I can see my usb disk when it is attached to Time Capsule but not its contents. How do I change that?

When connected to Time Capsule
I have "custom" permissions
everyone can rfead and write
no one else has anything
When connected to a USB port
I can read and write
staff can read and write
everyone can read only
This is in my AirPort profile
Software Versions:
Menu Extra:    6.2.2 (622.2)
configd plug-in:    6.2.5 (625.6)
System Profiler:    6.0.1 (601.1)
Network Preference:    6.2.2 (622.2)
AirPort Utility:    5.5.3 (553.20)
IO80211 Family:    3.2 (320.1)
Interfaces:
en1:
Card Type:    AirPort Extreme
Firmware Version:    Atheros 5416: 2.1.14.6
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status:    Connected
Current Network Information:
BriarRose:
PHY Mode:    802.11n
BSSID:    0:1f:5b:88:89:39
Channel:    6
Country Code:    US
Network Type:    Infrastructure
Security:    WPA2 Personal
Signal / Noise:    -42 dBm / -96 dBm
Transmit Rate:    117
MCS Index:    14

I figured it out.
http://www.brighthub.com/computing/mac-platform/articles/48709.aspx

Similar Messages

When using imessage another picture comes up instead of me. How do I change that?

When using Imessage another picture comes up instead of me. How do I change that?

Plastic surgery?
Seriously, I don't use iMessage and know nothing about it but I couldn't resist that comment!

I can't load pictures to online site... Iphoto works but not aperture. I have edited photos that i exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

I can't load pictures to online site... IPhoto works but not aperture3. I have edited photos that I exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

How do I install Photoshop 13 having gotten as far as product registration. I can see the serial no when i click on the product description but have no 'link' to download.

I have done everything from the product card , entered the sr.no. on the card got the key no. and can see it on my products screen and when i click on photoshop elements 13 it shows the correct key no. but i then have no link to the download.
Any suggestions where to go from here i what i need to do next...

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

USB disk connected to TC shows on one Mac, but not the other

Hi guys!
The Time Capsule works just great! I'm running it bridged in my existing network, with WiFi turned off.
And the USB disk shows fine on my Mac, but not on my colleagues' Mac. TC shows on both. What am I missing here?
The USB disk will serve as "file server" and will be backed up onto TC together with the macs.
Update: Whoa - now it suddenly shows up on both machines. Go figure.
Message was edited by: Niklas Wikman

Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on.

IPhone 4 & iPod Touch can connect to Time Capsule, but not Internet

My family and I have an iPhone 4, iPhone 3G & iPod Touch. Our WiFi comes from a Time Capsule. My Macbook Pro can connect to the WiFi and get online, but the iPod & iPhones can only connect to the Wifi, not actually get online.
We some issues with our ISP last week, which took some time and some messing with the settings on Time Capsule to resolve. At one point, Airport Utility asked me if I'd like to switch to bridge mode...I'm not sure if that ever happened or not, to be honest, and don't know how to see if I'm in bridge mode or not (or even what that means, really).
With my iPhone 4, I can successfully connect to the wireless network, but the icon in the top left of the screen stays on 3G (unless my service drops in my house, in which case it shows the WiFi icon but won't let me connect via Safari or any other apps).
With the iPhone 3G, it does connect, but doesn't ever show the WiFi icon.
With the iPod, it says it connects, but doesn't ever show the WiFi icon. I get the error "Safari cannot open the page. The error was: Operation coudl not be completed. Invalid argument."
Does anyone have any idea what I could do to resolve this?

I fixed this on my own. How did I do it?
1. Reset Time Capsule to factory settings (via Airport Utility)
2. Renamed my WiFi network
3. Restarted my router
Everything's fixed. I've seen this problem all over the Web but no solutions, so hopefully this will help someone.

I can ping and browse shares on time capsule, but not make backups from other location connected with MPLS?

Hi
We have just bought an Apple Time Capsule with 3TB of storage, to make backups of our users macbooks. It works fine at the office1 where it is located, but from our other office, time machine backup doesn't work. The offices are connected through a 100Mbit MPLS connection with no firewall - everybody in office1 can see everything at office2, and vice versa. The users at office2 can ping the time capsule, and they can also browse network shares on it.
The only thing that doesn't work, are time machine backups.
The only difrence I can imagine is, that the the machines at office2 are on a different IP subnet, that is being routed through the MPLS connection.
Is there a problem with the AFP perhaps? SMB and ping works fine, my guess is, that AFP doesn't like the fact that the clients are on a different subnet than the time capsule. But what can be done about this?
Best regards
Peter Bak

Thanks Linc ......you were right on the money. Your help has been awsome. I spent 3 hours last night doing stuff with out any solutions. May I ask you another question if you have the time and patience please. My orriginal setup was 2 windows laptops with XP on them connected with a timecapsule attached to a router. Hence the time capsule made a wireless signal aswell as being an external hard drive. On one of the laptops i have a printer attached to it which was shared so that the other computer could print documents through the network however the computer attached to the printer has to be on. Do you know what i have to do so these new 2 mac book pros can print to that printer? Thanks again for all your previous help. Nick

When I'm texting somebody it shows their number not their name how do I change that?

Whenever I'm texting somebody their number shows up and I wanna see their name when I'm messaging them. How do I change it using the IPod 5th generation?

On the recipient's device, the "name" displayed for the sender is based on the information for the email address (or email address) you used to send the Message in the recipients Contact app.

Is there a way to make Time Capsule back-up its contents to an external hdd connected to it's usb port.

     I wanted to know if there is anyway i could automatically backup my time capsule to an external drive connected to it's usb port. I tried using automator to make it copy newly added files into the external but it didn't seem to work as i had hoped and i wanted to know if anyone had any experiences in using other programs to copy the contents of one folder in the TC to another folder in a drive externally connected to the TC and also keep the contents of both folders up to date.
    In short, I am basically trying to make a "raid 1" and i know that TCs dont support raid natively so thats why i asked if anyone knows of a program that could do it from the mac side.
                                                                                                     Thanks.

Carbon copy cloner might work.. expect it to be very slow.. especially if you are using wireless.
There will be various rsync shareware available.. but like your experience getting it to actually work is loads of fun.. or NOT.

When I try to buy an email Gift Card, I get a message that my account is not eligible. How do I change that?

I can make album purchases, etc. and I have no gift card balance, but it won't let me buy an email gift card to send to my neice (whose iTunes account also uses my credit card).

Go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Regards.

When opening a likn in outlook, it opens the page in IE NOT Firefox. How do i change that to open in Firefox?

If I receive in Outlook any link to open in a browser, it defaults to IE even though Firefox is my default browser.
How do I get links to open ONLY in Firefox?

Thank you for your response! I did figure out that it was an extension that I needed to delete from the control panel. It is back to being a blank screen, now. Any chance you would know an extension to change it to my homepage?
Thanks again!

I cannot see my new WD My Passport for Mac hardrive in finder, it has USB 3, compatible withUSB 2. I can see it in disk utility

My new WD My Passport for mac,1 Tb harddrive in finder. it's there initially then disapears, I can see it in disk utilities and in the systrm report, so I think it is moounting, but difficult to access and to ejet when not visible in the finder sidebar. This has a USB 3 connection, whic i states is also compatible with USB 2

Check the format of the drive when in disk utility. It should be
Mac OS Extended (Journaled)
A powererd external usb hub can help when the computer's usb port is marginal.

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

AirDisk - cannot see the USB disk in Finder

Dear all,
I just brought the Airport Extreme Base Station with the purpose to use an external HD shared with all my Macs
The AEBS works quite well, but I’m not able to see the USB disk in the Finder…
In the airport utility I can easily see that AEBS recognize the USB disk, and that that disk is connected, and I’m sure that that disk works well and that is formatted as Mac OS Extended
Even after checking the huge problem affecting this firmware release (mine is 7.2.1) and following all of the suggestion posted by the community (connect, disconnect, restart, pray for an update) I cannot even see the disk in Finder…
I’ve heard of people that cannot mount or access or disconnect… but I cannot really see the disk itself…
Any suggestion?
Thank you very much in advance

Hi!
I got mine working now! As the problem started to seem like an authentication issue (disk was in "connecting" mode for eternity) I started to think that the problem might be actually in MacBook Pro/Leopard end of the system rather than in the Airport Extreme or AirDisk. I tried then to create a new account and "account preferences" application got all stuck - was not possible even to force quit. I then forced the MacBook to shut down with the power button and rebooted. A miracle happened! Now I can see the folders of the AirDisk and can copy there. Next I will test whether I also have the same problem that backup with Leopard to AirDisk is extremely (read prohibitive) slow.
I hope this simple trick helps others as well
I am keenly waiting for the next Leopard update... have to say that being used to great Apple user experience this has been a major disappointment. It seems that Apple is leaving us alone with our problems. They should facilitate somehow these forums and pull together FAQ's as suggested by many.
br pertti

I can see my usb disk when it is attached to Time Capsule but not its contents. How do I change that?

Similar Messages

Maybe you are looking for