I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?
I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?
The message requesting that you download Adobe Flash Player takes you to FP requireing an Intel processor. Doesn't work on a PowerPC processor. I fould a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Cheers, Tom
Similar Messages
-
I have a iMac version 10.6.8 and used to have adobe flash player my laptop requires me to download the latest version of the player but warns me that there is a "risk" downloading from the internet. Anyone else experienced this and may have some solutions
Install it directly from Adobe. Ensure that you use the uninstaller before installing.
-
It`s all said in the headline. Hoping for an answer.
Thank YouYou can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer. The message is that there is not enough space. I tried deleting my files, but it didn't help. any suggestions?
How much space is there according to airport utility?
TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC. -
How can install adobe flash player for windows 8 pro internet explorer
how can install adobe flash player for windows 8 pro internet explorer
how can instal flash player for internet explorer metro ui
where can i watched video tutorial for this or help me pleaseI can't tell from the screenshot, but it's possible you are running in the Metro version. Could you try this page using Internet Explorer in desktop mode to see if that helps?
right click in the browser and click the tools button
In the menu that appears, select "view on the desktop"
Once IE launches in the window, do you see your Flash content? -
Hi ALL,
hope you are well.
I can't remember my Answers for the security questions and i can't reset my Security questions because i don't have a rescue mail what can i do?
and i tried calling the security support team and they told me they will send me an instructions how to do it and still got nothing till now.
So please can i have some support.
I'll appreciate your help.
ThanksReset Security Questions
There are several different methods. Try one. If it doesn't work,
then try the next one. Don't try to do everything at once.
Frequently asked questions about Apple ID
Manage My Apple ID
Note: you may need to continue entering false answers to the questions until you trigger the response needed to start making changes. It will take six or nine retries.
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Using Network share io try to copy over my Windows files to the desktop of my iMac which I have done many times before successfully and now I get a message
reading "Items can’t be copied to “Desktop” because you don’t have permission to read them."
I am currently running Mavericks 10.9.5You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
what should i do if i can't remember my security question's answer because i do not have a safety email for apple to send the reset question/answer link? my safety email got deleted
Your only option will be to contact iTunes Store support and see if they can help you. Click on this link and choose the Account Management option, and create a new case with iTunes Support.
Good luck! -
Dreamweaver CS4 Content on this page requires a newer version of Adobe Flash Player.
I'm working with the CS4 Design Premium Suite. I've done all the updates. I've followed all the steps in the training.
I've used the adobe media encoder to create FLV file from a windows media clip.
Then on a simple new html page. saved to a brand new local folder I try to insert my conent:
I use menu command "Insert _ Media _ FLV" I browse to the file, I insert & save the page
I can see a place holder in design view but if I go to live view I see the message"Content on this page requires a newer version of Adobe Flash Player."
If I preview to a browser I get the same thing,
If I go to the local folder and access the page directly I get the same thing.
I alse created simple SWF file in Flash CS4. Saved in the root folder.
I use the menu command "Insert _ Media _ SWF" I see a place holder.
Save it, save all the files.
Same thing. Content on this page requires a newer version of Adobe Flash Player.
I read online where others are having this issue, someone one said "Why are you using "swfobject_modified?" "Try swfobject.modified"
tried with no visble change.
I thought that flash & dreamweaver are supposed to be fully intergrated?
Why are these seemingly simple operations causing me so much grief?
I'm days behind in my training & on my project due to this problem. Any help anyone could offer would be appreciated.
Thank you!Again... a novice at the "code"... is this helpful?
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="250" height="420" id="FlashID" title="Spaceman USA UNITS">
<param name="movie" value="/web/units.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="/web/Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="/web/units.swf" width="250" height="420">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall" value="/web/Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object> -
How do I download Adobe Flash Player for a computer that does not have internet?
How do I download Adobe Flash Player for a computer that does not have internet?
Hello Walter,
that's it, usually you get and Adobe Flash Player Installer only. For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
Hans-Günter -
Hi Frnds, Content on this page requires a newer version of Adobe Flash Player.
I am making my own website an
d i have inserted fla videos but i receive
" Content on this page requires a newer version of Adobe Flash Player" Is there any
way that i can make it. pls help me thnx......What products did you use to create this website - Flash, Flex, Actionscript, Dreamweaver, ...? Please go to the appropriate product forum and ask there.
-
Where can I download adobe flash player for iPad 3
Where can I download adobe flash player for iPad 3
ericamakpa wrote:
Where can I download adobe flash player for iPad 3
Nowhere, because Adobe is ending Flash Player for all mobile devices:
http://www.engadget.com/2011/11/09/adobe-confirms-flash-player-is-dead-for-mobil e-devices/ -
Solution center suddenly ask for enabling Adobe Flash player for internet explorer for scanning
Solution center suddenly ask for enabling Adobe Flash player for internet explorer for scanning. However, flash player is installed and enabled, but HP Solution center keeps asking for enabling and doesn't let me scan.
Any suggestion?Hello there! Welcome to the forums @yuvalyanai
I read about the issue you are having with scanning, as you are seeing a message to enable Adobe Flash player.
To begin, I would like to know some more information:
Which operating system you are running and which printer you are working with?
How Do I Find My Model Number?
Which Windows Operating System am I running?
Can you make copies successfully?
Can you print from your computer?
Have you tried updated Adobe Flash player?
Can you scan successfully from Microsoft Paint?
How is your printer connected to your PC, wireless, ethernet or USB?
In the meantime, try resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
I hope to hear from you, have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with
You have 14 days from date of purchase. You need all the packaging plus your receipt.
-
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.
Maybe you are looking for
-
March 2015 TechNet Guru Awards! See who's boss in VB! It could be YOU!
The results for March's TechNet Guru competition were posted! http://blogs.technet.com/b/wikininjas/archive/2015/04/17/the-microsoft-technet-guru-awards-march-2015.aspx Below is a summary of the medal winners for December. The last column being a few
-
i need to install OS X 10.6.8 or newer.. I have 10.5.8, how the heck do I get 10.6.8 on my macbook pro
-
IRVLJWTA: Exceeded configured maximum number of allowed ...
Hi all, when creating a pivot table and setting a colom into the section, i'm getting the IRVLJWTA: Exceeded configured maximum number of allowed output prompts, sections, rows, or columns. Can anyone give me an hint where to configure this setting?
-
Weblogic Portal feature not appearing after installation
Hi, I have installed Weblogic 10.3 Server. And when I try to create a portal domain / portal project I don't have such option at all(New > Project > Weblogic Portal is not appearing). Could anybody help me out saying whether I need to get a different
-
Ask help for install solaris 7
When I Install solaris 7 in my server sun140(ultra 1), This Message display on my screen: ---------------------------------------hereinafter---------------------------------- ok boot Boot device:net File and args: Timeout waiting for ARP/RARP packet