I can only get internet on Wi-Fi. how i can i get it everywhere??
hey people
i need help, i can only use browser on wifi i cant get n internet when im out anywhere
do i need a new app to do this??
Hi
toshiBB wrote:
hey people
i need help, i can only use browser on wifi i cant get n internet when im out anywhere
do i need a new app to do this??
Probably not but more information will be needed before making suggestions. Please provide as much as you are able of the the following
Blackberry Model.
Carrier Name.
Do you have a Data Plan?
Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
Memory for Device and SD Card Options > Memory
Any error statement or code.
The Exact nature of problem - the more info the better.
When this started and whether it started just after an update or new App download and which App/s theme/s download.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>
Similar Messages
-
After updating my iphone 5s to IOS 8.0.2, I cant get internet on my 3g anymore. Can only get it when hooked to wifi. Tried restore, tried restart, fixed settings. Help?!?!?!?!?
Hi diamondjill419,
Here is an article that can help you troubleshoot this cellular data issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
RV042 - I have customer who upgraded to 20 meg cable internet service and can only get 10 meg thru the router. The customer had upgrade to a 20 meg cable internet service from a 10 meg service. The customer is only able to get the 20 meg service going from cable modem to PC. If he goes thru the RV042 router, he is only getting up to 10.7 down and 1.37 up. Additional steps taken….He had a Linksys SRW224P switch connected to the RV042 router and we had disconnected this switch for testing purposes. We performed the speed test again and we get the same speed results so we know the switch is not the issue.He had upgraded to firmware version 1.3.12.19 – TM Feb 13, 2009 – tested speed and no change.We accessed the web management interface and tried several modifications. This includes the following…..- We disabled the firewall – no change- We disabled SPI with is the Stateful Packet Inspection (I was thinking this one would do it) – no change in speed.- We disabled DoS (Deny of Service) – no change.- We set MTU to Manual and tested various byte increments based on MTU ping testing. – Once again, no change in speed. He is NOT using Load balancing on the routerHe has NO access rules but does have a few port forwards. Finally, with each change, he is saving the changes on the router.
You are expecting 20MB throughput on a $150 router? Well, ok, maybe.. Can you check on your router or switch if the port is set or auto negotiated to 10 or 100? That could explain 10MB limit (although technically a 10Mb port is considered 20Mb theoretical max throughput as 100Mb port is considered 200Mb per Cisco). So maybe you ended up with 10/half somehow? MTU 1500 would also be good for that connection I think and to try to get max throughput.
-
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
How can I view a PDF file on my IPad? I only get the first page.
How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.
Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required. -
can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?
Hi, Alan -
How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
You can, but you'll need to expand your cabling a bit.
You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem. -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
If someone includes a photo in the email body message (I use yahoo), if I right click on the image to save it to my computer, I only get the option to save it as a firefox document - secure download. If I save it as such and then click on the link, it takes me to a page full of weird code.
Please advise. I would like to be able to right click on the photo as save the image to my computer.If Firefox doesn't saves the image with a valid image file extension like .jpg or .png then you need to add that file extensions yourself. You can rename already saved images and change the file extension to get working images. Add quotes around the name while renaming ("image.jpg") if Windows hides the current file extension or refuses to change the name (i.e you get image.jpg.html).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
My ipad has a different email address than my iPhone, both are mine but I can only get FaceTime to work on my iPhone but seem unable to change the email address in that field
If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation
-
How can I sync my iPad with iTunes? Only getting "setup" options.
Im trying to get my iTunes songs on my New iPad. But when I connect it I only get the question if I wanna "set up" or "restore". I have the newest iTunes and its the first time i connect my iPad to my mac. How can i get it to understand that it is already set up, and that I dont want to restore it?
But since I dont have any backup, then everything on my ipad will be ereased and I will have to start all over again right?
-
I have a personal email calendar kept on Outlook 2010, I also have an Exchange calender on Outlook. I want to sync both calendars with my Iphone 5 / 6.1.2 but ITunes only sees the exchange calendar.
How can I get Itunes to see both calendars?Hi,
you don't need MobileMe or anything fancy. I personally sync my Outlook calendar and my Outlook address book with three computers (two at the office and one at home)and besides I run Office 2003 on one, Office 2007 on the other and Office 2010 on the third, so it can't get more complicated than that, but it works 100%.
First sync Outlook with iTunes on one computer, having done that when you try to sync it to another machine, iTunes will recognize that it is synced with another computer and ask you if you want to merge the data, say yes, That's all there is to it.
It does not work for music as you rightly say but as far as Calendars and Contacts are concerned it's flawless and transparent.
If you hit a snag talk back to me.
Cheers. -
Just got new iPad mini and I can only get 140 pictutes in My Photo Stream while in my other devices I have 1000 photos in My Photo Stream. How do I sync to have all photos in My Photo Stream on this new iPad mini?
Hi Jose Sam,
It sounds like some of your photos are over 30 days old.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
I see different photos in My Photo Stream on each of my devices.
Your device will keep up to 1000 photos, even if they are older than 30 days. Photos older than 30 days are removed from the iCloud server, so all devices may not have the same photos, depending on when you enabled My Photo Stream.
You may want to sync the older photos through iTunes to get them on your new iPad mini.
Thank you for visiting Apple Support Communities.
Nubz -
How can I print Double A4 with HP Officejet 6500? I only get the first page...
I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter -
Audigy 4 Pro - can only get 2 channel sound via SPDIF/optical connecti
I have two PC's, one with an Audigy 4 Pro and one with an Audigy 2 Platinum (A2P), I have my 5. speakers hooked up to the A2P and the A4P connected via the SPDIF to the A2P, I would expect to get 5. - both are setup to use 5. speakers, (I know that as a standard Digital coax/optical connections should handle multi speaker configs my entire A/V sound system (7. Dolby) uses optical and coax and it works fine).
If I run the channel test on the Audigy 4 I can get nothing but sound through the left and right speakers, if I run the test on the Audigy 2 (speakers direct connected) the sound is fine, if I reconnect the speakers to my Audigy 4 I get sound on all speakers so it looks like its an issue with the SPDIF and optical inputs (I tried both).
I have emailed tech support, I'm waiting for them to come back and tell me that the Audigy 4 cannot transmit more than two channels down the SPDIF/optical outs, thats my suspicion anyway, if that is the case then I'm not going to be a happy man and the Audigy will be going back to the store. Could be a driver problem of course as I cant believe they would implement Dolby and THX and only transmit two channels on the optical outs, that would be a bit dumb considering the primary use for digital connections is sound system interconnects.
Anyone with any ideas about this let me know, perhaps theres a hidden setting somewhere or a registry setting that switches the digital outs to carry all signals.Just before everyone kicks off, heres a response I got from a tech guy at Creative themselves.
If you connect speakers to your sound card using a digital cable
(RCA/SPDIF or optical) then the software speaker test will only output
from two speakers. The reason for this is that the speaker test signal is
not in AC3 nor DTS format.
The signal on a digital connection is either
Optical SPDIF - which is either Stereo PCM signal or AC-3/DTS Bitstream
RCA SPDIF - which is either Stereo PCM signal or AC-3/DTS Bitstream
If you play AC3 (Dolby Digital) or DTS encoded signals, the amplifier
decodes this and outputs it to all 6 speakers (5 satellites & subwoofer)
discretely.
When playing back stereo signals (such as Wav/CD Audio or MP3/WMA files)
the amplifier may generate 5. output based on the incoming stereo PCM
signal, provided Dolby Pro Logic decoding is available and activated.
Therefore the speaker test should not be relied on when using RCA or
Optical digital connections.
This applies to all speaker systems equipped with RCA or Optical digital
connections.
This makes sense to me and I'm pretty happy with it, basically as the reply says above the speaker test does not encode to AC3 hence if you hook two Audigys together and run the test you only get 2 channel output, if you play a DVD which is AC3/DTS encoded on one Audigy and listen to speakers hooked up to the other when both Audigys are connected via SPDIF or optical you should in theory get full playback on all speakers. Hopefully
Cheers
Simon -
Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
ThanksThe 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).
Maybe you are looking for
-
Do I need to turn off File Vault before I erase a hard drive?
I have a File Vault 2 password set up on my Mac, in addition to a firmware password. I'm selling the computer, and I want to make sure everything is wiped out. I know how to turn off the firmware password. However, I was wondering if I need to turn
-
OTBI reporting on BPEL human workflow tasks
Hi, Is it feasible to do OTBI reporting on BPEL tasks associated to application objects? I was searching around and could find no relevant material. Thanks, Srini
-
CATS Timesheet not appearing in ESS portal
Hi , I have set up all most everything in backend, but unable to view time sheet in ESS tab in portal. Can you take me thru the step where am i missing? Regards Joe
-
Re: Tax code does not exist for jurisdiction code
Hi Ramanjaneyulu, This is Sunil, and I am facing an error message as below - "Error in external tax system: Line: 1 - For Input String "MI0000000". How do we fix this error message ? and why such an error occurs while processing a MIRO entry with ref
-
Are Multiple Camera's supported using the iPod Camera Connector?
Hi, This question is not about which camera is supported but about the possibilities to connect multiple digital Camera's to the same iPod. Is this possible and how (if even possible) will the pictures be identifyable as coming from the different cam