I can Only Burn using iTunes !

Greetings
I've been having this weird problem on my MacBook Pro 15.4
when i try to burn anything (( Data CD for example )) I always get an error message in the middle of the burning process then the burning stops
While i can burn Music CDs from iTunes without any problem using any speed on any medium.
I've tried Toast and disk utilities and both failed
Any solution ?!

Yes I have done that and the recording TAB is there. I have even been into the registry and checked that the drive is setup to write the right format discs, which it is.
Don't believe there are any virtual CD burners there. It does start the process of writing the discs when creating from explorer, it just says there is no disc in the burner (it does even try to spin the disc). From media player it just says there is no burner at all. Yet Itunes is fine.
Having read other forums, I think it's the drive itself.
[Edited by: admin]

Similar Messages

Can only burn using one kind of blanks

Hi,
I realize that this is probably a burner issue, but any help in the right direction would be appreciated. I'm using a Lightscribe DVD/CD writer and I cannot use any other blank discs other than Jujifilm. If I use TDKs or Sonys, the burn aborts at various times in the process and this occurs with multiple burn programs (iTunes, Nero).
The easy fix is to only buy Fujifilms, but I have a new spindle of Sonys that are rapidly becoming coasters. Any help in figuring this probably out will save me booting the PC out the window. Thanks to all.
I ran a diagnostic and found this (sorry for the length):
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Compaq Presario 061 EL435AA-ABA SR1720NX NA610
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: ATI RADEON XPRESS 200 Series\ATI RADEON XPRESS 200 Series
IDE\DiskST3160021A_____________________________8.11___, Bus Type ATA, Bus Address [0,0]
IDE\DiskST3200822A_____________________________3.01___, Bus Type ATA, Bus Address [1,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomHPDVD_Writer_740b______________________HI24___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: HP DVD Writer 740b, Rev HI24
Audio CD in drive.
Found 22 songs on CD, playing time 58:08 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 01:19:27
Track 3, start time 02:58:37
Track 4, start time 05:21:19
Track 5, start time 09:10:19
Track 6, start time 12:05:36
Track 7, start time 15:07:15
Track 8, start time 17:57:71
Track 9, start time 21:54:26
Track 10, start time 24:52:51
Track 11, start time 28:14:59
Track 12, start time 29:38:07
Track 13, start time 32:29:42
Track 14, start time 34:39:59
Track 15, start time 35:07:37
Track 16, start time 35:59:46
Track 17, start time 40:30:30
Track 18, start time 43:04:10
Track 19, start time 47:30:47
Track 20, start time 49:34:54
Track 21, start time 50:51:06
Track 22, start time 54:51:52
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 40.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: HP DVD Writer 740b on CDR media at speed 40X.
Thanks for any help.
J.

Sorry, wrong forum...reposted to the Windows forum.

How can i burn an itunes downloaded movie to dvd?

I have purchased movies from itunes, downloaded them and can only burn them to data DVD...which is useless in a DVD player. How can I burn these movies to DVD so that I can view them on a DVD player?

You are not licensed to burn any iTunes video products, regardless of whether it's to a data DVD or a playable DVD.
See the iTunes Terms & Conditions, Usage Rules v. "(v) You shall not be entitled to burn video iTunes Products or tone iTunes Products." Additionally, you are only licensed to use iTunes products on iTunes authorized devices, which DVD players are not.

Can I burn an iTunes movie to DVD?

I have an older powerbook g4 with dvd burner but can't seem to burn movie from itunes. Anyone have suggestions? Thanks

You can only burn movies to a backup DVD in iTunes; they cannot be burned to a video DVD. If the movie isn't DRM protected, use software such as iMovie and iDVD to create a video DVD of it.
(33817)

How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

I can only access the itunes library if i plug in my external hard drive. is there a way to add the music to my internal hard drive?

i can only access my itunes library if i plug in my external hard drive. how do i find where the itunes songs are on my external hard drive and how do i move them to my computers internal hard drive so i no longer have to have the external hard drive plugged in?

When the drive is connected, use the Organize Library command in iTunes. If the entire library is located there, drag it to the internal drive, launch iTunes with the Shift key held down, and point it there.
(59363)

Can an American use iTunes from outside the US to download movies?

Can an American use iTunes from outside the US to download movies? The Terms & Conditions that just popped up as I was going to download a movie seems to indicate "no." So Americans traveling abroad are out of luck?

You can only use the Store for the country that reflects your billing address. This applies worlwide, not just to Americans.

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating.

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating. There is no option found for using account credit.

I just logged out of my daughter's account and back in, and now it works. Deducted from gift card account balance. So I hope this is resolved.

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

Re: "Item category K can only be used without account assignment"

Hi,
while creating PO from PR the following error is coming.
"Item category K can only be used without account assignment"
How to solve this
Regards,

Hello,
Item category K cannot be used with an account assignment as the goods are not physically used in the company. The stock is stilla consignment stock and belongs to vendor. Using an account assignment will book the cost in the company's expenses.
use an account assignment if required when you transfer from consignment to own stock.
Hope this helps,
Regards,
VS

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

I have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2

Item category S can only be used with account assignment category

Hello Gurus,
When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
for my plant and material.
Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
I think there is a problem in plant or a material.
Please help me.
BR

Hi,
How you are creating PO ,so that you have error "Item category S can only be used with account assignment category"
Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for with account assignment category.
Cross check transaction variant or screen variant used for your PO creation!
Regards,
Biju K

Alternatives can only be used once?

Hi
In the Adobe form when creating an alternative I've discovered that it can only be used once.
Is this correct?
I've created an alternative e.g. name = FLAG_IS_X condition flag = X.
When I use the alternative 'FLAG_IS_X' the first time it works as required.
However, when I use it a second time on the form it does not work at all.
Does this mean that a different alternative with the same condition has to be created even though the condition you want to use is the same?
Thanks

Hey,
Well I stumble it seems on the same 'issue' . I have 3 master pages and have the requirement to put a watermark on it depending on the status. The first master is in portrait and contains the contact details, the second master page contains the line items and is in landscape and the third one contains the totals and is back portrait.
First I had only one alternative and used it on the 3 masterpage to check if the watermark had to be printed. In this case it was only correct for the first page (contact-info) the rest all received the mark although they should not.
Then I made 3 altenatives (one for each type of master page) all checking the same condition.
This way it was correct for page 1 (contacts), the first page of the items (the two others had the watermark although they should not - so not correct) and the last page with the totals.
In my case the contacts-page and totals-page can only have a page-count of 1 but I'm almost sure that if they could have a page count of 2 or more then only the first page would be correctly printed.
Is this a bug you think?
Faaiez,
Did you find in the end a workaround for this?
Otto.
Any suggestion of how I could handle this with scripting (no experience with scripting though)
Anyway tnx already for all the input !!
best regards,
Bart V.

I can Only Burn using iTunes !

Similar Messages

Maybe you are looking for