I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

On a Mac how to set Officejet Pro 8600 for black ink only printing

How do I set up the Officejet Pro 8600 to print in black ink only (working from a Mac)? The printer was already installed and is functioning.

In the Print dialog box is a Black & White option.
You can also select Black & White printing from the Presets drop-down:
Hope this helps.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How do I print a configuration page from a Mac with Snowleopard?

How do I print a configuration page from a Mac with Snowleopard? Printer is workinhg fine, but I just put in a new cartridge and I'd like to know how many pages I'm printing.
Dave

Hi there Dave, aka @dewanio , welcome back
I saw that you are looking to print off a configuration page.
The printer itself will print a test page however, the model depends on how it will print. Let me know which printer you have and I will get back to you!
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
OS: Windows 8.1 64 bit
I noticed the problem: After I scanned a medical card that was 80% cyan.
Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
Only occurs during color scanning or copying. I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
If I had scanned the small O'Riley's note in black & white there would have been no streaking.
I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
I sincerely appreciate your assistance.
Rene'

Hi @Veritasabt,
I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
Try scanning again to see if you have the same results.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't setup ePrint and Web Services on my New HP Officejet Pro 8600!

I just purchased a new HP Officejet Pro 8600. I setup the printer following the setup wizard: my home wireless network work perfectly and the printer prints great. I am now trying to setup ePrint but I get the following error:
"Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer. If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings."
I don't use any server proxy and my OS System is Windows 7 64 bit.
Someone can help me?

I just went through this a few days ago. I had changed internet service providers and thus had a new router. My hpconnected migrated from hpeprint andkept saying it was not connected to the network and hpconnected status kept saying 'offline'
This totally worked:
on hpconnected.com remove your device
on your printer or from hp printer software on your system 'remove web services'
readd webservices, your printer will print the new information with the claim code
add your device back to hpconnected with the new claim code
and wah lah....you are connected to your network through webservices
you will need to create a new hpeprint email as a result
PS on the set up when it asks for Proxy Settings and you have ATT Uverse these do not exist so just leave the areas blank

HP OfficeJet Pro 8600 All-In-One Inkjet Printer

Hello, I have an HP OfficeJet Pro 8600 All-In-One Inkjet Printer. It started out working fine, but the touchscreen got lighter and lighter and would finally go out. Now, I cannot see the screen at all and therefore am unable to use the printer. I tried to delete the printer from my computer and reload the driver, but the driver requires that I use the touchscreen to initiate installation of the wireless capabilities and so forth. Without being able to have the touchscreen light up, I am unable to see and follow the directions to hook it back up to the computer. Any ideas? Does HP make a replacement touchscreen for this product? I bought this one because I have another one that works perfectly at home and was hoping to use this one at work. Thanks in advance for any help anyone can give.
Wayne3

Hello there! Welcome to the forums @Wayne3
I saw your post about how the display screen on your Officejet 8600 has gotten lighter and lighter until the display was unreadable. I have a few ideas in mind that might help you.
Update the firmware on the printer with a USB cable plugged into the printer, and computer.
Click here to download the firmware update: HP Officejet Pro 8600 N911a Firmware
Try a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
I hope the steps help you! If the screen continues to have the same problem, give us a call to see what your printer options are:
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a terrific Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

I have spent hours figuring out how to print a t-shirt transfer since my new HP printer doesn't seem to allow for mirror image printing (yet my old HP printer easily let me select this feature). Here's what worked for me, using Word 2010:
Create the text and insert any images into the document as you normally would.
Go to Insert / WordArt and chose a style of lettering (I don’t think it matters what you choose since you will be cutting and pasting the data from 1 above). A text box will appear and a new "double-decker" tab will appear at the right (Drawing Tools on top and Format below).
Copy what you created in step 1 and paste it into the text box.
Click on the Format tab (the cursor must be inside the text box for the Format tab to be visible).
Choose Text Effects / 3-D Options and then 3-D Rotation Options. A dialogue box will open. For the X value, enter 180. Do not enter anything for the other values. Your image should have rotated to mirror image.
Click Close and save your document.
You should now be able to print your document as usual.
Good luck!

HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

Hi!
So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer -- and apparently from the computer entirely because it eludes searches as well. So multiple times (like, 20 times) I have removed and reinstalled the printer on this computer because sometimes -- not every time, infuriatingly -- immediately after installing the printer from the online driver, the Printer Assistant opens -- but there doesn't appear to be a way create a desktop shortcut for it. As soon as I close it, it's gone forever, and it's just not practical to have the Printer Assistant open all the time. The next time I want to scan something wirelessly, I have to go through the process again. It's driving me insane.
Is there any way to download just the HP printer assistant software, or some sneaky way to create a shortcut for it? It's the only efficient way for me to interact with the printer for scanning (the bulk of the printer's usefulness) at my home office, and if I cannot get it to work consistently, this will be the last HP product I buy.
Thanks in advance!

Hi,
Follow the steps below to repair the software installation when cliking the HP Officejet Pro 8600 will not launch the HP Printer Assistant software, these steps should resolve a such:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03659948&lc=en&jumpid=reg_r1002_us...
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router. It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64.
Any help is appreciated!
This question was solved.
View Solution.

Hello NRHII,
Welcome to the HP Forums!
I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
Touch the Setup icon ( ).
Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
Touch the name of your network, and then touch OK .
If prompted, enter the network password, and then touch OK . The printer connects to the network.
Also, as I was typing this post TreeFrog posted some great information to follow.
Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

HP Officejet Pro 8600 Plus Where is the print preview???

I just purchased HP Officejet Pro 8600 Plus all in one printer. Where is the print preview option. It's no longer on "preference" or anywhere else.

Since HP isn't answering me on the 'Print Preview' being available soon or which HP printers software actally HAVE the 'print preview' function enabled... I did some searching and I found a partial answer to the 'print preview' delema. The web site http://www.obviousidea.com/windows-software/greencloud-printer/
has a free program called GreenCloudPrinter which, in a nut shell, will install a printer called GreenCloud which set itself up as the default printer and any file that is sent to the printer gets directed to the GreenCloud device which will then bring up a 'print preview' screen with options to remove blank pages and or print or not print the preview! And a lot of other functions too. Works great and it's free. You do have to register it and a registration code is emailed to you to unlock the program. I hope that helps you out... worked for me.

Problems with lcd screen HP Officejet Pro 8600 e-All-in-One Printer - N911a

The backlighting on my lcd screen has all but gone out. Product HP Officejet Pro 8600 e-all-in-one printer - N911a

Hi greenbeaner, I see that you're having problems with your printer's display. I would take a look at the document below. Officejet Pro 8600 Let me know how it goes.

To check ink levels I am told to print self test. page from cpu or printer.

There is no way to print a test page on my" psc 2410 all in one" connected to a HP cpu with Win 7, 64 bit. Is there a workaround/

The page here shows how to print a self-test report from the front panel, but it does not appear to have ink level information. I have not used a PSC 2410 for years, but the following may give you what you need: press the # and * buttons together on the printer. The screen will say "Enter special key combination". Press 1 2 3. This should bring up a service menu. Use the right arrow button repeatedly to bring up a "Special Reports" screen, OK, then right arrow to select "Cartridges" or some similar, then press OK. A page will print with ink level information shown about the middle of the page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack. Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF. (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
If we can't use the ADF for check printing, then how can we get the checks to print in the correct order. Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1. Otherwise they have to count out the exact number of checks & place them in the tray. Or reverse all of them which is not an efficient either! I hope this makes sense.

Hi @kceacct ,
I see that you would like to know how to print out the checks in order. I will do my best to help you.
The ADF can be used for copying, scanning and faxing.
From the print driver you can only select the tray that you want to print from.
Changing Print Settings in Windows 8.
You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer. Any suggestions?

After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer.   Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network.   Talk nice to it.

Hp Officejet Pro 8600 Premium - wireless home network printing from multiple devices

We have a wireless home network with several desk tops, lap tops and tablets using the network for internet access. There is only one printer in the home, our hp Officejet pro 8600 Premium. Right now everyone who has access to the network can print. We want to prevent printing from specific devices while allowing printing from others. How do I password protect the printer so that only certain devices may print? Or alternatively, remotely prevent devices from printing?

Well this is a little tricky. You have a 'home' network so we assume you want everyone to print went they want. If you are talking about 'guest' that come over and use the printer, the best thing is to get a router with a Guest Network which isolates your home network.
That being said there is no 'password' you can put on the printer , however you can add security.
Start/Devices and Printers/ Right click on your printer and select Printer Properties , select the Security Tab. Now you can set security.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Similar Messages

Maybe you are looking for