I can only access saved photos in PSE, they are on my hard drive but I can't have them printed and can only look at them in PSE! Why can't I do anything with the photos after I worked them up and saved them?

Why can't I access my worked up saved photos only in PSE? It won't let me have do anything with them only in PSE I can't even send them to be printed!!!!!

Have you been able to upload them to be printed in the past?
How are you going about this?
What happens when you try to print to your desktop printer?

Similar Messages

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • I backed up my macbook pro before they intalled a new hard drive but when I reinstalled, my book says it isn't compatible with Maverick and I can't get the last year of pictures or files back.

    I backed up my macbook pro before having a new hard drive installed. They installed Maverick for me, but now My Book says its not compatible and I can't restore my files and pictures from the external hard drive. What can I do?

    Simple if you have a complete backup of your old drive erase the new one and restore from your Time Machine backup. That will put your Mac back to exactly like it was before you had the hard drive changed.
    In all honesty I have no idea why most all the Apple stores upgrade every Mac that comes through to Mavericks.
    To do the erasing and restoring you need to either boot from the original system discs that came with your Mac or if it came with either Lion or Mt Lion use the Online Internet Recovery system. To boot to that at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. Once thje Mac OS X Utilities screen loads use Disk Utility to Repartition the drive as one partiotion to remove all data from it. Then when that is done exot disk Utility and select Restore from Time Machine Backup. Have the TM backup drive connected before you start this process.

  • Why iPhoto isn´t starting? with the Guest-Acc it works?

    I´ve tried the Save-Start and no success... when I start my Mac with an other Account, iPhoto words... but only then...
    When I start iPhoto, i get a Message, that asks, if my library is used by an other programm etc.

    What version of iPhoto? Assuming 09 or later
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT1751 I am trying to backup my iTunes to an external hard drive, but it won't let me click and drag or copy and paste into the external drive.

    I am trying to backup my iTunes to an external drive, but my Mac won't let me drag and drop into the external drive or any of its folders.
    Any suggestions?
    Thanks,

    I think I know what I did....my external hard drive has been used to back up my PC.  I was trying to back up my iTunes on my Mac.  I forgot that the formats mattered.  Thanks.

  • Can't click on anything using the cursor after saving or printing.

    So I'm using CS3 on Mac with 10.4.11 on a 2 x 2.66 Ghz Dual-Core Intel Xeon, 5GB of 667 MHz DDR2-DIMM ram machine. Also I have a Wacom Intuos 3 Graphics Tablet.
    Basically, after I print or save ANY file in illustrator, right after it's completed without warnings or error messages, I have no ability to click on any object on the pasteboard or click on any tools or pallettes. i can use items from the top menus and keyboard shortcuts. Also it SOMETIMES happens after using the live trace command. My current work around is to open a new document, close it and return to the page without problems.
    Seriously annoying!
    Has anybody had this issue?
    thanks
    mel

    I've tried all the above except the safe mode boot. That's because I started to suspect the plugins i've added. I have added the CadTools and Scriptographer plugins. removing each from the my plugin folder separately revealed that Scriptographer is the culprit. Thankfully it wasn't Cadtools as that's more critical for me.
    thanks for your help.

  • HT1449 i have bought a new iPod touch and when i went to sync my iTunes library most of the songs didn't come across they get a explanation mark at the side they are whole cds of music. but i didn't have this problem on my old ipod touch when i was using

    I have bought a new ipod touch and when i went to sync my music library on to it only a few songs went over, the ones that didnt had a ! next to them. I had no problem when using my last ipod touch but i was using a pc at the time not a mac though.

    Hi there,
    This usually meas that iTunes can't find the original files. I would recommend taking a look at the article below for some tips on locating that lost media.
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    -Griff W.

  • I have iPad 1st generation running 5.1.1. I'm trying to validate my account. I get to the point where apple says they are sending a validation email but I don't receive them. I've had apple resend the email 3 times but still no email

    HI. I'm running 5.1.1 on iPad 1st generation. I'm trying to set up my account. Apple says it will send validation email but i haven't received it. I've tried numerous attempts at getting the email resent but I still haven't received anything

    Have you checked your junk mail folder?

  • One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

    One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • HT1212 So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

    So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT201441 i have bought a second hand iphone 4s which is stilllinked to previous owners itunes ID.I cant get his details off him as he has his money and is blanking me. I can't get anything on the phone after setting up the language.HELP!!

    I cannot activatea second hand iphone 4s as i don't have previous owners itunes ID. I can't get anything on the phone after setting the language as its asking for activation. Please can anyone help ???? Ideally i would like to get it back to factory settings and start afresh but right now i would settle for anything. Should say i only have the phone and charger, no box so no details

    Unfortunately, the only one who can help is the previous owner.  Otherwise you will not be able to activate and use the phone.  Apple can't/won't help you with this either.

  • When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

    When I connect my ipad to the computer and click import photos and videos, the computer says that there are no photos or videos on the ipad it says the file is empty I can't even add anything to the file!!!!!

    It looks like the card may be the problem, and your best bet is to try the Card Reader - this will make the card accessible by the Finder and you may be able to drag the pics off to the desktop or, at worst, try recover the pics with an app like MediaRecover
    Regards
    TD

  • How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be viewed in itunes, but none on the external will sync to my iPad.  What's up with that.

    How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be marked or unmarked in itunes, but none of the photos stored on the external drive will sync to my iPad.  Anybody know what's up with that?

    What really cheeses me off here is that Apple isn't allowing users enough customization.  With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options.  If Apple keeps this up, they're going to start losing customers fast.  I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
    What I don't understand about how they won't let users delete the list of available podcasts now is why?  How is this making it a better program?  I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was).  But to not give users the option to delete that list?  It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating.  I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature.  It smacks of rank incompetence.
    What improvement were they trying to make here anyway?  There was nothing wrong to my mind about how podcasts were managed in previous versions.  Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
    And reverting to a previous version is no solution.  I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

Maybe you are looking for

  • IGNORE COMMENTS IN EXTERNAL TABLE

    I currently have a partitioned table, split by month going back some 7 years. The business have now agreed to archive off some of the data but to have it available if required. I therefore intend to select month by month, the data to a flat file and

  • Web util out of box

    As we all know webutil was not supported by oracle in forms 6i and 9i. Can some one please give the information 1.which version of forms has webutil available out of box, i.e. where it will be installed as part of forms 9ias services. 2.From which ve

  • Read the pdf file from the Third party server.

    hi all, we got the requirement that we have to display the salary statement and form16 in the portal. we are not using the sap for the pay roll. pay roll will run by the third party....they will keep all salary slips in the one folder under the serve

  • Error 1005 in Photos

    I am having trouble moving photos out of the new Photos app. I tried dragging an dropping, I tried dragging to PS Elements and then I tried exporting to a file on my desktop. Each time I get this message. It seems I cannot export ... any suggestions?

  • BAPI_GET_PAYSLIP_HTML alignment issues (spacing)

    Has anyone used BAPI_GET_PAYSLIP_HTML with success? When we run this BAPI and display the resulting html, the alignment, or spacing, is incorrect for some lines of the payslip. I asked SAP support about this and they said there is nothing wrong with