I can't access my 1st generation airport express devices using airport utility

I have a new Motorola Surfboard Extreme wireless cable modem & router set-up on my main internet cable line. To it i've connected 1st generation airport express using an ethernet and extended it with another 1st generation airport express so i can connect to itunes and a remote printer.  When I go to Aiport Utility to perform the set-up, i'm told i need to update to version 5.6.  When installing Aiport Utility 5.6 I receive an error prior to completion which prevents me from performing the set-up or even seeing the two airport express devices in the program.  Anyone have any ideas on how to fix this?

By "1st generation" AirPort Express are you referring to the 802.11g or 802.11n model? Version 5.6 of the AirPort Utility would be required to administer the older 802.11g Express.
If you do have an 802.11g model, are you actually running OS X 10.7.5 on your Mac?

Similar Messages

  • Can't find Time Capsule with Airport Utility on ethernet but can on configure other.

    OS X 10.8.4, 24" iMac,TC 1st generation, Airport Utility 6.3 or 5.6, TC Firmware was 7.6.3 downgraded to 7.6.1(no effect), reinstalled OS X 10.8.4, have done a factory reset of TC, TC is visible to finder and Time Machine, both work fine. Internet works fine. Wireless works fine.
    Airport Utility on  Macbook Pro with the same software sees it fine, no problems.
    Please! Any suggestions?

    Follow this link if you are having similar problems. http://www.youtube.com/watch?v=3zqkNooG1KQ
    I will update this if it also solves another problem with Time Machine backups.

  • Can I boost the DSL signal using my 1st Generation Airport Extreme or Express? Also, can I get wireless printing?

    Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
    I just moved into a house where they have ATT DSL and it is really slow in my room.  I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.  I don't think they want my Extreme as their router, though.  They are PC.
    I am also hoping that I can set up a wireless printing situation in my room using the Express or Extreme.
    I am running 10.4.11 on my old MacBook Pro laptop, 10.5.something on my old desktop (MacMini).
    Thanks for any help ahead of time,
    Carole

    Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
    I just moved into a house where they have ATT DSL and it is really slow in my room.  I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.
    Unfortunately, this won't work especially if you want the connection between the routers to be wireless. The two are just not compatible for configuring an extended network. However, it could work if you can have them interconnected by wire. In that case, you could configure them into a roaming network.
    I don't think they want my Extreme as their router, though.  They are PC.
    This shouldn't be an issue as the AirPorts support wireless clients regardless of which operating system they are running.

  • I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

    I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

    I have a 1st generation AirPort Extreme and want to create a guest network, can I?
    This version of the AirPort Extreme does not have guest network capability.
    Can I do this by adding an Airport Express?
    Why not simply buy a new Airport Express.....which does have main and guest network capability*.....and sell the AirPort Extreme?
    * The AirPort Express will need to connect to a simple modem.....not a modem/router or gateway type of device.....for the guest network feature to work correctly.

  • 1st generation airport express base station not showing up in network utilities

    when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with  my new mac?

    Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
    When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
    Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    Perform a "factory default" reset on the base station.

  • What is the ip port number for a 1st generation airport express

    I have recently upgraded my home wireless router from a Linksys EA2700 to a EA6500.  The EA2700 worked fine with my 1st generation Airport Express.  Since I have mavericks on my laptop (Airport Utility 6.x is incompatible with Airport Express/b/g) I used Airport Utility 5.6.1 on my Windows 7 laptop.  When I goto select my home wireless network in the APU drop down menu to select a network, my home wireless network never shows.
    Linksys says it might be a problem with port forwarding and they need to know the ip port number of  1st Generation Appler Express. 
    Thanks. -Rob

    AirPort Utility can be used to configure and change the settings on any of the AirPorts.
    If you have a Mac, AirPort Utility is here:
    Macintosh HD > Applications > Utiltiies > AirPort Utility
    If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

  • HT4259 How to pair a 1st generation airport base station

    I'm trying to pair a old airport express base station and extend the network and it's telling me I can't with the software I have.

    Let's make sure that you really do have a 1st Generation AirPort Express.
    Please look on the side of the Express for the Model No. It starts with an "A" folllowed by four numbers.
    A 1st Generation AirPort Express is A1264.
    Is this what you see?

  • 1st generation AirPort Express - no software

    I'm still using a 1st generation AirPort Express ... there's nothing wrong with it, it's still doing its job just as good as when it was new.
    But there's a big problem.
    The latest AirPort Utility (6.x) doesn't support this device, so I can't go in to re-configure it, even though it's still connecting everything fine.
    I can't even download the last utility that supported the device either, because it's not supported under my latest OS, which is Yosemite.
    (AirPort Utility 5.6 for Mac OS X Lion)
    Any advice, besides buying a new AirPort? It's crazy to have to buy a new basestation just because it's a few years old and the only utility on your computer can't simply talk to it.

    Why would you say that?
    Because it is correct.
    The model number is A1084, which is 1st generation
    No, it is not, according to Apple.  A 1st Generation AirPort Express is model number A1264. Apple began to use the Generation naming with the introduction of wireless "n" products in 2008.
    Hopefully, the screenshot to illustrate that will appear below, but Apple is having problems with screenshots on the forums displaying correctly. If he screenshot does not display, let us know and I will post some links for you.
    A1084 is a much older wireless "b/g" version of the Express, which was sold long before Apple began to use Generation naming on the AirPorts.
    The A1084 was introduced in June 2004 and discontinued in March 2006.
    I have AirPort Utility 6.3.4, and when I click on my A1084 base station, a message pops up that says "This version of AirPort Utility doesn't support this base station."
    Correct.  AirPort Utility 6.3.x introduced in Lion, and carried into Mountain Lion, Mavericks and now Yosemite does NOT support the older "b/g" versions of the Apple Airport routers.
    If you want to be able to administer the older 10 year old AirPort that you have, I gave you the information needed above. It is repeated again here........
    You can use, or borrow,  a Mac running Leopard (10.5.x), Snow Leopard (10.6.x) or a PC with AirPort Utility installed on the computer to administer the old AirPort Express.
    Yes, the model I have is at least 8 years old. It's about 10, but it still works perfectly fine ...
    That is great. You can still use it if you follow the instructions that I provided above.
    But, any version of AirPort Utility 6.x cannot be used to administer the A1084 version.

  • HT4587 1st generation AirPort Express - unable to set up

    I have 1st generation AirPort Express but can't set it up again after a long time of not being used because it appears the new airport software is not compatible with the original AirPort Express - can anyone help please?

    A1088 is not a 1st Gen Express "n" wireless device, so that might help explain the issue here.
    The much older version of the Express that you have cannot be administered by the newer operating systems on Macs.....Mavericks, Mountain Lion, and Lion.....which will work with the 1st Gen A1264 Express.
    If you have an older Mac running the Leopard (10.5.x) or Snow Leopard (10.6.x) operating systems, or a PC, you can use one of those computers to configure and administer the older Express model.

  • I have just requested my ipod nano 1st generation to be replaced using the scheme, i have entered the wrong postcode on the shipping of the replacement box, will it still come to my address? or how can i change it?

    I have just requested my ipod nano 1st generation to be replaced using the scheme, i have entered the wrong postcode on the shipping of the replacement box, will it still come to my address? or how can i change it?

    Call up apple care,  (08000480408 if you are in the UK) and ask them to change the postcode and request another replacement packet

  • Time to upgrade my 1st Generation Airport Extreme?

    As the title says, thinking it's time to upgrade my 1st Generation Airport Extreme (Draft 'n') to the latest 5th generation model, just to be clear my existing Extreme is the current form factor white square design and not the very earlier dome version (although I did have one of those too once upon a time).
    Here's my thinking/question, current Extreme has been a great trusty workhorse since new, reliable and generally rock solid performance, however a recent upgrade to a super fast 'Fibre To The Home' internet connection is making me think it's time for an upgrade to solve low speed/throughput issues with the current Extreme setup.
    With my current iMac networked to the wall mounted Fibre (1000 Mbps ethernet) router via Cat 5e I'm getting amazing speeds on speedtest.net (i.e 760 Mbps down and 228 Mbps up), however when wirelessly connected to the Extreme with my iPhone 4S and MacBook (Black) I get the following speedtest.net results:
    iPhone 4S: 17 Mbps down and 34 Mbps up
    Macbook: 24 Mbps down and 63 Mbps up
    (Interesting that the uploads seem to have better connection/throughput than the downloads, normally the opposite applies?)
    I understand that the current Extreme is somewhat crippled as it features 100 Mbps Ethernet ports (latest models have 1000 Mbps), however the wireless speeds still seem way below what I would expect (i.e. nearer 100 Mbps), both the 4S and Macbook are within feet of the Extreme.
    The Extreme is set to 'n' only 2.4 Ghz, bridge mode (letting the wall mounted Fibre router do all the routing/DHCP work) via Ethernet Cat5 from one of the 4 Ethernet ports on the wall mounted Fibre router to the Extreme WAN port, tried various channels, 1, 6 and 11. Current Firmware 7.6.1 on the extreme. I have also disabled the wireless connection/network on the Fibre router to avoid any possible interference with the Airport network.
    So my main question is, should I look to upgrade to the latest Extreme model, will this improve the wireless speeds, based on my setup what wireless speeds could/should I expect with a new Extreme, or am I missing/overlooking something within the current setup?
    Thanks in advance.

    Thanks John, this certainly helped.
    Speedtest.net results:
    2.5 Ghz n: 19 Mbps down and 53 Mbps up
    5.0 Ghz n: 28 Mbps down and 58 Mbps up
    It also came to light that I wasn't using the best of the speedtest.net servers to do my testing, by accident I selected a different one (Newbury UK - Vodafone) to the one I had been using (Milton Keynes UK) and the Newbury server indicated download speeds of around 50 Mbps, which I feel much happier with.
    Seriously considering a new Extreme for the simultaneous 'n' networks, 1000 Mbps ports and no doubt improved components, antenna etc.
    Will report back if/when set up.
    Thanks again.

  • Hi, I have imac mac os 10.6.7, I can't access to internet with my ipod  touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

    Hi,
    I have imac mac os 10.6.7, I can't access to internet with my ipod  touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

    right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

  • Where can i buy a 1st generation ipod in the uk?

    where can i buy a 1st generation ipod in the uk?

    Which model?  Have you checked Amazon, any local dealers, or pawn shops?
    B-rock

  • HT1386 how can I unlock a 1st generation Ipod touch?

    how can i unlock a 1st generation ipod touch that i forgot the password to??

    Connect the iPod to your conmputer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
    http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

Maybe you are looking for