I can't access my neighborhood wi-fi today with my iMac and the new Firefox 4.0.1. I am able to access the wi-fi with my MacBook which still has Firefox 3.6.16. What is the problem?
I also wrote an e-mail on MobileMe and when I sent it I received a Firefox blocking a pop-up on that e-mail, something I have never seen before. Then, I discovered that the contacts I addressed that e-mail to were not the current e-mail addresses. The current e-mail addresses had "disappeared" from my MobileMe contacts! I had a live chat with MobileMe about it, and they are looking into it and getting back with me.
No,no one can help.
When your girlfriend opened the Library with iPhoto v7 it was upgraded to the v7 format. V6 cannot read that format. She was warned about this when she opened the Library.
So, your options are as follows:
Upgrade your v6 to v7
Restore a v6 Library from Back Up
Recover your photos from the v7 library and start over from scratch.
That's it.
Regards
TD
Similar Messages
-
My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?
We want you to enjoy the best reliability with your Droid 2 Jaxie! What specific problems are you having with the device? Is your software up to date? The latest version available is: 4.5.621.A955.Verizon.en.US. If the software is up to date, we recommend running the device in safe mode to determine if third party apps may be causing the issues. I hope this information is helpful.
http://bit.ly/IPw5jE
http://bit.ly/o5McAQ
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
I have never had to enter a password to access mail.
However, recently, I keep being asked for password on my ***** address.
Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
But when I attempt to use that pw I still can't get in.
I have no trouble accessing that email account on my mac mini. Just on the macbook.
<Edited by Host>Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things. -
I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?
If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps. -
Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7b8f0
Exception Code: 80000003
Exception Offset: 0003381b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
can anybody help me?Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences
can I interrupt a migration from Mac Book Pro to iMac and what are the consequences
Les:
Here are some options:
• You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
• You can use an application like Log Me In to access your home computer from your laptop.
• You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
Please do post back with further questions or comments.
cornelius -
A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?
Sorry I do not know what the problem may be. <br />
If no-one comes up with better ideas of what causes this then my questions and suggestions:
What do you mean by an infinite loop ? <br />
The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
* did you disable all plugins - and did you still get the problem then ?
As you mention disabling javascript stops the problem, have you tried with<br /> Java script enabled but
* block popups ON
* load images automatically OFF
* advanced options - ALL OFF<br /> What happens do you get the problem then or not.
While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ? -
I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues
Welcome to the Apple Community.
Try pulling all the cables for a few moments and trying again. -
just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally. What I'm need to do so? Thank You.
Since you are covered by warranty, I would take it to your nearest Apple store immediately. There might be a problem with the RAM. And, you have 14 days to return the machine, so if it is not an easy fix, you might want to consider returning it for another machine.
-
I have Elements 12. It's an upgrade in most respects from the old CS2 I used for years. Except there is apparently no measuring tool. How can this be; is there a plug-in, or will Adobe fix the problem? Anyone know a way around this glaring omission?
Hello again. When I said PSE 12 was an upgrade on CS2, I meant that simply from an informal point of view - and it is: it's better software in most respects. In expert mode, the features and functions are much the same as in the CS2 I had before, but enhanced and slicker. Less 16 bit colour depth and a few other things of course. Unfortunately, as it now transpires, the "few other things" has turned out to include the measuring feature.
Thanks for the work-around - only problem is ... to what Info Panel are you referring when using the line tool? I've looked around but can't see the line length being shown anywhere. Thanks in advance for any light you might be able to cast on it.
Incidentally, I upgraded my written-off Canon D5 MK II with a D6. To me it's an upgrade - it's a much better camera - though by the letter of the law, the strict upgrade path would be to a 5D MK III. One can use the word "upgrade" in this informal (but entirely meaningful) sense, I hope, without being sent to prison!! -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet? -
Hi I have iPhone 4 with iOS 6 and a week ago I stop ressiv or send SMS. I tried everything but I still can't send.. I erase the version and all the data on the iPhone and now I can send SMS. But when I'm downloading my buck up the problem happened again
Please help me cuse I don't know what to do and my cellular company don't have an answer
Thank uI have to ad that its not an easy problem I did all the action in the book.
It's something with my back up -
i have ipod nano wont works after i changing its and the problem is i cant remember when i got its or if its out of warranty, what should i do??
If the card has been redeemed onto your account then you shouldn't need to re-enter it - I've never had to re-enter any of mine, and once a card has been redeemed it effectively becomes zero, it's value should be added to your balance. What is happening when you try to buy the song ?
-
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
I am at 10.7, lion. I am trying to update xcode from 4.1 to 4.2. app store says I have an UPDATE available. when i click on it, it says the message in the thread topic. I have tried 1) , signing out of app store, ending itunes, re-sign-in 2) reboo
-
Lost contacts in sync modified where are they now?....
hi all, i went to sync my phone and was promted that itunes would modify a certain number of my contacts and i accidently hit yes. when i went to my phone several of my contacts are not there. can someone tell me how to reverse that process and how t
-
Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)
-
Sorting an array of objects and returning another variable
Hi there, Bit stuck on this one I wonder if anyone can help.. I have an object array into which I've pushed a number of objects with different variables :- myArray.push({myRef: 1, myValue: "W"}); I can sort the array in numerical order using :- myArr
-
Installation of Oracle Client 10.2.0.1 on Windows Vista Business
I get the error "cannot initiate oci.dll" can anybody help? yours Andreas Umlauft