I can open files on my wireless RAID,but can't find it to save when I create pdfs

I have an external RAID, wireless. I can see it and open the files in it. However when I open a pdf or download a photo, I cannot save it to the RAID. It is not an option. I am fairly new to Mac, so any help would be appreciated. Thanks

If the RAID is formatted as an NTFS Volume (Windows New Technology File System) Mac OS can read it, but cannot write it without third-party software.
The Hatter recommends an NTFS file extender package by Paragon Software.

Similar Messages

Can't open files on server in program but can when double click in finder

I have a Mac Pro 2.66. From withing Quark and Illustrator I have trouble opening files that are on a server Mac. They refuse to open. I can open them up by double clicking on them in the finder. This doesn't happen on the g4's and g5 on the same network.

Have you installed the 7.0.2 patch?
Bob

Can transfer files to remote Intel Mac but can't observe, control etc. Help

There are five Macs, 3 are PPC and 2 Intel.
All computers are running 10.4.8 and have vers. 3.1 of ARD
I can add them all to "all computers". I can observe-control all the PPC's, no problem with them.
The Intels (both MacMini's) will accept my login name and password, allow me to restart them, copy files to them BUT NOT allow me to observe-control them.
There is no firewall on their end except for the built-in Apple software one.
I thought I configured each of the computers identically.
I have a G5 tower.
Any ideas?
G5 Dual 2 Ghz Tower Mac OS X (10.4.8)

When you copy anything to second hard drive, the original remains on the first hard drive until you drag it to the trash and empty the trash.

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

How do you install Camera Raw 8.3 to CS5 photoshop so I can open files ?

How do you install Camera Raw 8.3 to CS5 photoshop so I can open files? Thanks

CS5 does not support ACR 8.5, it only goes as far as 6.7.
You will need to convert your raw files to DNG format with the free converter. http://helpx.adobe.com/photoshop/digital-negative.html

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files Tried to do as a backeup t

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files

I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
regards

Problem with 2 websites, can open websites and execute some functions but then it stops.

ie. www.thankyou.com.au - can get into the wedding registry listing requested but when I click on the one I want to open I get the message 'session timed out, return to home page and login again'; and
aussiefarmer.com.au - can open and login, view order options but cannot save order - saving icon appears and keeps circling.
Advised to check cookies and proxy settings - these seem to be ok.

One solution is to change the sort album titles to
Live Trax Vol. 01
Live Trax Vol. 02
Live Trax Vol. 03
For more tips see Grouping tracks into albums.
tt2

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!

Bucktr09:
I'm having the exact same problem. I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen. I can get my library content but the store is a no go. Is there any one out there with a solution?

HP8500A all-in-one can no longer scan thru wireless network but prints fine.

HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing. I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work. Setup software; original software (CD) and current download as well as "Print/Scan Dr" hangs-up at "network check" for hours. Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network. Scanner works fine with USB to Laptops.

Which model Epsons are they?
I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
(Your profile says 10.6.7 BTW).
Maybe the scanning function is not compatible with Yosemite.
You could try a few things:
reset your wifi system:
power down everything: modem, router, computer, printer/scanners.
wait a minute.
power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
Help, please.

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

I CAN SELECT A ITEM WITH TRACK PAD, But can not open the item

Mac Book 15 inch
OS X 10.10
New to Mac
Using track pad I can select an item by one click but can not open this item with 2 clicks.

Go to System Preferences>Track pad and check the Secondary Click settings

I can open iTunes and play library contents but cant see any names or information in the library or any kind of wording at all

I can open iTunes and play library contents but cant see any names or information in the library or any kind of wording at all, please help.

Your synced music (and audiobooks) will go into the iPad's Music app, and films and tv shows into the Videos app - on an iPad the iTunes app is just the store

Hi there! We just got an ipod touch 8G. We have wireless internet, but can't join the network with the ipod touch! Very frustrating and we have tried all of the troubleshooting suggestions on the support site. Help! The router is a linksys WRT120N.

Hi everyone! WE just got an ipod touch 8G. We do have wireless internet, but can't join the network with the ipod touch. Message comes up.."unable to join the network".....very frustrating! We have tried all trouble-shooting suggestions on the site, but nothing is working. Anyone out there got any ideas for us?? The router is a Linksys WRT120N.
Thanks for any help any one can give!!!

Does the iPod connect to other neworks?
Do other devices connect to the network?
What encryption are you using?
How you tried changing the type of encruption? Changing to no encryption?

I can open files on my wireless RAID,but can't find it to save when I create pdfs

Similar Messages

Maybe you are looking for