I Can See It But Not Join It

Hi,
I've recently setup a Snow basestation to my cable modem (comcast) and have a connection issue. One desktop (running 10.4.7) is going into the back of the basestation and it's online just fine. My laptop (also running 10.4.7) is not able to get on the network. I can see it in the list of networks in the Airport menu item, connect to it and even see the signal strength in the menu item. I just can't actually use the connection...safari says I'm not connected and the same goes with the network preference pane. Any ideas?

OK, here we go!
First of all, delete all of the "preferred addresses".
Second, delete the DNS address of 10.0.1.1.
Third, turn off 40 bit WEP for now. We will turn on WPA when you successfully connect.
Channel should be automatic...what version of the Mac OS are your running? You have a old version of the AirPort software.
Get rid of "belkin" as the domain name.
Your Airport is not distributing IP addresses, it should, click that check box on. "Share a single IP address..." should also be checked.
There is probably no compelling reason to use MAC address verification in "Access Control". Delete that entry for now.
Restart the AirPort.
Your desktop shots are correct for a single computer connecting over Ethernet. I think the problem basically comes down to the fact that the AirPort is not being used as a router, it is not distributing addresses.
If this fixes the problem, make sure you go back in and turn on WPA with a good strong password!

Similar Messages

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

HT2471 I have MacBPro and when I call wifes I Pad, she can see me but not hear me. What can I do to fix this?

I have MacBPro and when I call wife's I pad, she can see me but not hear me. Any fix?

HI,
I presume this is FaceTime you are using on the Mac ?
Make sure these ports are open in your router
http://support.apple.com/kb/HT4245
9:37 PM Wednesday; December 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT204380 When I contact someone with FaceTime, they can see me but not hear me. I can see and hear them. What am I doing wrong?

When I contact someone on FaceTime, they can see me but not hear me. I can see and hear them. No one has ever been able to hear me. What am I doing wrong?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

I've reset the password a few times and know I am using the correct one. I get the same error on both my iPad and iPhone. Both see the network but maybe there is a problem with the router. I've also reset that a few times with no luck. Thank you.

Can see folders but not files after a restore

Hi,
My friend had his internal HDD replaced. The tech performed a fresh install from a default image on the new HDD, and then copied the files from the dying HDD to the new install.
Now, when he navigates his user home directory he can see all his folders, but can't see his files within them. I'm thinking this is because there is different UserID on the files. Am I correct that Unix will allow you to see the directories (if the group is the same) but not see the files within them, because the UserID has changed?
I've had some people suggest the following commands to fix it via vark.com:
Suggestion 1:
sudo chown -R yourAccountName /path/to/the/folder
Suggestion 2:
If it really is the user ID (check by opening Terminal and typing
ls -laF
to see who the files belong to), then it's probably easier to just change the owner of the files, again in Terminal by typing
chown -R <shortusername> /Users/<shortusername>
There's GUI tools for that, too, but you'd have to Google.
Suggestion 3:
yeah, common problem. bring up the 'Get info' panel for each of the folder(s) with this problem, and use the Sharing & Permissions section at the bottom of the panel to re-set permissions to your new users/groups, then click on the 'gear' icon and click 'Apply to enclosed items...'
Do these look correct solutions based on the symptons? I've not been able to get hands on access to the computer yet, otherwise I'd use terminal.app and check out the permissions myself.
Cheers

Yeah, I'm not convinced the tech has done the job properly since when he logs in he can't see his files!
Given the tech knew my friend's password, I suspect that after he created a new install from the default image, he then added a new user with the same name / password as my friends original account.
This would almost definitely create a new UserID wouldn't it?

Airport express: iMac read/write to pc, pc can see iMac but not read/write

airport express: my iMac can read/write files to my Windows 8 pc, not reverse. My PC can connect to my iMac (it shows on the PC as a network device) but cannot see any files or folders. Airport docs suggest that my Documents folder should be visible. Tried enabling access everywhere I can think on iMac such as SMB. Any help?

Hi everyone
I've managed to work out how to share my desktop and the external drive attached to it via wireless so my Macbook Pro can see, open, and edit and save photo files via Photoshop Elements.
I can also then view and edit them through the Windows PC - though they say some properties are missing this I can live with.
Therefore no re-formatting needed, and no downloads either.
Many thanks
Regards

Can see drive, but not volume with AEBS

Perhaps an odd question: I've been using my airport extreme base station as an NAS drive with my Seagate FreeAgent 380Gb drive for some time now, but after moving and setting up a new network (same settings and whatnot, but different geographical location), I can no longer mount the volume through the finder. I can see the drive using the Airport Utility, but not the volume that I want to mount. The volume shows up fine when I plug directly to my computer.
Oh, and it's mounted NFS+ and Disk Utility doesn't see any problems that need repairs on it.
Does anybody have any insight into this issue? Anybody else had the same problem?

is this only while using the remote app on the iPhone? if you just use the regular appleTV remote can you click on an play streamed (i.e. unsynced) content?
I have all the latest updates and don't have this problem at all but i don't have an iPhone to use as remote...

When using facetime the other party can see us but not hear us

When trying to use Facetime, we can see and hear the other people, but they can only see us. Any suggestions or settings for us to check?

Learn sign language?
Or
Probably the first thing you want to do is close face time, then doulbe tap the home button to see the task bar... Touch and hold any of those icons until they jiggle, then close them all off by touching the minus sign. Then reboot the pad by holding the sleep and home buttons until the apple logo appears. Ignore the red slider.
Sometimes this reset fixes bugs.
Then, confirm your mike is working. Open any app that records things, and see if it hears you. There have been some discussions about broken mikes.
Then try it again.

BTFON - Can see Hotspots but cannot join them

Previously I've been able to connect to Hotspots without issue on my iPhone, but recently I've been able to see the Hotspots but whenever I try to connect to them using the BT Wi-fi app it never connects.
Some areas I work in there is very little signal, but the hotspots are a god send.
I'm using the correct details to log in as they are the same as before when it worked & I'm opted in to Wi-Fi.
The one thing I can think of that could be the root of the issue is that my HH3 was dropping connection all the time, so I had to switch to an Asus N66U router instead. Does not having a Home Hub connected cause BT Wi-Fi not to work?
Any help appreciated.
Solved!
Go to Solution.

Not using a Homehub does not effect you being able to use BTWifi provided you are still opted in. Check your status here
https://www.bt.com/wifi/secure/status.do;jsessionid=TNLTTDvG784K5773JkcgPQk40Rz3LNLQdY2TL2dL7d1ff6hS...
Are you able to log on to BTWifi without using the BTWifi app? Have you tried uninstalling and reinstalling the app?
Have a look at this link for some other things to try
http://bt.custhelp.com/app/answers/detail/a_id/37354/~/bt-wi-fi-app-troubleshooting-for-iphone%2Fipa...

How do I make a form viewable on a Blackberry, can see form but not data in fields

I have many clients using Blackberries, when they recieve a form via email, they can open the form but the fields are blank. Do I have to save the form as a certain type for then to be able to view it. Have extended the rights

Your users would have to be using a PDF viewer that supports form features. I can't recommend any in particular but you can try looking around to see what's available.

Airport Utility can SEE TC, but not CONFIGURE it?

I received my 1TB TC about a week ago (dual band).
Setup
I have AT&T U-Verse with a 3800HGV-B modem/router. Before my TC I had a Linksys Wireless router with DHCP turned off (I let the AT&T router handle DHCP). And yes, I turned wireless on the AT&T router to OFF.
I knew that I wanted to let my TC handle DHCP so when I plugged the TC in and "set it up", I went to access the internet and my AT&T router put the TC on "DMZ Plus". The TC is handling DHCP for all of my wireless devices, and the AT&T router has 3 clients (2 cable boxes and the TC).
Problem
Every now and then I will go to access the USB hard drive plugged into the back of my TC and it will time out. Going into Airport Utility, it will recognize my TC, but when I click "Manual Setup" it times out trying to access the TC configuration. Internet still works, so the routing is fine, but I can not configure it. I've tried this on my iMac and my Macbook. The status light always remains GREEN.
The only solution is pulling the power plug.
My TC is on a 10.0.1.X ip schema network and my AT&T is on a 192.168.1.X schema. Am I having a DHCP conflict? Can anyone else think of why this might be happening?
ALL firmwares/softwares are updated. EVERYTHING is wireless with the exception of the ethernet cable connecting my AT&T router to my TC.
I've searched the internet high and low and can't seem to find any answers.

*This just in!*
Apparently unplugging the USB hard drive I have plugged into my TC will resolve my problem COMPLETELY. One question...WHY?!
This doesn't seem to add up, but sure enough -- If I unplug the USB hard drive connected to the TC, I have NO PROBLEMS accessing the configuration for the TC. I did notice that the USB hard drive's power light turns off when the drive is not being accessed.

In Mail I'm unable to see the mailboxes at the top of the mailbox list. I can see trash but not inbox. What do I need to do to see the entire list of mailboxes?

I cannot see all of my mailboxes in my mailbox list.

I'm guessing you are seeing the Trash in the Favorites bar.
Select Show Mail box list. If you don't see the Mailboxes icon, under View in the Menu bar select Show Mail Box List. (wording might be different in Mountain Lion).
If you still have problems, Log out under the Apple in the Menu bar. Log into Guest User. Open Mail, do you see the Mailboxes icon now?

After upgrading to Lion, I can not connect to my NAS drive. I can see it but not connect. Any ideas?

The drive is a Lacie 4 tb model. 2 (2) tb drives, cofigured raid 0.

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

I Can See It But Not Join It

Similar Messages

Maybe you are looking for