I can't access router address. "404 not found"

With my Linksys cable modem and wireless router hooked up and running properly, I can't access the router address. I get "File 404 not found" and "The requested URL was not found on this server. " It is the same address as in the Network Preferences window. The wireless router works great and all computers in the network have fast internet access but my boys want to "tweak" the port settings on the router and can't get to them. I've tried resetting the router every way possible but to no avail so I'm wondering if I don't have something
set properly on the network page of OSX. Any help would be appreciated.
Mac-Mini Mac OS X (10.4.4) 1 GB Mem, Pioneer DVR Dual Layer

Okay, sometimes routers go weird...so, unplug the router for at least a minute, then plug it back in. When it finishes the startup sequence, try logging in again.
If you ever do get in, there is a firmware update available for your router. The firmware might be corrupted (happens a lot).
http://www.linksys.com/servlet/Satellite?c=LCASupportC2&childpagename=US%2FLayout&cid=1166859837401&packedargs=sku%3DWRT54G&pagename= Linksys%2FCommon%2FVisitorWrapper&displaypage=download#versiondetail

Similar Messages

Simple OC4J Problem. Can't open localhost error: 404 Not Found

Hi, I am a new to Oracle Application developmen. I just installed Application server 10g R1 [ as where i am doing an internship they are using this version]. I have installed OC4J as guided in installation guide. But when it comes to testing the oc4j server, as they ask to test it by this url: http://localhost:8888/ .. On chrome it gives an error: 404 Not Found Resource / not found on this server and on internet explorer it gives: The page cannot be displayed.
Your response will be highly appreciated. Thankyou

Instead of redirect add the default suffix in web.xml.
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.jsf</param-value>
</context-param>

Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

I can go to every other website except for facebook even if i use other browsers all i can see is 404 Not found or HTTP 500 Error since yesterday I tried reinstalling clearing history and cookies enabling them make sure that my firewall permits me to acce

I can go to every other website except for facebook. I try every other browser in my computer but the only thing I can see is HTTP 500 error and 404 Not Found. I tried clearing cache history and cookies, enabling cookies, checking my modem, make sure my firewall permits me to access this web and even pt 's' in front of 'http' but it still dosent work. I can go to facebook with my dad's laptop and my handphone but not with this computer, why?
== URL of affected sites ==
http://www.facebook.com

Problem Resolved!
          I found out that I had 'http' instead of 'httpd' in the statement where I
          registered my servlet, SqlServlet.
          Now, I am having difficulty with hot deployment. The server is returning
          error 404.

Web services Access Error: 404 -- Not Found

I'm going through the web service example on the help menu. The vi is built exactly as required and the deployment works. Labview is running and the vi is open, but when i start up firefox and go to the url, i get the error "Access Error: 404 -- Not Found". Any ideas? Thanks.

Hi Pojoaque,
Thanks for the update. Which example is called add?
Maybe its the address book example, if so, please see this KnowledgeBase article with a known issue with this example - also please double check your configuration of LabVIEW.
In the VIs you create yourself what are you trying to do?
Why Does the Address Book RESTful Web Service Project Found in the LabVIEW 8.6 Example Finder Not Work?
http://digital.ni.com/public.nsf/allkb/A8830F04188D2835862574AA0059055E?OpenDocument
If its the VI itself which does work - have you checked your LabVIEW configuration allows access to the webserver for all vis?
Hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

HTTP 404 Not Found while accessing Human Resource Intelligence functions

Hi,
Can anyone help me in resolving
HTTP 404 Not Found while accessing Human Resource Intelligence functions
error
Instance : R12
Thanks

Hi,
Apache log file is not showing any errors.What log files have you checked? Please check error_log and access_log files, you should find more details about the error in these logs.
Thanks,
Hussein

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

Error 404--Not Found while accessing web app through Weblogic 6.1

Hi everybody,
          I am new to Weblogic and recently installed Weblogic6.1
          on my machine and I am trying to access my application using weblogic
          and it gives
          Error 404--Not Found
          From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          10.4.5 404 Not Found
          I have uploaded the WAR file of my application using the Admin
          console. The WAR file is place under
          \bea\wlserver6.1\config\mydomain\applications\screen.war.
          What am I doing wrong ?
          Thanks is advance.
          PS: I am also including my web.xml file
          <?xml version="1.0" encoding="ISO-8859-1"?>
          <!DOCTYPE web-app
          PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
          "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          <web-app>
          <session-config>
          <session-timeout>-1</session-timeout>
          </session-config>
          
          <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          <init-param>
          <param-name>application</param-name>
          <param-value>resources.nmr.ApplicationResources</param-value>
          </init-param>
          <init-param>
          <param-name>config</param-name>
          <param-value>/WEB-INF/struts-config.xml</param-value>
          </init-param>
          <init-param>
          <param-name>debug</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>detail</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>validate</param-name>
          <param-value>true</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
          </servlet>
          
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          
          <servlet>
          <servlet-name>pdf</servlet-name>
          <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
          </servlet>
          
          <servlet-mapping>
          <servlet-name>pdf</servlet-name>
          <url-pattern>/pdf</url-pattern>
          </servlet-mapping>
          
          <mime-mapping>
          <extension>mol</extension>
          <mime-type>chemical/x-mdl-molfile</mime-type>
          </mime-mapping>
          
          <welcome-file-list>
          <welcome-file>index.jsp</welcome-file>
          </welcome-file-list>
          
          <taglib>
          <taglib-uri>/WEB-INF/app.tld</taglib-uri>
          <taglib-location>/WEB-INF/app.tld</taglib-location>
          </taglib>
          
          <taglib>
          <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
          <taglib-location>/WEB-INF/nmr.tld</taglib-location>
          </taglib>
          </web-app>


hmm
          it all looks ok to me
          what happens if you try to access an image or something in your war (ie
          something not java related)
          also - i have seen on some machines that localhost doesnt work but 127.0.0.1
          does work
          your app should be trying to access index.jsp which should be in the root
          directory of your war
          does index.jsp exist and is it in the root directory of your war?
          lastly - i noticed you have a startup servlet. Put a system.out in the init
          method of the servlet. If the servlet is being deployed OK then you should
          see some output in the console
          "Ravi" <[email protected]> wrote in message
          news:[email protected]...
          > I am specifying the same http://localhost:7001/screen and it still
          > gives the same error.
          >
          > Following is part of my cofig.xml where myapp is specified.
          >
          > <CustomRealm
          >
          ConfigurationData="user.filter=(&(cn=%u)(objectclass=person));user.dn=ou
          =people,
          > o=example.com;server.principal=cn=admin,
          >
          o=example.com;membership.filter=(&(member=%M)(objectclass=groupofuniquen
          ames));group.filter=(&(cn=%g)(objectclass=groupofuniquenames));server.ho
          st=ldapserver.example.com;server.ssl=true;group.dn=ou=groups,
          > o=example.com"
          > Name="defaultLDAPRealmForNovellDirectoryServices"
          > Notes="This is provided as an example. Before enabling this
          > Realm, you must edit the configuration parameters as appropriate for
          > your environment."
          > Password="{3DES}/4XkW5rmVvBHzFtI9SRK/g=="
          > RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
          > <Server ListenPort="7001" Name="myserver" NativeIOEnabled="true"
          > TransactionLogFilePrefix="config/mydomain/logs/">
          > <Log FileName="config/mydomain/logs/weblogic.log"
          > Name="myserver"/>
          > <SSL Enabled="true" ListenPort="7002" Name="myserver"
          > ServerCertificateChainFileName="config/mydomain/ca.pem"
          > ServerCertificateFileName="config/mydomain/democert.pem"
          > ServerKeyFileName="config/mydomain/demokey.pem"/>
          > <WebServer DefaultWebApp="DefaultWebApp"
          > LogFileName="./config/mydomain/logs/access.log"
          > LoggingEnabled="true" Name="myserver"/>
          > <ServerDebug Name="myserver"/>
          > <ExecuteQueue Name="default"/>
          > <KernelDebug Name="myserver"/>
          > <ServerStart Name="myserver"/>
          > </Server>
          > <Application Deployed="true" Name="screen"
          > Path=".\config\mydomain\applications">
          > <WebAppComponent Name="screen" Targets="myserver"
          > URI="screen.war"/>
          > </Application>
          > <SNMPAgent Name="mydomain"/>
          > <Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/>
          > <ApplicationManager Name="mydomain"/>
          > <JTA Name="mydomain"/>
          >
          > Thanks in advance.
          > Ravi.
          >
          >
          > "Matt Krevs" <[email protected]> wrote in message
          news:<[email protected]>...
          > > what url are you specifying?
          > >
          > > i would guess that http://localhost/screen-web would work. Hard to say
          > > without also seeing your config.xml
          > >
          > > The critical item in config.xml is the value of URI in the
          webappcomponent
          > > element for your application
          > >
          > > eg if it was
          > >
          > > <WebAppComponent Name="myapp-web" Targets="myerver" URI="myapp-web"/>
          > >
          > > then the url you would call is http://localhost/myapp-web
          > >
          > > "Ravi" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > Hi everybody,
          > > > I am new to Weblogic and recently installed Weblogic6.1
          > > > on my machine and I am trying to access my application using weblogic
          > > > and it gives
          > > >
          > > > Error 404--Not Found
          > > > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          > > > 10.4.5 404 Not Found
          > > >
          > > > I have uploaded the WAR file of my application using the Admin
          > > > console. The WAR file is place under
          > > > \bea\wlserver6.1\config\mydomain\applications\screen.war.
          > > >
          > > > What am I doing wrong ?
          > > >
          > > > Thanks is advance.
          > > >
          > > > PS: I am also including my web.xml file
          > > >
          > > > <?xml version="1.0" encoding="ISO-8859-1"?>
          > > >
          > > > <!DOCTYPE web-app
          > > > PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
          > > > "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          > > >
          > > > <web-app>
          > > >
          > > > <session-config>
          > > > <session-timeout>-1</session-timeout>
          > > > </session-config>
          > > >
          > > > 
          > > > <servlet>
          > > > <servlet-name>action</servlet-name>
          > > >
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          > > > <init-param>
          > > > <param-name>application</param-name>
          > > > <param-value>resources.nmr.ApplicationResources</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>config</param-name>
          > > > <param-value>/WEB-INF/struts-config.xml</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>debug</param-name>
          > > > <param-value>2</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>detail</param-name>
          > > > <param-value>2</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>validate</param-name>
          > > > <param-value>true</param-value>
          > > > </init-param>
          > > > <load-on-startup>2</load-on-startup>
          > > >
          > > > </servlet>
          > > >
          > > > 
          > > > <servlet-mapping>
          > > > <servlet-name>action</servlet-name>
          > > > <url-pattern>*.do</url-pattern>
          > > > </servlet-mapping>
          > > >
          > > > 
          > > > <servlet>
          > > > <servlet-name>pdf</servlet-name>
          > > >
          <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
          > > > </servlet>
          > > >
          > > >
          > > > 
          > > > <servlet-mapping>
          > > > <servlet-name>pdf</servlet-name>
          > > > <url-pattern>/pdf</url-pattern>
          > > > </servlet-mapping>
          > > >
          > > > 
          > > > <mime-mapping>
          > > > <extension>mol</extension>
          > > > <mime-type>chemical/x-mdl-molfile</mime-type>
          > > > </mime-mapping>
          > > >
          > > >
          > > > 
          > > > <welcome-file-list>
          > > > <welcome-file>index.jsp</welcome-file>
          > > > </welcome-file-list>
          > > >
          > > > 
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/app.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/app.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > 
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/nmr.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > </web-app>

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

Error 404 -- Not Found while accessing weblogic console

Hi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
Pratap

Hi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
Pratap

I can sign in but can't get mailbox 404 not found

my homepage is yahoo,i sign in it shows HI SIROOS, now i will go to mailbox , it shows 404 not found, we can find URL

Lorraicun wrote:
Tamim wrote:
What is the version of Skype program you are on now?
In Skype, Click Help >> About Skype
Please re-install latest Skype desktop client and join it.
http://www.skype.com/go/getskype-msi
It seems to me that so many people have this problem and you don't seem to be helping them
What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit?
http://support.microsoft.com/kb/827218
What is the version of Skype program installed on your computer? In Skype go to Help -> About Skype.

Getting error "Http 404 not found" while accessing CUCM GUI..

Hi,
Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
Please find attached screenshot for ur referance.
Thanks & R's
Harish

Hi Aaron,
I have restarted dat service bt still the issue is persisting.
Now its showing attached error.
Thanks and R's
Harish

When using Firefox &Juno Webmail, I can't access my address book

When I go to Juno webmail using Firefox as my browser, I can't access the address book. With other browsers, as an example, after opening an E-mail, I can click on "Forward", then click on "To", and my address book will open. This doesn't work when Firefox is the browser.
== URL of affected sites ==
http://webmaila.juno.com/webmail/new/7?session_redirect=true&count=1279912480&ajaxSupported=1
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Hello and welcme to the frums
Try removing the battery and replacing it - allowing the phone to reboot
Nurse-Berry
Follow NurseBerry08 on Twitter

The address bar where I can type in internet addresses is not showing on my Mozilla, please help me with this.....how do I enable it?

The address bar where I can type in internet addresses is not showing on my Mozilla, please help me with this.....how do I enable it?

Thanks friends, I got it resolved at last.............kdwis

When trying to follow a link in a email, I get "404 NOT FOUND" this is a ligit address...any ideas?

When I click on a link received by email to complete registration and activate my membership to a Harley forum, I get "404 NOT FOUND" Not Found
The requested URL /register.php was not found on this server.
Any ideas what might account for my inability to reach this site? This sort of thing doesn't happen often. Any help or suggestions would be appreciated. Thank you, Paul (debreeze)

I'm not sure why you believe that I'm running an outdated version of firefox but according to my files I'm running product version 3.6.12. In the support notification I received questioning the file version running on my computer, the link I had a problem with http://www.harleyhowto.com/forum/register.php\ was also included. When I clicked on the link I went directly to the site with no problem. Then I opened the original email containing the same link, clicked and went to 404 NOT FOUND ! I'm going back to the web site and go through the registration process again and keep my fingers crossed hopping it works when they send a new verification email . I will post the outcome, either pos. or neg and may be asking for further help. Thanks, debreeze

I can't access router address. "404 not found"

Similar Messages

Maybe you are looking for