I can't access my Numbers documents now that I have 10.9.3. It says I have to buy and upgrade. Anyone else have this problem?
I can't access my Numbers documents now that I have OS Mavericks 10.9.3. It says I need to buy an upgrade for 19.99 to access them. Anyone else have this problem?
If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
If you clean installed, look for your old install disks for iWork and reinstall.
They will run on Mavericks but they need to be there.
Similar Messages
-
I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program?
I'd start with the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
What do I do if I can't upload photos into my photobook? Every time that I try, the upload starts but then stops. Then the only options I have are to cancel or retry. Has anyone else had this problem and how have they solved it?
I solved the problem. Had nothing to do with Mac or iphoto. Problem must be my the internet connection to my provider.
Upload at my office worked without any problem. One problem solved, now i am aware with a lot of discussions with my providers helpdesk ;-) -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.
See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
tt2 -
I just installed Adobe InDesign CC 2014 and now I can't scale objects/type using Command+Shift Key. Has anyone else had this problem and if so, any solution?
There is a conflict with third party software or your system keyboard shortcuts. Lately, there have been many postings about conflicts with Chrome extensions so check there first.
It's not a new problem. I wrote about it on InDesignSecrets.com in 2006:
The Missing Keystrokes Mystery | InDesignSecrets -
After I have updated my iPhone5 to IOS8 I can no longer access my greetings. I can't change the greeting or listen. Anyone else having this problem?
See:
https://discussions.apple.com/thread/4350553?start=15&tstart=0
Solution: downgrade to version: 5.0.2 -
Whenever I ask Siri to send a message to a contact, it will attempt to send it as an iMessage. This is a problem because it will attempt to send iMessages to contacts of mine which aren't even iPhone numbers. Is anyone else having this problem?
So, this is a problem because when Siri attempts to send iMessages to those without iPhones it, of course, fails.
For example, if I say to Siri, "Tell my mother 'Hello.'" It will try to send an iMessage. My mother has an Android phone, so the iMessage just gets lost in cyberspace.
I use Siri quite often, this problem only occured about two hours ago.
Can anyone help me with this?
Thanks.
ThomasI had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
I have a late 2011 OS X Lion 10.7.4 that is only 6 months old. For the first 4 months I had no problems, but then about 6 weeks ago I downloaded an Angry Birds update from the Apple App Store, and my problems began. When playing Angry Birds the the new Angry Birds update for the first time the cursor began to jump around, moving on it's own as if someone else was controlling it. After a few moments I became obvious I could not control the cursor with the trackpad. When I placed the tip of my finger gently in the center of the trackpad to try to hold the cursor still it becan switching from the game (desktop) to launchpad and mission control. I then put the computer down so I was not even touching it, walked several feet away and the cursor still moved on it's own.
I've done a lot of research over the last few weeks on related articles and realized this is a common problem with numerous different causes: PRAM settings,
screen sharing, remote settings, having fingers accidently touch edges of trackpad, writst resting too close to trackpad, swollen battery, etc. and I don't think it's due to any of those issues.
The problem came out of nowhere. My computer stays at home, and is not used by anyone else. At first it was just Angry Birds, but now it can happen at any time. Sometimes hours or days go by when this does not happen, sometimes it happens so much I can't use the computer at all. It can get so bad that I won't be able to click out of whatever I'm doing on my desktop, and I'll have to shut it down by holding the power button.
Has anyone else had this issue after updating Angry Birds?try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore
-
I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings" -
I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?
A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
I am still having problems accessing java script sites. Anyone else having this problem?
I am still having problems accessing java script sites. Anyone else having this problem?
Javascript can be left on, but Java (which is something very different) should generally be turned off.
Apple barred Java from running on Macs, leaving companies that rely on Java plug-ins out in the cold.
Apple blocked Java 7 Update 11 by adding it to the banned list in XProtect.
This was the second time in two weeks that Apple has blocked Oracle's code from running on Macs. This time Java is blocked through Apple's XProtect anti-malware feature.
Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
Macs running OS X Snow Leopard and beyond are affected.
UPDATE for those running Lion or Mountain Lion:
Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
Update foror Snow Leopard users:
Apple have issued update 12 for Java for OS 10.6:
http://support.apple.com/kb/DL1573
Note: On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate. -
When I open iCloud now (Running OS 10/7/5 Lion) I can read the body of an email message but all my headings and other text are totally scrambled in strange characters, etc. Has anyone else had this problem and is there a known fix other than a complete re-install?
Apple is aware of the issue and is expected to release 7.0.3 next week to address iMessage issues.
In the meantime I have found that a good old fashion reset cures it for a while. -
Since I downloaded Lion I can't sign on to Facetime. I get an error message telling me my Apple ID is already in use. Has anyone else had this problem?
Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software. -
Firefox is crashing every time I have my MSN email account up. (Since I use it for business, that's many times per day.) It seems to coincide with hotmail's latest update where the email is checked and downloaded to the inbox automatically. Then when it asks me if I want to send the crash report to Firefox, I select yes and it tells me it had trouble sending the report. Is anyone else having this problem? Is there a setting I can change? I can't seem to keep my email account up for more than 10 minutes.
p.s if you're reading this Microsoft, it's still not bad enough to make me to go back to Internet Explorer!Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn
Maybe you are looking for
-
I installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active
i installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active
-
Epson printers keep giving "media not loaded correctly" error message
When sending print jobs that consist of multiple copies to Epson printers from my dual 3 GHz Quad-Core Intel Xeon Mac with OS 10.5.8, the printer will frequently (more than half the time) grab a sheet of paper and spit it out with nothing on it, and
-
Error in multiple operation with change document object for custom table
hi all, I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am g
-
Problem after deinstallation of JDK during SAP System running....
Hello... I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System. Actually an SAP System was already running on the my system and suddenly i required to work on eclips (an IDE for java). And to instal
-
Can we override Exception Class in Java ?
I have done a project in structs 1.2 . I have used String variable without checking for null. so I get a null pointer exception. String str = null; str.equals("jayaraj"); //exception raised can i make a customized null pointer exception ?