MSI (s) (90:A4) [13:55:20:217]: No System Restore sequence number for this installation.
    === Logging stopped: 3/23/2015 13:55:20 ===
    MSI (s) (90:A4) [13:55:20:217]: User policy value 'DisableRollback' is 0
    MSI (s) (90:A4) [13:55:20:217]: Machine policy value 'DisableRollback' is 0
    MSI (s) (90:A4) [13:55:20:217]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (90:A4) [13:55:20:217]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (s) (90:A4) [13:55:20:217]: Restoring environment variables
    MSI (s) (90:A4) [13:55:20:217]: Destroying RemoteAPI object.
    MSI (s) (90:FC) [13:55:20:233]: Custom Action Manager thread ending.
    MSI (c) (44:F8) [13:55:20:233]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (44:F8) [13:55:20:233]: MainEngineThread is returning 0
    === Verbose logging stopped: 3/23/2015 13:55:20 ===

    I copied and pasted the strips from SSMS in another computer
    CREATE
    TABLE [dbo].[Taxonomy](
    [fish_id] [numeric](38, 0)
    IDENTITY(1,1)
    NOT NULL,
    [fish_order] [varchar](50)
    NOT NULL,
    [fish_family] [varchar](50)
    NOT NULL,
    [fish_genus] [varchar](50)
    NOT NULL,
    [fish_species] [varchar](50)
    NOT NULL,
     CONSTRAINT
    [Taxonomy_pk] PRIMARY
    KEY CLUSTERED
    [fish_id] ASC
    )WITH
    (PAD_INDEX
    = OFF,
    STATISTICS_NORECOMPUTE =
    OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS
    = ON,
    ALLOW_PAGE_LOCKS =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]

  • I can Ping FW inside interface but can not connect to remote resources

    dear all
    i configer my asa 5520 through ASDM to enable VPN Connection , i follow the cisco steps and it works fine and the anyconnect version 3.1 in Windows 8 - one day troubleshoot for this point only - can connect and have an IP address from the range , but i have something wrong in NAT may be because all guides talking about old ASDM ( NAT Exempt) but i am confeused to apply it on the new ASDM.
    i can ping the inside interface  from my labtop which using anyconnect , but i can not access anything else inside my network
    Please anyone has a solution , please describe it using ASDM , thanks for help
    This is my configuration
    interface GigabitEthernet0/1
    description
    nameif SRV_ZONE
    security-level 50
    ip address 192.168.1.1 255.255.255.0
    interface GigabitEthernet0/2
    description
    nameif TRUST_ZONE
    security-level 100
    ip address 172.17.200.1 255.255.255.0
    interface GigabitEthernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif MGMT
    security-level 0
    ip address 10.10.10.1 255.255.255.0
    dns server-group DefaultDNS
    domain-name xxx.xxx.xxx
    object network obj-192.168.1.11
    host 192.168.1.11
    object network obj-xxx.xxx.xxx.xxx
    host xxx.xxx.xxx.xxx
    object service obj-tcp-source-eq-25
    service tcp source eq smtp
    object network obj-192.168.1.12
    host 192.168.1.12
    object network obj-xxx.xxx.xxx.xxx
    host xxx.xxx.xxx.xxx
    object network obj-192.168.1.0
    subnet 192.168.1.0 255.255.255.0
    object service obj-tcp-eq-25
    service tcp destination eq smtp
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network obj-0.0.0.0
    host 0.0.0.0
    object network obj_any-01
    subnet 0.0.0.0 0.0.0.0
    object network obj-172.17.8.8
    host 172.17.8.8
    object network obj-172.17.0.0
    subnet 172.17.0.0 255.255.0.0
    object network obj_any-02
    subnet 0.0.0.0 0.0.0.0
    object network obj_any-03
    subnet 0.0.0.0 0.0.0.0
    object network obj_any-04
    subnet 0.0.0.0 0.0.0.0
    object network obj_any-05
    subnet 0.0.0.0 0.0.0.0
    object network obj_any-06
    subnet 0.0.0.0 0.0.0.0
    object network obj.172.17.8.115
    host 172.17.8.115
    object network obj.xxx.xxx.xxx.xxx
    host xxx.xxx.xxx.xxx
    object service http
    service tcp source eq www destination eq www
    object network obj.xxx.xxx.xxx.xxx
    host xxx.xxx.xxx.xxx
    object service https
    service tcp source eq https destination eq https
    object service newservice
    service tcp source eq pop3 destination eq pop3
    object network mail
    host 172.17.8.8
    description mail     
    object network 192.168.1.11
    host 192.168.1.11
    description smtp     
    object service smtpnew
    service tcp source eq 587 destination eq 587
    object network VPN_RANGE
    description VPN ACCESS RANGE  
    object network VPN_PoOL
    subnet 172.17.16.0 255.255.255.0
    description vpn
    object-group network DM_INLINE_NETWORK_1
    network-object host 192.168.1.11
    network-object host 192.168.1.12
    object-group network Eighth_Floor
    network-object 172.17.8.0 255.255.255.0
    object-group service WEB_SERVICES
    service-object tcp destination eq www
    object-group network ENT_SERVERS
    network-object host 192.168.1.11
    network-object host 192.168.1.1
    object-group network DM_INLINE_NETWORK_2
    network-object 172.17.200.0 255.255.255.0
    network-object 172.17.8.0 255.255.255.0
    object-group service DM_INLINE_TCP_2 tcp
    port-object eq www
    port-object eq https
    port-object eq smtp
    object-group service web tcp
    port-object eq www
    port-object eq xxx
    port-object eq ftp
    port-object eq xxx
    port-object eq xxx
    object-group service xxx_Web_and_Email
    service-object object http
    service-object tcp destination eq pop3
    service-object tcp destination eq smtp
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group protocol DM_INLINE_PROTOCOL_1
    protocol-object udp
    protocol-object tcp
    object-group protocol DM_INLINE_PROTOCOL_2
    protocol-object ip
    object-group protocol DM_INLINE_PROTOCOL_3
    protocol-object ip
    access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 172.17.0.0 255.255.0.0
    access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 any
    access-list justice_splitTunnelAcl standard permit 10.100.100.0 255.255.255.0
    access-list xxx-VPN_splitTunnelAcl remark vpn
    access-list xxx-VPN_splitTunnelAcl standard permit 172.17.16.0 255.255.255.0
    access-list xxx-VPN_splitTunnelAcl standard permit any
    access-list cap extended permit tcp any host xxx.xxx.xxx.xxx eq smtp log
    access-list cap1 extended permit tcp host 192.168.1.11 any eq smtp
    access-list SRV_ZONE_nat_outbound extended permit tcp 192.168.1.0 255.255.255.0 any eq smtp
    access-list SRV_ZONE_nat_outbound extended permit ip host 192.168.1.11 any
    access-list TRUST_ZONE_access_in extended permit ip host 172.17.88.108 any
    access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_2 10.10.3.0 255.255.255.0 any
    access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_3 10.10.50.0 255.255.255.0 any
    access-list TRUST_ZONE_access_in extended permit ip 172.17.8.0 255.255.255.0 any
    access-list TRUST_ZONE_access_in extended permit ip 172.17.200.0 255.255.255.0 any
    access-list TRUST_ZONE_access_in extended permit ip 172.17.0.0 255.255.0.0 host 192.168.1.12
    access-list TRUST_ZONE_cryptomap extended permit ip xxx.xxx.xxx.xxx 255.255.255.248 any
    access-list outside_access_in extended permit tcp any host 192.168.1.11 eq smtp
    access-list outside_access_in extended permit tcp any host 172.17.8.8 eq www
    access-list outside_access_in extended permit tcp any host 192.168.1.12 object-group web
    access-list outside_access_in extended permit tcp any host 172.17.8.8 eq pop3
    access-list outside_access_in extended permit ip 172.17.16.0 255.255.255.0 any inactive
    access-list vpn remark vpn
    access-list vpn standard permit 172.17.16.0 255.255.255.0
    pager lines 24
    logging enable
    logging trap informational
    logging asdm informational
    logging host TRUST_ZONE 172.17.8.100
    mtu INT_ZONE 1500
    mtu SRV_ZONE 1500
    mtu TRUST_ZONE 1500
    mtu MGMT 1500
    ip local pool VPN_POOL 172.17.16.100-172.17.16.254 mask 255.255.255.0
    ip verify reverse-path interface INT_ZONE
    ip verify reverse-path interface SRV_ZONE
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    icmp permit any SRV_ZONE
    icmp permit any TRUST_ZONE
    asdm image disk0:/asdm-635.bin
    no asdm history enable
    arp timeout 14400
    nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.11 obj-xxx.xxx.xxx.xxx service any obj-tcp-source-eq-25
    nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.12 obj-xxx.xxx.xxx.xxx
    nat (SRV_ZONE,INT_ZONE) source dynamic obj-192.168.1.0 interface service obj-tcp-eq-25 obj-tcp-eq-25
    nat (INT_ZONE,SRV_ZONE) source static any any destination static 192.168.1.11 obj-172.17.8.8 service obj-tcp-source-eq-25 obj-tcp-source-eq-25
    nat (TRUST_ZONE,INT_ZONE) source static VPN_PoOL VPN_PoOL destination static VPN_PoOL VPN_PoOL
    object network obj_any
    nat (SRV_ZONE,INT_ZONE) dynamic obj-0.0.0.0
    object network obj_any-01
    nat (SRV_ZONE,MGMT) dynamic obj-0.0.0.0
    object network obj-172.17.8.8
    nat (TRUST_ZONE,INT_ZONE) static xxx.xxx.xxx.xxx service tcp www www
    object network obj-172.17.0.0
    nat (TRUST_ZONE,SRV_ZONE) static 172.17.0.0
    object network obj_any-02
    nat (TRUST_ZONE,INT_ZONE) dynamic interface
    object network obj_any-03
    nat (TRUST_ZONE,SRV_ZONE) dynamic interface
    object network obj_any-04
    nat (TRUST_ZONE,INT_ZONE) dynamic obj-0.0.0.0
    object network obj_any-05
    nat (TRUST_ZONE,SRV_ZONE) dynamic obj-0.0.0.0
    object network obj_any-06
    nat (TRUST_ZONE,MGMT) dynamic obj-0.0.0.0
    object network obj.172.17.8.115
    nat (TRUST_ZONE,INT_ZONE) static obj.xxx.xxx.xxx.xxx service tcp www www
    object network mail
    nat (TRUST_ZONE,INT_ZONE) static obj-xxx.xxx.xxx.xxx service tcp pop3 pop3
    nat (TRUST_ZONE,INT_ZONE) after-auto source static obj-172.17.8.8 obj-xxx.xxx.xxx.xxx service https https
    access-group outside_access_in in interface INT_ZONE
    access-group DMZ_access_in in interface SRV_ZONE
    access-group TRUST_ZONE_access_in in interface TRUST_ZONE
    route INT_ZONE 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
    route TRUST_ZONE 10.10.0.0 255.255.0.0 172.17.200.254 1
    route TRUST_ZONE 10.11.0.0 255.255.0.0 172.17.200.254 1
    route TRUST_ZONE 10.12.0.0 255.255.0.0 172.17.200.254 1
    route TRUST_ZONE 10.13.0.0 255.255.0.0 172.17.200.254 1
    route TRUST_ZONE 172.17.0.0 255.255.0.0 172.17.200.254 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication enable console LOCAL
    aaa authentication http console LOCAL
    aaa authentication ssh console LOCAL
    aaa authentication serial console LOCAL
    http server enable
    http 172.17.8.0 255.255.255.0 TRUST_ZONE
    http 172.17.8.155 255.255.255.255 TRUST_ZONE
    http 172.17.8.45 255.255.255.255 TRUST_ZONE
    http 10.10.10.2 255.255.255.255 MGMT
    http 192.168.1.12 255.255.255.255 SRV_ZONE
    http 0.0.0.0 0.0.0.0 INT_ZONE
    http 172.17.200.0 255.255.255.0 TRUST_ZONE
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto dynamic-map pol 1 match address TRUST_ZONE_cryptomap
    crypto dynamic-map pol 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map INT_ZONE_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map TRUST_ZONE_map0 1 ipsec-isakmp dynamic pol
    crypto map TRUST_ZONE_map0 interface TRUST_ZONE
    crypto map INT_ZONE_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map INT_ZONE_map0 interface INT_ZONE
    crypto ca trustpoint ASDM_TrustPoint0
    enrollment self
    fqdn SEC-xxx-FW1
    subject-name CN=SEC-xxx-FW1
    no client-types
    proxy-ldc-issuer
    crl configure
    crypto ca trustpoint ASDM_TrustPoint1
    enrollment self
    subject-name CN=SEC-xxx-FW1
    keypair sslvpnkeypair
    crl configure
    crypto ca certificate chain ASDM_TrustPoint0
    certificate 31
        57f4e52e 6b851966 77515d62 c209a0df 1c32ce94 bb90cbce 497cfd04 6745ea85
        efb75f85 2ae1ad35 344d94ab 915e01ab d3292626 ac697a52 b4ed6632 d3ed2332 ae
      quit
    crypto ca certificate chain ASDM_TrustPoint1
    certificate e6054352
        c64f3661 30f14c3d 06b5f039 9f14560d 3b154fd1 42782268 7531689e 8e547d91
        85e88415 e326f653 74733a6c a3f5c935 f7e83f56 f6
      quit
    crypto isakmp enable INT_ZONE
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 65535
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 INT_ZONE
    ssh 172.17.8.0 255.255.255.0 TRUST_ZONE
    ssh 10.10.10.2 255.255.255.255 MGMT
    ssh timeout 5
    console timeout 0
    management-access TRUST_ZONE
    vpn load-balancing
    interface lbpublic INT_ZONE
    interface lbprivate INT_ZONE
    priority-queue INT_ZONE
      tx-ring-limit 256
    threat-detection basic-threat
    threat-detection scanning-threat
    threat-detection statistics host number-of-rate 3
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ssl trust-point ASDM_TrustPoint1 INT_ZONE
    webvpn
    enable INT_ZONE
    svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
    svc enable
    tunnel-group-list enable
    group-policy xxx-VPN internal
    group-policy xxx-VPN attributes
    dns-server value xx.xx.xx.xx xx.xx.xx.xx
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value xxx-VPN_splitTunnelAcl
    group-policy DfltGrpPolicy attributes
    vpn-tunnel-protocol webvpn
    group-policy GPNEW internal
    group-policy GPNEW attributes
    dns-server value 172.17.8.41
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    default-domain value xxx.xxx.xxx
    address-pools value VPN_POOL
    username VPNAM password xxx encrypted
    username VPNAM attributes
    service-type remote-access
    vpn-group-policy xxx-VPN
    tunnel-group xxx-VPN type remote-access
    tunnel-group xxx-VPN general-attributes
    dhcp-server 172.17.8.41
    tunnel-group xxx-VPN ipsec-attributes
    pre-shared-key *****
    tunnel-group pol type ipsec-l2l
    tunnel-group pol ipsec-attributes
    pre-shared-key *****
    trust-point ASDM_TrustPoint0
    tunnel-group SSLClientProfile type remote-access
    tunnel-group SSLClientProfile general-attributes
    address-pool VPN_POOL
    default-group-policy GPNEW
    tunnel-group SSLClientProfile webvpn-attributes
    group-alias SSLVPNClient enable
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
      inspect ip-options
      inspect pptp
    service-policy global_policy global
    prompt hostname context
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:78a941e3f509dec8f3570c60061eedaa
    : end

    thanks god
    i solve the problem
    the problem is in NAT
    i creat an object with the ip address host from VPN pool and name it vpn
    then i do the nat from inside to that host as the following picture...
    trust zone is the inside zone
    vpn is the outside vpn host...
    thanks and hope it helps anyone else...

  • Remote access VPN with Cisco Router - Can not get the Internal Lan .

    Dear Sir ,
    I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .Please see the attachment for Scenario, Configuration and Ping status.
    I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
    Below is the IP address of the device.
    Local PC connect with Router -2 (Through MS Loopback) Router -2 Router-1 PC -01
    IP Address :10.10.10.2 Mask : 255.255.255.0 F0/01
    IP address:10.10.10.1
    Mask:255.255.255.0 F0/0
    IP Address :20.20.20.1
    Mask :255.255.255.0
    F0/1
    IP address :192.168.1.3
    Mask:255.255.255.0
    F0/0
    IP address :20.20.20.2
    Mask :255.255.255.0
    F0/1
    IP address :192.168.1.1
    Mask:255.255.255.0
    I can ping from local PC to the network 10.10.10.0 and 20.20.20.0 .Please find the attach file for ping status .So connectivity is ok from my local PC to Remote Router 1 and 2.
    Through Cisco remote vpn client, I can get connected with the VPN Router R1 (Please see the VPN Client pic.)But cannot ping the network 192.168.1.0
    Need your help to fix the problem.
    Router R2 Configuration :!
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname R2
    boot-start-marker
    boot-end-marker
    no aaa new-model
    memory-size iomem 5
    no ip icmp rate-limit unreachable
    ip cef
    no ip domain lookup
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    ip tcp synwait-time 5
    interface FastEthernet0/0
    ip address 20.20.20.2 255.255.255.0
    duplex auto
    speed auto
    interface FastEthernet0/1
    ip address 10.10.10.1 255.255.255.0
    duplex auto
    speed auto
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    control-plane
    line con 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line aux 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line vty 0 4
    login
    end
    Router R1 Configuration :
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname R1
    boot-start-marker
    boot-end-marker
    aaa new-model
    aaa authentication login USERAUTH local
    aaa authorization network NETAUTHORIZE local
    aaa session-id common
    memory-size iomem 5
    no ip icmp rate-limit unreachable
    ip cef
    no ip domain lookup
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    username vpnuser password 0 strongpassword
    ip tcp synwait-time 5
    crypto keyring vpnclientskey
    pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123
    crypto isakmp policy 10
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp client configuration group remotevpn
    key cisco123
    dns 192.168.1.2
    wins 192.168.1.2
    domain mycompany.com
    pool vpnpool
    acl VPN-ACL
    crypto isakmp profile remoteclients
    description remote access vpn clients
    keyring vpnclientskey
    match identity group remotevpn
    client authentication list USERAUTH
    isakmp authorization list NETAUTHORIZE
    client configuration address respond
    crypto ipsec transform-set TRSET esp-3des esp-md5-hmac
    crypto dynamic-map DYNMAP 10
    set transform-set TRSET
    set isakmp-profile remoteclients
    crypto map VPNMAP 10 ipsec-isakmp dynamic DYNMAP
    interface FastEthernet0/0
    ip address 20.20.20.1 255.255.255.0
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    crypto map VPNMAP
    interface FastEthernet0/1
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    ip local pool vpnpool 192.168.50.1 192.168.50.10
    ip forward-protocol nd
    ip route 10.10.10.0 255.255.255.0 FastEthernet0/0
    no ip http server
    no ip http secure-server
    ip nat inside source list NAT-ACL interface FastEthernet0/0 overload
    ip access-list extended NAT-ACL
    deny ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
    permit ip 192.168.1.0 0.0.0.255 any
    ip access-list extended VPN-ACL
    permit ip 192.168.1.0 0.0.0.255 192.168.50.0 0.0.0.255
    control-plane
    line con 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line aux 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line vty 0 4
    end

    Dear All,
    I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .
    Please see the attachment for Scenario, Configuration and Ping status. I am getting IP address when i connect through VPN client .But I can not ping to the internal lan -192.168.1.0.Need your help to sole the issue.
    Waiting for your responce .
    --Milon

  • Apple TV, iPad, iPhone home sharing how to wake a sleeping mac from these devices? Can wake from iMac using remote desktop fine.

    Hello all!
    To give you an over view of system I have, iMac, Mac Mini, Apple TV 3, ipad 1, IPhone 4.
    I have all music and video stored on the mac mini that is in the roof and I control it using apple remote desktop from my iMac. I can wake it no problem etc and I have now been using it with home sharing and it works fantasticly with the apple tv and ipad etc but the issue is as follows.
    How can I wake the mac mini in the roof from the apple tv when it dissapears off the ipad / apple tv when it goes to sleep?
    Its the only issue I can see in an amazing setup that I think apple needs to advertise more as its flipping brilliant!
    I hope you can help me with this other wise I will have to leave the mini on 24/7 which is poor!
    Please don't say turn wake fromlan on the mini as its on and working.
    Thanks for any help!!
    Spoony

    This problem, for reasons unknown to me, has resolved itself on its own. After several attempts finally everything decided to work. How does stuff like this happen? Thank you.

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

Maybe you are looking for