I can only print one document LJ200 M276 and Dell Latitude e5430

I am using a HP Laser Jet 200 M276 All-in-One printer with my Dell latitude E5430 The problem is when I print a document the printer will work normally but if I try to print a second document it will not work at all. When I bring up the printer Queue it shows that the printer is still in the process of completing the first document (which has already been printed) and the second document is in the Queue waiting for the first to be completed. The only way to proceed with the printing is use task manager to close the application, shut down and reboot. Then again it only prints one document. I have installed the latest driver and updates and unplugged & replugged the printer and rebooted the computer.

The driver should be part of OS X, not something you download.
This link shows supported HP printers (6800 but no 6840).
http://support.apple.com/kb/HT3669#HP
I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
Barry

Similar Messages

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

Can only print one page to the Adobe PDF printer "device".

When I print to the Adobe PDF printer device I can only print one document. When I print a second document I get the message "Adobe PDF Creation cannot continue because Acrobat is not activated." However, if I reboot, I can again print a single document.
I'm running Windows 7 pro-64 bit. I have Adobe Acrobat X pro, version 10.1.7 installed AND ACTIVATED.
Any suggestions for solving this damn headache would be much appreciated. I'm sure tired of rebooting to print PDFs.
George Sundell

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

Can only print one copy

Ricoh Aficio MP C5502A
Indesign CD5
Can only print one copy at a tme. Have tried PS and PCL drivers. ANy ideas?
Thanks

Hi,
Even if you print 1-page document with a simple text Frame content?
Jarek

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

I can only scan one document at a time

I can only scan one document at a time on my scanner. Can PDF files or documents be merged together?

Your scanner software may be able to do that; not Adobe Reader.
If your scanner software cannot do that, then you'll need Acrobat or http://createpdf.acrobat.com/

Power View can only print one sheet at a time with Power BI Mobile Apps

I have PowerView for Excel 2013 on Power BI Preview. I have 2 reports sheet and 2 hidden data sheets on Excel.
I'm getting error on Mobile Application in Windows 8 RT tablet.
I should see 4 reports in preview page, but I see 2 correct reports and 2 errors.
Power View can only print one sheet at a time. Please switch to the desired sheet and try again.
Why this occurs? What should done in Excel?
Kenny_I

Thank you for reporting this issue. This is a known issue that we had fixed last week. In a few days, the updated version of the app will be available in the Windows store. At that time, your app should automatically get updated to the newest version, if
you have not changed your default settings.
If you still experience issues next week this time, please post back and perhaps share your workbook, so we can do a thorough investigation.
Thank you.

Printer only printing one document at a time....

I have a Deskjet 990cxi and it is only printing one document at a time. I've tried changing the settings in the printer menu, and no matter what I do, it still only prints one copy of the document.
I've uninstalled and reinstalled the drivers, and everything.
Just so you know:
XP Service Pack 3
HP Deskjet 990cxi
Connected by USB
and---get this---there's NO ERROR MESSAGE.
Thanks in advance for all your help.

This is caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can only print one page

Hi,
I can only print the first page of my pdf files, i have tried from other workstations (there are about 15 on a domain) and they don't have an issue and i have also tried different printers.
I get the first page ok then the second page is blank and the third page has the following:
ERROR: undefined
OFFENDING COMMAND: TKPSVK+ArialMT
OPERAND STACK:
false
I have tried uninstalling and restarting then reinstalling but i still have the same problem.
Any help would be greatly appreciated.
Pablo.

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

Since upgrading to Mavericks I can only print one page of a multipage document.

Ever since I upgraded to Mavericks my HP Deskjet 6840 color printer will only print 1 page from a multipage document at a time no matter how I set the job. And sometimes it prints the same page even thought I set the parameters for a different page. I have the latest driver. I can't find any solution on the HP site or elsewhere on the internet.

The driver should be part of OS X, not something you download.
This link shows supported HP printers (6800 but no 6840).
http://support.apple.com/kb/HT3669#HP
I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
Barry

Can only print one page at a time

Using Adobe Reader 9.4.2
Operating system Arch Linux
Printer Brother DCP-115C
When trying to print more than one page at a time in a PDF document,
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data', but only momentarily
the printer resumes 'normal' status
the printer does not print anything
It is as if there is very little data actually sent to the printer, even though the print job appears to be 254k in size
When I try to print one page at a time from a PDF document
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data' for several seconds
the printer prints the page
no problem
It seems to me that Adobe is creating a print job (for multiple pages) that the printer either does not understand, or the printer believes that there is nothing to print.
I am able to print everything that I need to, but only one page at a time!
Does anyone else experience this problem? Do you know how to overcome this?

You can use printPages(1, 5), however I need to know how you print current page.

HP PSC 2410 - can only print when document contains a color besides B & W..

Sorry, I got only crickets chirping on this over at "Tiger printing". Thought someone here might have insight w/ the user account "smoking gun" element. Background...
It has been frustrating since the update 10.4.7 "broke" my printing ease (it did, for whatever reason).
By accident, I finally discovered that if a text document from any program contains a color (if no color, B&W, it will not print --juts spits out blank pages) it will print when set to grayscale or color. So I have to convert any B & W documnt to a color and it will print (whether I set to gray scale or color --weird).
I created a new user account for a test, and it printed black text in "TextEdit" --okay, good, helps me narrow it down, right? So then I followed these instructions from another thread here:
"If a new user does not have the problem, then chances are it is a file in the user library. Reset the printing system, and go through and delete the com.apple.print... preference files and everything in the Printers folder. Reinstall the printer and see if that does it."
Tried it and it didn't work...
Weeks ago, I went through days and days w/ HP support through e-mail, as they would hand it off from one tech to another. Non officially they just sorta gave up on my case (I know I'm not the only one as my buddy has the same issue). I have installed their new driver, etc. I've been through many many steps of deleting this and that, but nothing worked. In all that time they never suggested the new user account. I was holding onto hope that 10.4.8. might help. Nope.
I'm hoping someone smarter than me will identify what I need to do next, a the above didn't help. Obviously the user account stuff is reavealing something in my account (a pref?) is not playing nice w/ the HP printer Thanks.
T i m

Didn't notice anything here on 10.4.8 intel with the latest drivers that it did not print some things, but did notice that when i print almost 100% cpu is used to do it.
Remove all stuff, Try installing latest 'drivers' again (see hp.com) and tell if it is still there.
If so: please tell what os, what mac.

Hp laserjet 5550n forgets jobs, can only print one copy of a doc at a time

We're using a Laserjet 5550n in a small office running Mac OS X 10.3.9 to 10.4.6.
We're encountering countless problems when trying to print, and I'm pretty sure I've ruled out the computer setup as the culprit (reset printing system, emptied CUPS caches, repaired permissions, used 'printer setup repair', etc ).
Whenever I try to print multiple copies of the same page it says
*Unable to store job at printer
*Insufficient disk space for this job'
However, storing jobs is switched off anyway!
Another huge problem is that the printer simply 'forgets' large printing jobs. CUPS (at http://127.0.0.1:631) says "printer processing, "Ready to print."", and then just goes back to 'idle'.
When you expect the printed pages to come out nothing happens, and the printer hasn't even started blinking.
We've had this printer for 16 months now, and the problems started just when the warranty had run out.
The 5550n has no additional memory than what it came with
DIMM Slot : 128 MB DDR
DIMM Slot 2: Empty
CARD SLOT 1: 32 MB F/W FLASH
I've tried upgrading the firmware to the latest version (20060403 07.009.0), to no avail.
Is there a more detailed log somewhere that I could try looking at to figure out what's going on? The printer web interface Event Log is useless without more detailed explanation.
The printer doesn't give any error messages (though at some point in the past it did say things like "card slot not initalized" or "49.xxxx PRINTER ERROR". I then reinitialised the memory I think ( the 49.xxx error disappeared after that).
I read somewhere about bad RAM or corrupted flash memory. Is there a way to find out if that's the cause?
Many thanks for any ideas.
Jens
iBook 1.2GHz 1GB Ram Mac OS X (10.4.6)

I did that - It doesn't list any obvious (well, to me) errors. The job that the printer 'forgot' seems to have come through OK, at least on the computer side.
I [14/Aug/2006:14:25:38 +0100] Job 1366 queued on 'hpcolor_LaserJet_5550__E790D9' by 'username'.
I [14/Aug/2006:14:25:38 +0100] Started filter /usr/libexec/cups/filter/pictwpstops (PID 2651) for job 1366.
I [14/Aug/2006:14:25:38 +0100] Started filter /Library/Printers/hp/filter/hppostprocessing (PID 2652) for job 1366.
I [14/Aug/2006:14:25:38 +0100] Started backend /usr/libexec/cups/backend/mdns (PID 2653) for job 1366.
I [14/Aug/2006:14:29:02 +0100] Adding start banner page "none" to job 1367.
I [14/Aug/2006:14:29:02 +0100] Adding end banner page "none" to job 1367.
I [14/Aug/2006:14:29:02 +0100] Job 1367 queued on 'hpcolor_LaserJet_5550__E790D9' by 'username'.
I [14/Aug/2006:14:29:02 +0100] Started filter /usr/libexec/cups/filter/pictwpstops (PID 2656) for job 1367.
I [14/Aug/2006:14:29:02 +0100] Started filter /Library/Printers/hp/filter/hppostprocessing (PID 2657) for job 1367.
I [14/Aug/2006:14:29:02 +0100] Started backend /usr/libexec/cups/backend/mdns (PID 2658) for job 1367.
E [14/Aug/2006:14:47:00 +0100] load_job: Unable to queue job for destination

Text file will only print one set of input and puts in end for name.

Okay, I have this more or less straightened out. Only thing is, it creates the text file, and will only enter one set of data. It will not print the other students information to the text file. The other thing it does is puts in the student name as end. I think that has something to do with the fact that I need to compare the student name field (SName) to end, so the program can be ended. Anyone have some ideas? I have been working on this for almost 2 weeks, and am about ready to throw the computer off a cliff..
Thanks.
import java.io.*;
import java.lang.*;
import java.text.*;
import java.util.*;
import java.text.DecimalFormat;
import java.lang.Comparable;
class my_main
     public static void main (String [] args) throws IOException
     gradebook pt= new gradebook();
     pt.compare();
class gradebook
     char LG;
     double gr1;
     double gr2;
     double gr3;
     double avg;
     String SName;
     String IDNO;
     String nameupper;
     int compareTo;
     void compare()throws IOException
     FileWriter file= new FileWriter("Grades.txt");
     BufferedWriter bw= new BufferedWriter(file);
     PrintWriter outfile= new PrintWriter(bw);
BufferedReader stdin;
stdin= new BufferedReader (new InputStreamReader (System.in));
System.out.println("Enter Student Name or End to Quit: ");
SName= stdin.readLine();
nameupper= SName.toUpperCase();
DecimalFormat fmt= new DecimalFormat ("##.##");
outfile.println ("");
outfile.println (" STUDENT GRADES ");
outfile.println ("");
outfile.println ("SName ID # GRADE 1 GRADE 2 GRADE 3 AVERAGE LETTER");
while(nameupper.compareTo("END")!=0)
if (nameupper.equalsIgnoreCase("END"))
break;
     System.out.print ("Student ID: ");
     IDNO= stdin.readLine();
     System.out.print ("Grade One: ");
     gr1= Double.parseDouble(stdin.readLine());
     System.out.print ("Grade Two: ");
     gr2= Double.parseDouble(stdin.readLine());
     System.out.print ("Grade Three: ");
     gr3=Double.parseDouble(stdin.readLine());
     System.out.println ("");
     avg=(gr1+gr2+gr3)/3.0;
     if (avg >= 90) LG = 'A';
else if (avg >=80 && avg <90) LG = 'B';
else if (avg >=70 && avg <80) LG = 'C';
else if (avg >=60 && avg <70) LG = 'D';
else LG = 'F';
System.out.println("Enter Student Name or End to Quit: ");
SName= stdin.readLine();
nameupper= SName.toUpperCase();
outfile.print (""+SName);
outfile.print (" "+IDNO);
outfile.print (" "+fmt.format(gr1));
outfile.print (" "+fmt.format(gr2));
outfile.print (" "+fmt.format(gr3));
outfile.print (" "+fmt.format(avg));
outfile.print (" "+LG);
outfile.println("");
outfile.close();


Not 100% sure this is what you're after, but it seems to work OK
import java.io.*;
import java.lang.*;
import java.text.*;
import java.util.*;
import java.text.DecimalFormat;
import java.lang.Comparable;
class my_main
public static void main (String [] args) throws IOException
    gradebook pt= new gradebook();
    pt.compare();
class gradebook
char LG;
double gr1;
double gr2;
double gr3;
double avg;
String SName;
String IDNO;
String nameupper;
int compareTo;
void compare()throws IOException
    FileWriter file= new FileWriter("Grades.txt");
    BufferedWriter bw= new BufferedWriter(file);
    PrintWriter outfile= new PrintWriter(bw);
    BufferedReader stdin;
    stdin= new BufferedReader (new InputStreamReader (System.in));
    System.out.println("Enter Student Name or End to Quit: ");
    SName= stdin.readLine();
    nameupper= SName.toUpperCase();
    DecimalFormat fmt= new DecimalFormat ("##.##");
    outfile.println ("");
    outfile.println ("STUDENT GRADES ");
    outfile.println ("");
    outfile.println ("SName ID # GRADE 1 GRADE 2 GRADE 3 AVERAGE LETTER");
    while(nameupper.compareTo("END")!=0)
      if (nameupper.equalsIgnoreCase("END"))
      break;
      System.out.print ("Student ID: ");
      IDNO= stdin.readLine();
      System.out.print ("Grade One: ");
      gr1= Double.parseDouble(stdin.readLine());
      System.out.print ("Grade Two: ");
      gr2= Double.parseDouble(stdin.readLine());
      System.out.print ("Grade Three: ");
      gr3=Double.parseDouble(stdin.readLine());
      System.out.println ("");
      avg=(gr1+gr2+gr3)/3.0;
      if (avg >= 90) LG = 'A';
      else if (avg >=80 && avg <90) LG = 'B';
      else if (avg >=70 && avg <80) LG = 'C';
      else if (avg >=60 && avg <70) LG = 'D';
      else LG = 'F';
      outfile.print (SName+" "+IDNO+" "+fmt.format(gr1)+" "+fmt.format(gr2)+
                      " "+fmt.format(gr3)+" "+fmt.format(avg)+" "+LG+"\r\n");
      System.out.println("Enter Student Name or End to Quit: ");
      SName= stdin.readLine();
      nameupper= SName.toUpperCase();
    outfile.close();
}

I can only print one document LJ200 M276 and Dell Latitude e5430

Similar Messages

Maybe you are looking for