I can open my catalogue and see edited photos but cannot locate

To start off thanks for the help. I have searched but cannot find an answer to my question, I feel I am doomed. I am able to open my catalogue, see my edited thumbnails of photos, but I get the message they are unable to locate. I have performed all steps to find them but I can't. On top of it I KNOW I deleted the place where they were saved because it was in an out of order folder and I was cleaning up my HD. Also I did not back up(mistake I know I'm learning).  I have all the original files still, but I guess my question is why can I see the catalogue with all my edits, but can't seem to locate the file, I feel they have to be there somewhere. Is it possible to see these things and still be doomed? Or in fact are they still somewhere to be found? Thanks.

Jlinkrn wrote:
So just to finalize and be clear. I start of with a RAW .NEF file. Start a catalogue with the .NEF files. Then as I edit them they were saved to a destination elsewhere that I have since deleted as . DNG files. I still have all original photos, can see the edited thumbnails which makes sense based on what other have said, but all the time I put into editing through Lightroom is out the window because I deleted the destination files?
If you edited the NEF files, you don't need the DNGs, but you do need the NEF files. Do you still have those?
If you told Lightroom to convert to DNG before editing, then you need the converted DNG files of your original NEFs, not the ones you "saved" (technically there is no "save" command in Lightroom so you couldn't save the files as DNG, and anyway if you mean "exported" then it shouldn't matter if you deleted the exported photos). Do you still have those DNGs that were converted from your original NEF files??
So, if you deleted the exported photos, you haven't lost your editing.
If you have deleted your NEF originals (in the case where you edited the NEF files), or the DNGs converted from your original NEF files and the original NEFs are deleted too (in the case where you edited the DNG files) then your editing is probably intact in the catalog but can't be used as you don't have the original files.

Similar Messages

  • I am in my icloud, I can track my phone and see my Contacts, but there's no mail. Why can't I see my stored emails?

    I am in my icloud; I can track my phone and see my Contacts, but there's no emails. What am I doing wrong?

    Not sure we're speaking the same language (my fault), but let me try again:  I launched Firefox, logged into icloud.com and gone to the mail page to find no emails there.  We have a home wifi network, and our iPad and iPhone are synched with our home email on the home computer. In the iPad settings under iCloud I turned the email slider to "ON", and it uploaded the calendar and contacts to the iCloud, but not the email.
    And to answer your question above - I can't tell if we've moved the incoming emails to a local folder. Perhaps that happened when the email was set up (a long time ago). I just assumed that if it appears on the iPad, then it should appear on the iCloud.
    The iPhone settings would not let me slide the email slider to "ON": does that block the emails somehow?
    Thanks for any help or thoughts -

  • I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

    I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

    Hello,
    Please refer to following article:
    http://windows.microsoft.com/en-us/windows7/pin-a-program-to-the-taskbar
    Regards,
    Anoop

  • I have facetime 1.0 and I have  a constant mute mic icon.. set internal mic preference. Makes no difference, I have iMac21  --I can hear the contact and see her.. but I am mute

    Can't unslash my microphone mute icon.. can hear and see the contact.. but she can't hear me, because I can't UNMUTE THE microphone.
    I went to preferences and clicked internal mic.. made no difference.
    Does this have something to do with her version of FACETIME vs. mine?

    Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
    Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
    There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
    Sent from Cisco Technical Support iPhone App

  • I can see my photos but cannot move them anywhere or do anything with them

    I transferred photos as I have always done from my digital camera to Iphoto. After transferring the photos I deleted them from my camera. I can see the photos in Iphoto but I cannot move them anywhere, I cannot download them e.g. to send with an email, I cannot change them in any way, I cannot delete them.
    I thought I had done something wrong so I shot two more photos and put them onto my laptop exactly as before. These photos are fine and can be moved around as always. What now???

    Hi again
    That was a great help. Thank you so much. I could open "Show original file" on approx. half of the photos (there were 49 in all). I have been able to save those to my desktop. They were not copied and are now no longer in the original file.
    But it gets even stranger. When I right click on the others (20 in all) "Show original file" is not active and when I click on show file they are not in there. These I can not move in any folder whether "all photos" or events so are still lost to me at the moment. All the photos were taken from my camera at the same time. Do you have any more wonderful ideas?... Glinda11

  • HT5653 the import photo button does not work!  so I see the photos but cannot import them?  Need help

    after connecting i5 to MAC my photos will show but cannot push import button to initiate.. This is first time it does that.  Need help to transfer and save my photos from my iphone

    Can you do it with Image Capture (in your Applications Folder)

  • I can open the program and see it's running, but the window is invisible or too small to see.

    I've tried scanning the help forums and was told that it's probably a corrupted file that saves my preferences upon closing, but all in the info I can find about this is for earlier releases.
    I've tried clearing caches, opening images that might force the window larger, uninstalling and reinstalling, and restarting my computer. Suggestions?

    You can use Save & Quit with one of these Startup settings:
    * Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" or "Show a blank page"
    Save and Quit will only work if you close Firefox via "File > Quit" to close all open Firefox windows.<br />
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
    You can reset the warn prefs on the about:config page via the right-click context menu.
    * browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
    * browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
    * browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
    See http://kb.mozillazine.org/about%3Aconfig

  • TS3276 email was hacked, can open email on yahoo (after changing passwords) but cannot open mail on my computer, cannot even access mail because it will not accept my user name or password and I am unable to reset my account

    email was hijacked and spam/virus link sent out to all of my contacts on wed at 4:21AM..... with the Subject as Rep: My Name or My email address and a link to a web page discussing making money working at home.  Could not get into any of my mail, on the web or on Mail on my mac.  After a phone call to automated support through Yahoo through ATT, I was given a temporary password and was able to reset my Yahoo password and get email on the internet.  I still cannot open my Mail Account on either my iMac or MacBook Pro.  I cannot get into Mail, period.  My sign in keeps popping up and it keeps telling me that my user name or password is incorrect.  I tried my old password, the temporary password and the new password.  Nothing is working,  I cannot receive or send anything in Mail.  Mail is Frozen.  If I want my email, I must go to the web and sign into Yahoo Mail.
    Help!

    When you were entering your new password in mac mail for your Yahoo account, you didn't perchance change the user name from [email protected] to just name without the @att.net? I only ask because I've done that, and att.yahoo mail requires a fully qualified [email protected] for access.
    In mail, you might click on window on the menu bar, then connection doctor. On the account with the red dot next to it, it will tell you why it can't connect, and if you click on it, you'll be taken to where you can fix it. 

  • Using 8.0.1, Hotmail, Can open my account and view the emails but can't open an email or delete one. Can in IE

    Have recently upgraded the hotmail, but it has worked for ~2 weeks without problem. Also recently updated an Epson Stylus NX400 scanner driver for XP, but I think this problem was there just before. Recently installed Chrome and Safari (Safari is supposed to be better than most at delivering error messages, but I didn't receive any help from that). IE seems to work with Hotmail as expected.Chrome is slow and seems to require double-clicks where a single is expected, but it displays the email content. Safari also works as expected.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Unable to delete files from my startup disk; can move to trash and delete them there, but cannot delete from startup disk?

    I constantly get a warning message that my startup disk is full and I need to remove/back up files from it.  I have already backed up the files from my "All Documents" folder, which is on the left side of the menu in my startup disk.  The problem is, I cannot delete those same files from the "All Documents" folder on my startup disk.  It will let me move them to the trash, which I can empty, but they still do not delete from the "All Documents" folder.  Does anyone know why?

    Drag the files you want to delete (this applies to applications too) from their current location to the Trashcan icon in the dock. The trash will appear full. Hold down the control key and click on the Trashcan and select "Empty Trash" from the pop-up menu.
    Alternatives to the control-click method: double-click on the Trashcan and click the "Empty" button in the upper right corner of the window that comes up; right-click on the Trashcan (only works if you have right-click enabled); press shift-command-delete; select "Emtpy trash..." from the Finder menu.

  • Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

  • Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    BrightBluephotograph wrote:
    I cannot install lightroom 5 until the upgrades from 4 are on the pc,
    You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5.  Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

  • I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    See if exporting them helps:
    Exporting From iPhoto | Apple Support Communities
    Gene

  • I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes

    I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!

    Bucktr09:
    I'm having the exact same problem.  I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen.  I can get my library content but the store is a no go.  Is there any one out there with a solution?

  • How can i check messages sent to device through my Verizon account online? i want to open the messages and see the contents.

    How can i check messages sent to device through my Verizon account online? i want to open the messages and see the contents.

        I know it's beneficial to be able to check your message content ArmyQueer. Verizon messages offers a wide variety of convenient options to manage messaging. What make and model device is this? When did you download the application on it? Please be aware you will only be able to see content after the app had been downloaded and installed. Content prior to the app being active will not be available. Here's a link with additional info. http://vz.to/1k3gBxd
    JonathanK_VZW
    VZWSupport
    Follow Us on Twitter@VZWSupport

Maybe you are looking for

  • Report exection problem for one user - not able to see the data.

    Hello Friends , Need some help . I have got the one ticket from bussniess side about the report execution . Unfortunately , I am also not having authorisation of that report due to sensible data. Problem - User is executing the report but some how he

  • Version history - 7.0.59.102

    I'm currently using Skype version 7.0.59.100 and getting update messages to upgrade and see that the latest version is 7.0.59.102. What are the updates / bug fixes in the latest update? I've been looking for a revision log in support forums and commu

  • Limit rows for Degenerate dimension in SSAS 2012 Standard Edition

    Hi Experts, I have a fact table consisting of 4 measures and 6 descriptive fields. The Geography and Time dimension are separately palaced. I want to build SSAS cube on this schema. I have created the dimension from fact table itself for the descript

  • Would like to share a widget with my friend, but where are they?

    Hello, My friend came over the other day and liked one of my widgets, but I can't recall the exact name of it so I can't tell him what to look up. So I thought why couldn't I just send him the file, but I don't know where Snow Leopard stores its widg

  • Unable to restore my files with Hp Recovery Manager

    HP Pavilion G6, operation system Windows 7, we got a malicious software and after we were unable to start the windows, I decided to do a factory restore but before that, I did backup my files from start-up menu with HP Recovery Manager. After the bac