I can open my all folder and get error
Hello
whenever I opened my any Folder (on desktop, In C D F driver) then got that message please give me solution Error is below...
this file does not have a program associated with if for performing this action. please install a program, or if one is already installed , create an assoction in the Default program control peanel.
Hello Ved1987,
What is your current situation?
Have you tried the solution as MVP S.Sengupta mentioned?
Have you made any change before this issue?
Please try to restore the defaults for Folder Option and check if the issue still exists.
Open Windows Explorer -> click Organize on tool bar-> Folder and search options -> On General and View Tab, click Restore Defaults.
Additionally, we could try to use the fix tool to diagnose and repair Windows File and Folder Problems automatically
http://support2.microsoft.com/mats/windows_file_and_folder_diag
For more information, please take a look at the following question similar to this issue.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/cannot-open-folders-or-drives-this-file-does-not/0b556956-a35c-e011-8dfc-68b599b31bf5?page=1
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Similar Messages
-
Can't login with gdm and get error message
Hey, I had an arch install up and running last night. I was tinkering with gnome themes, and installed a bunch and eventually tried to mess with the login screen. I installed something, I think like gnome-settings-manager or something like that, and it basically never worked. I tried to change the login BG and some stuff, but couldn't do it, the program would freeze.
About an hour later, I realized chrome wouldn't run, and I had to use the default browser. I restarted and then when I logged back in, I have a black login screen with an error that says "Install Problem: the configuration defaults for gnome power manager have not been installed correctly please contact your computer administrator."
When I try to login, it starts like it's going to work, but then brings me back to the same screen.
So basically I can't login at the moment, I tried pacman -Runs gnome gdm gnome-setting-manager gamin gksu
and then pacman -S gnome gdm gksu gamin
but that still gives me the same screen.
Any ideas where to go from here?
Edit: Decided to install KDE as a workaround, I'll see where that gets me, opening a new thread as my root partition is now full... and IDK how to fix that atm
Last edited by B-80 (2011-01-10 23:31:10)Just my 2 cents, seeing that nobody is replying...
You could try to create another user and see if it works well, just to understand if it's a problem in the user configuration files, or in the system configuration.
If the new user works well you could try to import your config files from your /home/user/ folder one by one and see which one messes up everything.
If the new user has the same problems, it's a more serious problem, maybe you could try to remove packages one by one (pacman -Rscn package), starting from the last one you installed (you can list packages by installation date using yaourt -Qe --date) until it works again (taking care of not removing essential packages). -
How can i open the directory/folder and read all the files inside it in order and then close it?
How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
thanksIn the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions -
Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."
There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers -
I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
Is possible search all the files in one folder and get list all with the same extension.??
Hi,
I would like to get, if it is possible, do searching in one determinate folder and get all the files with the same extension, For example, Give the *.pou and get all the files on one list of the files in this folder and sub-folders...
If it is possible i would like to see any example.
Thanks a lot, Fonsi.Hi Dennis,
I got your advise, I download the openG (i had problems, and downloading directly and install one to one).
Ok, i got but i have one problem, which i can't solve. I entry the promt to search and put the directory to save, later i push 'Do it' and it search the files, show the paths and number, then save in the folder and finally show the window , all ok!.
The problem is with the target path, when i want use the browse, it doesnt run properly. I want select one carpet, and it demands one file, i dont understand why??, i changed the options browse but it didnt work. Also i would like when i put one path if folder doesnt exist, directly create it and save the files, if exist copy it.
Thanks for all!. I attached the file in lv 7.1
Attachments:
buscar3.vi 50 KB
capture.GIF 48 KB -
Why can't I open a playlist folder and drag and drop playlists in it?
I have hundreds of playlists that I am trying to organize via playlist folders. Right now I have to select a single playlist and drag it all the way to the top to the selected playlist folder. That is very tedious and time consuming! I have tried to open the playlist folder and just drag and drop the playlist but no go on that. Is there a way to move multiple playlists at the same time to the same playlist folder?
Sorry, I misunderstood your question.
I found no way to drag multiple playlists unless I collect them into a folder first and then drag that folder all the distance.
But you could try to shorten the way you have to drag the playlist, by collapsing all folders but the one you are working on.
I keep one big folder, that usually hold all my playlist and playlist folders.
When I want to rearrange certain folders I move them from this container and close the folder containing all the rest. Then I can move the from one folder to the other without too much scrolling. -
I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.
Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again. -
How can I remove all photos and directories from iPhoto?
How can I remove all photos and directories from iPhoto as if it was a brand new install?
I am new to iPhoto and was unaware of how it works, honestly I still am a little confused as to when pics I am using 1/2 the time, some from iPhoto and some from MyPics.
Anyhow, I am looking to remove all photos from iPhoto because during the migration of all my photos from PC to MAC, somehow my timeline became messed up and all my photos that have been logged my dates since 1998 are now all messed up.
Although all my year folders are still in tact, IE 1998-2006, the subfolders and like pics are all intertwined somehow.
And when I search iPhoto for a given year, photos from 2,4, 8 yrs back show up in 2006.
Anyhow, I have selected and deleted all photos and folders within iPhoto, and then import the desired photos from MyPics, only to have the photos double up in the library. ( The old ones that should be deleted and the new imports)
I simply don't get it, they fill the trash and disappear when it's emptied, then reappear when iPhoto re-opens!
Can someone help????
I have completely reworked all my photos so that they are all in the correct folders outside of iPhoto, and now I want to import those and only those pics with that file structure.
IE Structure = YEAR > MONTH > DAY ( or if needed) > DAY/EVENTDo you want to remove the existing full sized image files also? If so then just drag the iPhoto Library folder from the Pictures folder to the Trash and empty it. But be warned you'll lose all of your image files.
You are dragging the files to the iPhoto Trash bin and then using the iPhoto->Empty Trash menu, right?
In copying your photos to myspace and then back the original capture date may not be retained and then either the created date or modified date will be used by iPhoto. If the files in the current library are the originals from your camera then those have the best chance of retaining the correct Captured Date. You can check that out by dragging the Originals folder from your iPhoto Library folder to the desktop and then trash what remains of the iPhoto Library folder. Then launch iPhoto and it will ask you to create an new library. Then import that Originals folder and it's subfolders by dragging it into iPhoto's open window. You'll keep the same rolls that was. The roll dates may change but you can check the captured date of the files by using the calendar in the Source pane.
You won't be able to keep your folder structure within iPhoto. Each outside folder will result in a roll with the same title as the folder. You'll be able to create folders in the Source pane to put albums inside. You can create a smart album to include all photos in a certain date range, line one month.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.7) 22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200 -
Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help. -
My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?
Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x -
Can you make a folder and it's contents temporarily "invisible"---sort of?
Can I make a folder and it's contents, temporarily invisible? I don't mean I don't want to see it. I mean I want to make it such that if an automated process was scanning my computer, it temporarily wouldn't see that folder and it's contents.
For instance, let's say I have a folder on an external firewire drive containing video files. And I'm going to run a batch process or automation that says: "Look at everything on that external drive and move it to another designated location"...but I don't want it to move one folder. And I have several folders on the external drive and I need to keep making some of the folders "visible" to the process or "invisible".
I know I can physically move the individual folders to another location temporarily, run the process, and then copy them back...but I'm trying to determine if there is anything built into OSX 10.6 that
lets you identify a folder and temporarily make it and it's contents "invisible" in the sense that I described above.
To be clear, I don't need the folder to actually disappear...I just need it to be "jumped over" or ignored by any batch processes that would be scanning the external drive, and after I run the process, I want to make it "visible" again.
Thanks in advance for any input.brvideo wrote:
One question about this....I notice that there are three READ/WRITE options:
One for my particular user name, one for STAFF and one for EVERYONE.
Do I need to change all three, or just EVERYONE to WRITE.
You normally wouldn't want to change the rights to your name in a situation like this. What you'd want is to have the other app logon to your computer with a different username, (you have to create the additional user in System Preferences,) then change the privileges for that username. This would eliminate the need for you to have to change the settings all the time.
In addition, if you make a mistake, you could prevent any access by your username, which means you'd have to logon as some other administrative user in order to fix your username's privileges. This is why I said I wouldn't recommend this as a first choice.
And are there any keyboard shortcuts for this?
No, but I imagine you could create an Applescript to do this. But as I said above, if you have the process use a different username, then set the appropriate privileges for that username, you wouldn't need to change the rights all the time. Just set them once the first time. -
I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer
If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/ -
I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?
Maybe you are looking for
-
Get the following message from itunes when i try to open it: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now? I then press yes and the macs look for new updates a
-
Question After I close Firefox and then return to open it my computer says that it is still running and needs to be closed or the system restarted. How do I resolve this? edit
-
How to track clients idle time and force to Login View
How can I force clients to the Login View after a period of idle time ( 1 hour). My mobile application consist of many views and need the time out to work from any view. Your assistance is appreciated.Using Flash Builder 4.5 and AS 3.0. I was able t
-
Is DPS the right solution for me?
I am currently working on a project that includes an iPad app that will direct users to one of 30 brochures. Other developers are working on the iPad app, I am creating the brochures. If i use the DPS to publish the brochures, do I need to create 30
-
U2 20G is getting a weird error
It has been acting up today so I brought it home to "restore." It is now telling me after i hit the "restore" key that "There was a problem downloading iPod software to the iPod. The requested resource was not found." Click on OK and nothing happens.