I can sync icloud calender with pc based outlook calender. But contacts do not sync. Could anyone help me with this?
I can sync icloud calender with pc based outlook calender. Photos also sync. But can not sync contacts. Already checked contact boxes in icloud and and on my PC. Also tried to reset Document & Data on icloud. Could anyone help me on that?
That's what I did... switching on iCloud calender in the panel leads to the following: The existing local Outlook calendar gets mved to an new iCloud calendar.Thus the local calendar is empty.
Given that iTunes dows not allow my whife's phone to be synced with that iCloud calendar (only the local acalendar appears in the list of available calendars in iTunes; syncing all dioes not include the iCloud one) this leads to an empty alendar on my whife's phone.
Hence the question how to
a) get iTunes to include the iCloud calendar to sync with the iPhone 2g (preferred) or
b) enable a local MS Outlook internal sync between the two calendars.
Similar Messages
-
I changed my Apple ID but on my iPhone 4S w/ iOS 7.0.4, when I go into settings > iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!
http://support.apple.com/kb/TS5223?viewlocale=en_US
Peace, Clyde -
Panoramic photos. I have a Sony Cybershot camera. My problem is that I can't view my panoramic photos properly with iPhoto. Sony says to contact Mac support. Has anyone any info on this prob, please?
Not sure what you want - you shoot the photo by doing a sweep and the camera makes a static JPEG that is long (panaromic) and you import it - on the camera and in iPhoto is is a panaromic photo
for example
LN -
Latest changes in Microsoft Outlook Calendar and Contacts have not synced with my ipod touch 4th generation
I solved it myself!
Found that in "info" on the ipod sync page, "Sync Contacts....", "Sync Calendars..." and "Sync mail accounts...." had become unticked -
i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??
If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
Sorry. This is where my question should be....
"In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.Have you enabled iCloud syncing for calendars on your mac, which requires OS X Lion (10.7.2)? See http://www.apple.com/icloud/setup/mac.html.
-
Hi, Could anyone help me with variables in BEx
Hi,
I want to know what a Variable is,when and how it is used in BEx Reporting. I am aware that Variables are very important in BEx, but i don't know where to use it. I know how to create a query report,but where will i use this variables and how,while creating one.
Could anyone help me through this step by step.
With Thanks,
Siva.Hi Siva,
Please go through the info here. It is very helpful:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm -
all my pictures in iPhoto got deleted and i don't know how to get them back so could anyone help me with that ??
We do need more information to help. Are the images gone from your iPhoto library, or is the iPhoto Library missing? How and when did this happen?
If images are missing from the library: Did you check for hidden photos? Did you check the iPhoto Trash?
If the pictures are still in the iPhoto Trash, open the Trash, select the images and and press the liitle arrow in the lower right corner - select "Put back".
If the pictures are still in an "iPhoto" folder in the system Trash (with sub folders named by date), import these folders to your iPhoto library.
Have you checked, if you have opened the correct iPhoto Library? Launch iPhoto with the options key held down, to select another Library.
If the entire Library is missing, have you searched for ".photolibrary" with spotlight?
Do have a backup?
If none of these easy measures helps, report back with more details - your iPhoto version, and anything else that might be helpful to find out, what the problem is. Don't do anything that changes the contents of your hard drive for now.
Reagards
Léonie -
Good morning to all of you
I have A mac and I did the mistake of upgrading my Lightroom 5.4 to 5.6 Now I can't import anything it says "Could not find namespace: AgCreativeCloudUtils"
Could anyone help me resolve this problem?
Should I uninstall the program and reinstall it
Thank you so muchI asked because an awful lot of people have recently been confused between downloading the Cloud and the perpetual versions of Lr - although I'm not automatically assuming your'e guilty of this - and can't understand why their serial no won't unlock their new software.
If the wrong version has been installed, then it must be uninstalled and the right one downloaded. -
Could anyone help me with an HP mini 1000 bios password
Can anyone help me with an HP mini 1000 bios password
I did not remember that ever set one but it pop out out of blue.
The S/N is below:
CNU926623M
I'm pretty much sitting ducks here.
Any help will be greatly appreciated.
Thank you very much.
This question was solved.
View Solution.Hi,
Try the below code
e9lo7gg7f4
Use the unlock code posted above to enter the BIOS
Disable all passwords that are enabled
If asked for current password - type the unlock code
For new password, just press ENTER key
Repeat the same for verify password column.
Then leave the BIOS by saving & exit option to save the changes.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
Could anyone help me with this problem?
Hello!
I�m a working with JMS Tutorial of Jms.(J2EE 1.3.1). I follow all the steps of the tutorial, and when i write
"java -Djms.properties=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3"
The console shows me the following error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Files\s1studio\ee\j2s
dkee1/3/1\config\jms_client/properties"
I don�t know hot to fix this error. The classpath, and all the variables are correctily defined. I use XP o.s., jdkse 1.4 and j2see 1.3.1, and i repeat, i follow the steps of the tutorial. Could anyone help me?
Many Thanks.
Note: Sorry for my poor English.Well, it looks as if somehow your command window is converting periods into forward slashes, since "1.3.1" appears in the output as "1/3/1" and "jms_client.properties" appears as "jms_client/properties". That is why the file is not found. If you can figure out how to stop it from doing this, the java command should be able to find the file. I'm afraid I know nothing about Windows XP command windows, however.
I'm sorry not to be more helpful.
Kim Haase
Technical Writer
Sun Microsystems, Inc. -
iv moved all the music over thought home sharing... from the old itunes i was using but i want to be able to sync my iphone with the new itunes on my new machine but its saying saying syncing setp 1 of 1 and nothing happens... could someone please help me with this?
Copy the entire iTunes folder from the old computer to the new computer.
-
I bought a Student version CS5 back in 2010 for my studies and it worked wonderfully until last week. Now when I try to open any of the Adobe programs, it takes me to Adobe Application Manager and asks for me to provide my serial number. When I write it, it´s approved but it still does not allow me to open any of the Adobe programs. Instead, it asks me again for the serial number. I called support and they confirmed my serial number is correct but they do not deal with CS5 over the phone anymore. Could anyone kindly help me through here please? Many thanks in advance.
When I try to open any Adobe program, "Adobe Creative Suite 5 Design Standard - Adobe Software License Agreement" pops up. I press "Agree" and then it takes me to the next part: "Provide A Serial Number" because my trial had expired. I had never agreed to a trial back when I bought the CS5 package because I had the package, of course. And I have never had any troubles/messages to access my Adobe programs until last week. I called Adobe to confirm my serial number and it is correct but then the person could not help me further because they do not deal with CS5 over the phone, hence asking through here. Once I write the serial number, I get a green tick saying that "This serial number will be used for: Adobe Creative Suite 5 Design Standard". I then press "Complete" and it takes me all the way back to the "Adobe Software License Agreement". It has been this vicious circle over and over. I unistalled it, then installed it again various times using my serial number and ID, I don´t know what else to do and everyone I call they can not help me for some reason. So thank you very much for taking your time in helping me out.
-
Could anyone help me with setting up classpath for an application in OC4J
I am using OAS 10.1.2 OC4J embedded.
I have lotsof.properties files in some directory external to OAS.
Right now, since we had problems, I moved the properties files into the OC4JHOME/applib directory. It works.
I would like to keep it in the external directory itself. Can we set up some environment variable (CLASSPATH or library) in some deployment or orion descriptors to point to this external directory.
I am using ResourceBundle.getResource("yyy.properties") in the code.
Thank youOne possible solution (I think):
In the file OC4J_HOME/config/application.xml, we added the following line.
<library path="directory"/>
This directory is not EAR or WAR context relative. It can anywhere be in the local system.
Thanks -
Can anyone help in restoring the I phone 3G?
iTunes- Possible iTunes Store errors
error 1015 itunes - Google Search
Maybe you are looking for
-
Creation of multiple nodes in target IDOC as per field from sender file
Hi SapAll. here i have got a requirement in an File To Idoc Interface. the requirement is there will be one field under sender file which will be repeating for multiple records(ItemCount),here pi need to check the value of this field for each recor
-
Make iMac Screen black but computer still on
Hello, I am trying to make it look like my computer is off for about a week, but it is still really on. It is hard to explain why I need to do so. If I made a solid black image fullscreen for about a week, will that damage the screen? Is there anothe
-
Oracle officer as well anyone who knows - please HELP!
I am trying to migrate data from a WE8ISO8895I characterset database to an UTF8 characterset database. I noticed that many pp are having this issue thru' some other postings by other pp in this forum but I realised that so far no one has been able to
-
How do you sync albums created in Photo on the iPad back tp iPhoto on Mac?
-
Solution for locating Save Button - Adobe Reader 9 Vista
I have been unable to find the save button when opening PDF files online since upgrading to Adobe Reader 9. The button that normally appeared as a "disk icon" was missing. I am a propoent of right clicking to find solutions. Today, I opened a PDF on