I can read my temperature and batch number but I can't produce a graph show the Temperature over time

I am very new to Lookout and I have been having alot of problems getting the graph to show up. We have several kettles that cook media to a desired temp over a pre-set time and I am able to see the batch number and the temp of the kettle but I can't bring up the graph that shows the recipe being cooked. We use Ethernet for three of our larger kettles and RJ-422 for ten of our smaller kettles. My network constantly crashes and if there is anyone reading this in the Ottawa area I would like to set up a meeting to get some advice.
THKS. Jason

Hi!
As i understand, to create Graph in lookout is easy and you know the process . There are Two resons to Graph hang the PC or process.
1.Low computer memory
a. RAM b. Graphic Card memory.(VGA Card)
2. Deviation Rate.
If you set the deviation rate minimum than it will continuously logs the data and will slowdown you computer. If your process allows you to store data with more deviation than it will make your life easir.
Also increase the Computer RAM and increase the Graphic card memory, because graphs require memory as in the case of games.
Hope this will solve your problem.
Atif
Bahrain

Similar Messages

Link between storage location and batch number to retrive the salk3 field

HI,
In my report i need to give the output as follows
For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
note: My report output should look like the fields lgort batch and unrestriced value of stock in tcode mb52.
subhashini.
Edited by: subhashinikb on Apr 1, 2011 9:38 PM

Hi,
In 2 steps, u can get the unrestricted stock value.
step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS).

I have PS CS3 Extended discs and serial number but do not have a CD drive on my new computer. How can I download it?

I have PS CS3 Extended discs and serial number but do not have a CD drive on my new computer. How can I download it?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Production Order Number and Batch Number same during order creation

Hi All,
I wanted to keep the Production Order number and Batch Number same during creation.
How I can do that during creation of order only. So during creation same number to be get assigned automatically in the background.
One thing I can maintain ; the same number range for both.
But how to activate other functionality.
Regards,
Amit

Hi SAP2511,
For Production order-
1.You can define a Order type and Mantain the number range same as batch number range (in OPJH transction)
For Batch
1.Activate Automatic internal batch assignment - (OMCZ)
2.Number range for batch - for object - BATCH_CLT - (OMAD)
For batch creation at time of Order creation -
You can create Automatic batch at the time of order creation or order release
1 Create Production scheduler Profile(OPKP) and assign in Work scheduling view of material master for which you want to create batch at the time of order creation or release.(Select automatic batch creation at the time of release or creation in OPKP)
Things to be taken care -
1 . What if you set deleation flag for order?
Regards
Girish
Edited by: girish khobare on Aug 20, 2010 9:31 AM

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

Link between Bin Location and Batch Number

Hello.
I'm having some issues to find an link between the Bin Location and Batch Number.
I've searched through OBIN, OIBT, OBTN, OWTS, but no clue of what makes the link between this guys.
Does anyone here know something about that?
Best Regards.

Hi Araujo
Check this out > SAP Business One 9 - List Of New Tables posted by Posted by Kennedy T in Reporting and Printing it might help.
Des

I downloaded an album from iTunes on my iPad and then i synced it with iTunes it doesn't show the individual songs in my library just the album which opens another window. Can you help?

I downloaded an album from iTunes on my iPad and then i synced it with iTunes it doesn't show the individual songs in my library just the album which opens another window. One of the albums won't even play the music. Will only open the "booklet" for the cd but not the music. Can you help?

Hello dannugget
Normally, if the songs showed that it is purchased then it is probably already in your library. If not check out the article below to walk you through downloading your past purchases. You may also want to check to see if you have Automatic Downloads turned on so that way next time you can get your tracks without having to plug in and sync.
Download past purchases
http://support.apple.com/kb/ht2519
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Regards,
-Norm G.

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

YOU can't fix it. But you can bring it in to Apple for an out of warranty replacement for $199.

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

I purchased I movie on Feb.15th 2014, and now when I go to update it, it's showing the apple i.d. of the previous owner of this laptop from two years ago. I can't update it on my computer? Help?

I purchased I movie on Feb.15th 2014, and now when I go to update it, it's showing the apple i.d. of the previous owner of this laptop from two years ago. I can't update it on my computer? Help?

If the tech didn't erase the Mac as I stated above, he hasn't properly prepared your Mac for a second hand owner. Nothing less that erasing the HDD and returning the Mac to the shipping version of OS X so you may set up the Mac as a new Mac will suffice. All Macs since the introduction of OS X lion have shipped with iLife apps from the Mac App Store installed for free. Prior to Lion, they shipped with the boxed version of the apps.

I was watching a movie on itunes and i exited, but started to rewatch later. when i tried, the movie was reset to the beginning and wouldnt let me skip to where i was before. can anyone help me?

i was watching a movie on itunes and i exited, but started to rewatch later. when i tried, the movie was reset to the beginning and wouldnt let me skip to where i was before. can anyone help me?

yes yes and yes. but now the movie has completely disappered from my iTunes and from my iPhone. I had 16 days and 19 hours left to watch my movie when I started it, and after I started it I still had 23 hours to complete it. Now it is completely gone.

My CS4 crashed and I cannot find the cd to reinstall it. I have the box and serial number but no cd.

My CS4 crashed and I cannot find the cd to reinstall it. I have the box and serial number but no cd.

Hello, you can also use the links on ProDesignTools
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

How can I produce a report of the people asked to complete a form and their response?

How can I produce a report of the people asked to complete a form and their response?

Thanks. I cover four different sites. We are using the same questions for the four sites. Each site has a different client base (with different users). So I am inviting persons to complete the form in an ad-hoc basis following training sessions (so far I have trained 10 out of 57). The responses will be viewed by two or three Managers. The problem is that it is difficult to see who has started filling out the form, who has not even looked at it, and those who have completed it. So for example at the moment I have a zero response to my requests to complete the form, although some people may be working on the form?
Russell W H Bulley C.Eng B.Eng MIET
Critical Engineering Manager
MITIE – Delivering FM for Lloyds Banking Group
5 Limeharbour Court, Limeharbour, London, E14 9RH
M: 07900704196
www.MITIE.com<http://www.mitie.com/>
Follow us:
Description: Description: Description: Description: Description: Description: Description: twitter_32<http://twitter.com/mitie_group_plc>[Description: Description: Description: Description: Description: Description: Description: facebook_32]<http://www.facebook.com/mitiepeople> Description: Description: Description: Description: Description: Description: Description: linkedin_32 <http://www.linkedin.com/company/mitie?trk=fc_badge> Description: Description: Description: Description: Description: Description: Description: youtube_32 <http://www.youtube.com/user/MITIEGroupPLC> Description: Description: Description: Description: Description: Description: Description: rss_32 <http://www.mitie.com/rss> Description: Description: Description: Description: Description: Description: Description: flickr_32 <http://www.flickr.com/mitie_group_plc

I can read my temperature and batch number but I can't produce a graph show the Temperature over time

Similar Messages

Maybe you are looking for