I can see the result column but not overall result in the query

Hi all,
How to display the overall result in the query, I am able to see the result value in the query and not the overall result!!
Thanks

Hi Pooja,
I hope you have to check the Display property of the attribute.It should be always display.
Regards,
Vasanthan V

Similar Messages

I can see songs in itunes but not in ipod

Hi everyone,i have this strange problem,i can see the songs in Itunes,i can see them in windows exporer,i can play the songs too,but the ipod shows that there is no songs in it,and in itunes and windows i have 905mb free space and ipod shows that is empty,What can i do,thank you

I have the same problem described by vickgeo1981. Just downloaded itunes 11.3.1.2 on new PC with windows 7. Accounts are now set up ok and itunes let me download my music and new podcasts to this pc. itunes told me I had to upgrade ipod nano software so I did that to 1.0.3 PC. itunes shows the ipod when connected. settings are to sync all Music and all podcasts. sync appears to work and itunes shows the ipad contains the songs, podcasts, and playlists. After disconnecting ipod from pc it shows no music and no podcasts. I have tried more than 1 usb port on my pc. I have restarted my ipod. I have restarted my pc. I have again reloaded my ipod software. No change in the result. sync appears to work. itunes shows the content on its window of the ipod but no content on the ipod itself.

IMac can see my Macbook Air but not my Macbook

Recently upgraded iMac and Macbook to 10.5.8, Macbook Air running 10.5.7
Both laptops connected to iMac via Netgear wireless router.
All was fine until yesterday.
Now my iMac can't see the Macbook but can see the Macbook Air when I go to Finder/Network on the iMac.
Curiously, the Macbook and the Macbook Air can both see the iMac when I go to Finder/Network on the two laptops.
Have unplugged the wireless router from the mains for five mins to reboot it.
Can confirm that Security/Firewall on the Macbook is set to "Allow All Incoming Connections"
Anyone any suggestions???

try this:
http://discussions.apple.com/thread.jspa?threadID=2119171&tstart=30

HT1386 Problem syncing latest audiobooks. I can see it in iTunes but not on the ipod.

I have a problem syncing recently purchased audiobooks to my ipod. I can see it in iTunes library but not on the ipod. Not even the folder 'books' is visible on the ipod.
Hope you can assist
Y

Good day to you and thanks for this prompt response. Are you referring to a music app on an iphone? I have problems with an ipod.
Hope I'm not showing off my ignorance here.
YBach

Ipod nano, I can see it in windows but not itunes, Tried EVERYTHING!

Please help.
Starting a few weeks ago my six month old ipod stopped being 'seen' by itunes. I can see it on explorer no problem. I have followed all the steps in the support pages, apart from re-installing windows.
However I have found it doesn't work on my main computer of either of my two laptops, which makes me thinks its an ipod problem NOT a computer/windows problem.
I have a shuffle which is working fine on itunes on the same computers.
The only thing I cannot do is restore the nano - because you need an itunes connection to do this.
Can anyone help please?
Ipod Nano. Windows XP itunes 7.02.16

At least I'm not alone in this problem...
I'm in the same boat. My Nano did work with iTunes 7 for a while. The only glitch was that it couldn't update the iPod's software. Since it stopped appearing in iTunes a few weeks ago I've tried everything I can think of (except sending it away) to fix the problem (restart/reset, reinstall iTunes (6 & 7), check services, format comp., change drive letter, etc...). It won't appear in iTunes on other computers either. Further I've run the iPod diagnostics and everything gets a green light. Hardware, software, me? I haven't a clue as to what the problem is. Argh.
I like the music on my iPod but it would be nice if I could listen to something different! I'll have a chance to stop by the store it came from soon but in the mean time...does anybody out there have ideas?

Can see VCR in viewfinder but not in imovies

Hi,
I am trying to convert old footage from my vcr thru sony dcr96e into imovies. when i play the vcr i can see footage in my camcorders viefinder but not in the imovies screen. it does say ' camera connected ' in imovies so its definately recognised. i pressed import to see what would happen and it took just a snapshot of footage like a photo.
thanks

Hia there!
Anoying isnt it? Your on the right track, but sometimes you need to have a tape in the videocorder. (a blank1 as you dont want to risk anything)
then you need to sweettalk the import button press and HOLD til u see the numbers moving on imovie screen ...
You may need to try several times I guess your teaching the pc to see somehow
(its blind) ?
Go with tiger!
Ivar. . .

Can see ATV on Mac but not XP

Hi I wonder if anyone could please help. I can see and have set up my ATV on my wireless network to sync with my Mac mini and its working with no problems. I would like to stream content from two PC's running XP that are on the network but no matter what I try I cant get the ATV to show up in iTunes. I have tried on 3 different PC's with no luck, I have tryed most of the suggestions that I could find from searching (firewall off, turn syncing on and off on ATV, reset ATV and router, reboot PC). I would be very grateful of any suggestions. Thanks in advance

When you set up for streaming content on XP computer did you request to connect to new itunes and receive a new password number. Once you receive this number Apple TV will show up briefly for you in the device list in itunes to enter the new password. Once you have entered this number Apple TV will disappear from the device list in itunes, but will appear in apple TV enabling you to stream content from your XP machine. Did you go through this procedure?

Help: I can see playlist in cpu, but not on ipod

Hi:
1. I have a bunch of playlists on my ipod touch (current iOS) but just recently developed a problem where I can see / listen to a specific playlist via my cpu but I can't see that specific playlist on my ipod touch (even though I can see / listen to all of the other playlists on my ipod touch). Furthermore, when I hook up the ipod touch in my car, I can scroll to that playlist and listen to it as well.
2. Any solutions to this problem?
Thanks in advance for any advice. Harry

Never mind...I think I just figured it out. I have a 300 GB hard drive with a volume label of "300GB" mapped as a network drive to E: on my laptop. I was just looking through other threads and I think my laptop is getting confused between the ipod and this network drive...I'll just map it to a different letter and see if that fixes it.
amazinglarry77

Can see song on mac but not at the spot placed on shuffle

Hi,
My son's problem is he placed a song at a
certain place on his ipod shuffle. It can be seen
when it's mounted on our mac but it's not at that
place when he's listening.
Thanks for any suggestions
Robert

I noticed that recently. I think it's a bug in iTunes (not sure when it started). I put a song (actually a podcast) first on the iPod's ordered list, as seen in iTunes. I see iTunes sync with the shuffle. When I play the shuffle in sequential play mode, it is not first. I used to do this often, so I know it worked before.
My work-around - After moving the song, click on the column header for Artist or Name (anything to change the sort order). Then, after iTunes syncs the change, click back on the left-most column header to change the sort order back to load order (the one where you can move songs around). When the iTunes updates the shuffle again, it seems to update the shuffle properly and that song will play in the correct order (on the iPod).
I wrote a bug report here,
http://www.apple.com/feedback/
so if it's the same thing I described, you may want to do the same thing, just so Apple has another report.

Time Machine can see my old backups, but not open them

I have been using Time Machine with a Time Capsule (1TB) since last June (on this machine) - quite a few backups in there.
Last night when I went to backup, first time in a few days, it said the machine had never been backed up and started the preparing the disk thing - I couldn't find a problem, everything looked fine on my time capsule - couldn't do anything else, so I let it run. This AM it had finished the backup (in fact several) and when I open Time Machine it shows me as having backups all the way to June '08 -- however, it cannot seem to open anything earlier than last nights -- if I try to scroll to them it greys out. If I try to directly click on one, I get an empty finder window that never seems to update (at least not for 5-10 min) and then I cannot get any response from anything, have to restart to get out.
There are two things that I can think of that could have caused this -- I updated to 10.5.6 since my last backup, and I backed up a second Mac to the same time capsule in the interim (that backup went fine and seems to be working, but very slow)
My console is not reporting any errors (for backup or for anything else). It would be nice to get back to my old files, it certainly seems to know they are there. Any thoughts?
thanks
Jim Hendler
RPI

I'm having this same issue and would like to know what I might be able to do.
I started using TimeMachine so that I could wipe my internal HD and be able to restore the settings. Now that I've wiped the HD TimeMachine doesn't seem to be doing what I expected it to do or I don't know how to restore the files.
Any help would be wonderful!

Can see games in iTunes, but not in Summary-Games page

I had to reformat my hd. I copied all of the files I knew I needed to put back on that hd onto an external hd. I installed itunes onto the reformated hd and then copied all of the files from the "backup" on the external hd. All of my music, videos, and podcasts are fine and loaded onto my iPod. All of my games are visible in the Games section of iTunes, but the Summary Tab for games is blank. I'm running the most current version of iTunes and my iPod is recently updated. What's going on?????
Mish-Mash 1gHz Windows XP iPod Video 80 gig

Never mind...I think I just figured it out. I have a 300 GB hard drive with a volume label of "300GB" mapped as a network drive to E: on my laptop. I was just looking through other threads and I think my laptop is getting confused between the ipod and this network drive...I'll just map it to a different letter and see if that fixes it.
amazinglarry77

Can see person on mobile but not desktop

Hello,
I was trying to find a person on Skype, and when I put their username in via desktop Skype it did not come up. At first I thought I had been blocked by them, but: When I put the same username in mobile Skype (Android 4.4.2), it turned up instantly!
Any thoughts on what could be causing this? It is not a person with whom I have shared contact details; in fact it is a person I removed from my contact list a while ago.
Solved!
Go to Solution.

Try to update your Skype to the currently latest 7.1 version:
http://www.skype.com/en/download-skype/
A bug in the previous 7.0 version made it impossible to search for contacts which were previously deleted from the Contact List. This bug is now fixed in the latest 7.1 version.

Submit button missing from form, can see it in Pro but not in Reader XI

I've created and disributed forms in the past with no problem, however, when I open up my form in Reader XI, the submit button is missing. In the purple ribbon, it instructs people to click the submit button once the form is complete but there is no button showing. Help!

What does this command say:
ls -ldaeO@ Documents
If it has 'hidden' attached to it, then look at the "man chflags" command.
chflags nohidden Documents

I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic.

OK..this forum help me locate my iPhoto so HOPEFULLY ya'll can help me w/ 1 another issue. When I open an event in iPhoto...I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic. Its really weird that I can see the pic but cant open it. Hopefully we can correct this issue. Also, if anyone has the energy....pls tell me how I can export from my iphoto-I want to place all my pics on CDs or my external hard drive and when I try to export it says.."unable to export.." I dunno!
Help PLZZZZZ!
Lost again,
Amanda

The two problems are related.
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
And that's why you can't export as well.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik

I can see the result column but not overall result in the query

Similar Messages

Maybe you are looking for