I can restore but  not sync! please please please help!

please please help...i restored my original iphone (2.0.1) after i restored...it doesn't give me the option to sync...it brings me back to the restore screen! I didn't know what to do so i hit restore again (another 3 hours!) how do i sync???
please please anyone help! i'm leaving on vacation tonight and totally need my iphone synced!

bump anyone?

Similar Messages

  • Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

    Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

    well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
    http://support.apple.com/kb/HT1351 for syncing music

  • When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
    try to using iTunes via remotedesktop? try without.

  • Songs in Ipod but not in itunes library. no option to back up so i can restore. Will someone please help me?

    Ok, see, i was dowloading some songs off of http://www.youtube-mp3.org. I dragged the songs into my itunes library, but when i looked, they weren't in there. so i looked at my ipod and the songs i downloaded were on it! i dont know how either! i tried to back up my downloaded songs so i could restore it to see if that would help, but there wasn't an option for me to back up my ipod when i right clicked on it. i looked atsome of the other forums about the "AppData" solution. it said to delete the corrupted file if there was one, but i dont know what to look for. can someone please help me? this is driving me crazy.

    See this older post from another forum member Zevoneer covering the different ways and software available to help you with this task.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

  • For some reason, my itunes both is inable to unstall the new update, and since this has been happening my iphone 4 wont be recognised either (recogised by windows but not itunes) please help!!

    Well its all prety much in the heading, itunes is unabe to update and iphone 4 wont be recognised, but it cmes up in 'computer'? please help, i have tried some things off the apple support page and googe search but hasnt helped. andi have loads of new beats ready to put on!

    yer i do, its say 'errors occured while downloading the updates. If the problem persists, choose tools> Download only and try installing manually.
    i have tried installing he files as it says above but then it doesnt work and says this:
    the installer encountered errors before configuration. your system has not been modified. to retry these operations at a later time , please run the installer again.
    i have tried both methods countless times with no success?

  • I'm buy gems in clash of clans 39hours ago but not recive please help me fast

    I'm buy gems 39 hours ago in clash of clans but still not recive my gems and I don't know what I do I send mail for clash of clans many times but he didn't answer me and I send mail for Apple store but also not answer me please help me

    Since this is a problem with the app, the app developer is the best place to ask questions and not an Apple user-to-user technical support forum, sorry.

  • Some of my songs in itunes are not syncing. please help

    the subject explains the problem. is there any program that will download songs to iphone without itunes doing it. itunes is not syncing all my songs
    Mary

    UM Go Blue wrote:
    Until today, all of my music was on both my Mac and iPad 2.  I too just sync'd my iPad 2 with my Mac.  Originally, none of the music from the Mac showed up on iPad.  Tried again, and now some albums are showing up, but only a few.  Have plenty of capacity/space.  Also noticed the "iPod" icon is now a "Music" icon on the iPad.  Any ideas?
    Sounds like you just updated your IOS.  Check the iTunes settings and confirm that nothing was changed:

  • TS1539 My ipod could not sync, please help

    My ipod touch can't sync, any person kindly help, Thank you

    Why won't it sync? Any error messages? If so, what is the exact wording of those error messages? Does the iPod even appear in iTunes?
    B-rock

  • IMovies works on iPad but not iPhone - please help!

    I got a new iPhone for Christmas, and was able to install iMovie, iPhoto and so on. I then realised they took a lot storage and deleted them again. Now I need iMovie again but cannot install it again! My iPad is able to but not my phone! Any ideas why or what to do?

    Hi there sera!!,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    -Griff W. 

  • Can connect to router but not internet, please help!

    I was searching, but couldn't find a thread with my symptoms...please redirect me if needed.
    however, I just got a brand new dell that is running vista premium, and I put my belkin wireless card that I was using in my old pc into the new one.  found my network, applied to wep key and connected to the router without any problem...
    but I can't go online!  I never had a problem before, and I am using the same wireless card.  my signal is excellent, so what might my problem be?  I already tried rebooting the router, but no results.  I had the same problem several months ago with my wife's laptop when we first got FIOS...but for the life of me I can't remember how I fixed it.
    any suggestions?  thank you so much in advance

    It sounds like your laptop doesn't have any - or the right - IP configuration.  When you went through the network setup, did you tell it to use DHCP?
    Some things to try (note, this is for XP but I'm guessing it hasn't change *too* much for vista):
    From a command window, try typing:
    ipconfig
    It should show you your IP address and a default route (something other than zeros, probably a 192.168.x.x address).
    If you don't get a valid IP and route, try  running: ipconfig /renew
    See if you can get to the router by pinging the default gateway address (from the ipconfig command). E.g.:
      ping 192.168.0.1
    If you still have no luck, try resetting the connection via the Network Connections panel:
     Start->Control Panel
     Double click Network Connections
     Check for DHCP:
       Right click on the wireless connection and select Properties
       Click on Internet Protocol(TCP/IP) and click Properties
       Make sure that "Obtain IP address automatically" is selected.
       Click OK in both boxes.
     Right click on the wireless connection and select Repair
     If it still doesn't work, try right clicking on your wireless connection and select Disable, then again and select Enable and then Repair.

  • My phone will not sync, please help

    I downloaded the software update today (it didn't say 2.0 but that's what I figure it is)
    And right after the update finished, I got a message from iTunes saying "We could not complete your iTunes Store request. The network connection was reset. Make sure your network connection is active and try again."
    After seeing this message, I have tried to sync my phone again four times and turned it off and back on.
    I cannot use my phone!!!! It just gives me the emergency screen What can I do to fix this? This is not cool! I was looking forward to using apps........

    If you open it in a sound-editing application or iTunes, it will tell you the format. In iTunes, just click on the sound clip and select Info to get the info for the file (format, duration, etc.).

  • Trying to upgrade to 10.4.7 from 10.3.9 but not working please help!

    ok so first off I have no problem with panther. I have been happy with my powerbook b4 titanium for the past 6 years now. but now that I went and bought a new iphone 3G , my powerbook doesn't support it. fortunately I converted my parents over to mac last year and they have a i-mac that does support it. but I dont want to have to go to their place to sync my iphone ... I am going to buy another mac even though I really dont want to spend the money but for the time being I need the help to get tiger on this laptop.
    here are the specs
    powerbook g4 titanium
    667 MHz powerPC G4
    1MB L3 cache
    512MB RAM
    OSX 10.3.9
    ok so I have 2 CD's for OSX 10.4.7
    I put the first CD in and I get the big error screen and the last command or statement darwin makes is "we are hanging here" what ever that means. but thats all it will do. the cd reads fine while OSX is up and reading files.
    any ideas?

    I hate to interrupt your fuming, Joshua, but those Apple "nazis" do still sell Tiger as of a few days ago. Call 1-800-SOS-APPL and ask for Phone Sales (not iPhone sales, but a sales department that only operates over the phone, not through the online store).
    As for "I just love how they dont support older products anymore," I think if you look around a little, you'll discover that Microsoft doesn't sell outdated versions of its OS any more, and most car manufacturers aren't selling their 2005 car models any more either. In fact the practice of not selling discontinued, superseded products is standard across most industries. Apple's continued selling of Tiger long after the introduction of Leopard is quite unusual.
    And as for the "nazi" practice of not allowing you to install Tiger on your Powerbook from the Intel iMac's discs, the machines use entirely different architectures, and the iMac discs are configured specifically for the Intel architecture. The OS on them is also licensed for use on only one computer, not multiple computers, as you would know if you read the license agreement. And while you may never have encountered this limitation before, the discs that are shipped with every Mac have always, since the mac's earliest days, been specific to that machine model and, in all but a few exceptional (and accidental) cases, unusable on any other model. Apple has never changed this longstanding policy/practice. It's nothing new.

  • Nearly there but not quite - Please help with display issue

    Hi,
    I had an issue with my mac starting which I resolved by replacing the graphics card. The mac now starts without issue BUT!
    In display preferences there is only one display resolution, no detect display button and if I try to calibrate the sliders have no effect
    I have tried resetting PRAM and SMC with no effect and also tried a different monitor
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          8 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):          CK******XYL
      Hardware UUID: *****
    ATI Radeon HD 5770: (Previously ATI Radeon HD 2600 XT)
      Chipset Model:          ATI Radeon HD 5770
      Type:          Display
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x68b8
      Revision ID:          0x0000
      ROM Revision:          113-C0160C-155
      EFI Driver Version:          01.00.436
      Displays:
    Display:
      Resolution:          1920 x 1200
      Depth:          32-Bit Color
      Core Image:          Software
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Not Supported
    Display Connector:
    Display Connector:
    <Edited By Host>

    Not everyone updates their hardware porfile but it should have been spotted that yours lists 10.5.8 which was a big clue and reason to ask and check what you are runnning.
    Apple sells 10.6.3. Unlike the prior two which did come out with 10.X.6 which would work and allow boot from DVD you may need the 10.6.8 on flash memory that comes with Lion except that is $69.
    We usually do but get tired now that we've been saying "ATI 5x70 needs 10.6.5 or later" when people upgraded their graphic card like you did.
    I wish that wasn't so. I don't know how ATI does it for Windows but they do have to retool their drivers when a new OS comes out but end up with a package that supports more than one OS version.

  • Apple TV can stream but not sync!!!

    i want to transfer movies ive bought to my mac, but currently my apple tv is set to stream with my mac, i realize i have to set it to sync instead in order to do so. however, when i hit general>computers>connect to itunes i get message stating,
    "Disconnect from itunes. disconnecting the itunes library will remove any itunes content that has been synced with your computer, cancel or continue"
    i hit continue, hear a click, but nothing happens. ive been scouring this discussions board and google for 2 and a half hours now, would really like to play these movies on my trip tomorrow, any suggestions?

    tmartine wrote:
    something stands out in your post... "... unplugging, replugging, .." i think this is one of the biggest contributers to people's problems with appleTV... what would you say to someone who said they are having all kinds of problems with their computer and they keep unplugging it and replugging it and it just seems to get worse? you'd tell them stop doing that.. your problems are likely caused by you corrupting files by doing the unplugging and replugging... so stop doing that!
    I understand your logic here and also dislike unplugging unless I have to, but I think AppleTv OS itself must be protected against this kind of thing. Media, fileslists and temporary files probably aren't though.
    I don't think AppleTV instructions say to use the mouse restart to reboot, but it seems sensible to do so, so i usually do.
    Apple must appreciate however that people will relocate the box, have power cuts, unplug the wrong plug from a strip etc etc, so if there's no formal shutdown sequence it should be made resilient to sudden power offs.
    AC

Maybe you are looking for

  • Cant Load Win 7 64 after rebuild NF980-G65

    Hi I have just bought an NF980-G65 mob., with an AMD Phenom II X4 955 (Deneb 4c) 3.2 GHz, DDR3-1333, 2 MB L2, 6 MB. I also bought the G-skill 1600 ram, I was a bit put of when it came as it was for an Intel pro, I have it set up with two Nvidia 7800g

  • HT4623 How do you get your Ipad out of restore mode

    How do you get your Ipad 3 out of restore mode? I ended up there by mistake.

  • How do I get Apache web server working ...

    How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8? When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do hav

  • I am using acrobat 9 pro. Using the optimise pdf. File size increases?

    I am trying to clean up some previously scanned images containing mainly text. The original file sizes are 80K. I use the optimise pdf tool to 'despeckle' with all the other option set to off. When I save and then check the new file size it has incre

  • Help with array program!!

    hi friends i am a new comer to java and I have been studying Arrays recently. I came across this program on the internet ( thanks to Peter Williams) package DataStructures; import java.util.NoSuchElementException; * An array implementation of a stack