I can see the main menu on TV but does not respond?
I have tried disconnecting Apple TV but can not get it to respond with remote, don't know what else to do, any suggestions?
No luck, remote does not let me go to settings to change anything. Tried holding down MENU key with right button for 6 seconds and will not respond. How frustrating, been trying for the last 2 hours and nothing. Appreciate your help....thanks.
Similar Messages
-
Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!
Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.
-
I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!
I agree with Kappy.. passing files and especially via wireless is slow as slow.
Just need to be sure your TC is the new AC model??
And the OS on the computer is Lion?
Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
Give us the full picture of the network.
Then we can help you get into it.. whether you should put your files on it is another question. -
I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all helpThe supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource. -
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin -
Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik -
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
I am trying to sync my songs in iTunes to my iphone4S, its running on IOS 7.3( the recent update) it just does not sync. I can see the songs in my library but they just don't transfer. Please help!
I have Macbook Pro running latest Mavericks with latest version of itunes as well.
I have tried coiple of options which were posted here in discussion forum but none of them worked out for me.
Any help would be appreciated.connect device and open itunes navugate to music and click the box that says all music library and click sync or apply bottom right corner
-
Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
RafMake a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT -
I converted the video to .mp4(MPEG-4) format. I can see the video in iTunes library but i can sync it to the iPod. It is showing that the video cannot be played in iPod. What to do to sync the video successfully??? Please help.........
Highlight the video in iTunes and choose Advanced -> Create iPod or iPhone version and wait for it to finish converting. Then try and sync the newly converted version over to your iPod Classic.
B-rock -
Hello I have problome with YouTube on my apple tv. When I add playlist on my Mac I can see the movies and play them but I can't see the movies on my appletv only the name of the playlist and I am can't watch the movies. Anyone know the problome? Please..
Geesh - all this information and no one has any clue to this? Not even someone from Apple?
Can someone at least point me in the right direction? -
After upgrading, I can see the icloud choice in settings but it is pale gray and I am unable to select it.
I have the same problem. In your mail settings are the "Accounts" options also faded? My twitter option is also faded as well and I have no idea whats going on (iPhone 4). I seemed to have set up iCloud through some of my apps but I can't manage them at all in settings. My mail is also working fine but I can't log off of any of them.
-
My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
Please I need to know what do I have to do.
RegardsIf you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do. -
My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.
Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ... -
When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.
Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?
Maybe you are looking for
-
Do they make a PCI card for Macs that can convert analog video to DV? I would imagine it would have inputs for RCA (Red, White, Yellow) and maybe an S-Video imput as well. I have seen them but I dunno if any work for Macs. I don't know if I could imp
-
I am running a Cisco ASA 5550 in active/standby mode. We are currently running ASA OS v8.2(3)5. I am wondering if there is a way I could limit source IP concurrent connections coming in my outside interface. Does the ASA have a feature/ACL syntax
-
Remove Planned Purchase Order from Type field on Purchase Order form.
Have requirement to remove Planned Purchase Order from LOV on purchase order form in 11.5.10.2. Tried to disable the Planned Purchase Order document type but Disable field isn't updatable. How can I remove Planned Purchase Order from LOV?
-
Validation problem, HELP required
I have the followig HTML form, I have tried validating the values using Javascript but have had no success. I am trying to validate the following: "set1ar" "set1aw" "set2ar" "set2aw" "set3ar" "set3aw" "set4ar" "set4aw". I have to ensure that only int
-
Hi....I'm a SAP ABAP developer and new to SAP HCM...I want to know if is possible to implement SAP HCM module as a stand alone product without implement FI-CO modules or without having interfaces to another SAP ERP system, my client only need a HR sy