I can't accessed system recovery options after the repairing process was interrupte​d.

although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies  but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says: 
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus disk defragmentation  or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical in formation:
*** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
I hope this problem will be solved as much as possible.  thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

Hello and welcome,
Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site.  There is some Lenovo presence, but  if you need urgent support, please try your local support office:
Philippines
THINK-branded products
Tagalog, English
1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • I can't access folio builder even after the download of digital publishing suite....

    Hi! I've downloaded the Folio Producer Tools for InDesign CS5.5 (I accessed it through the folio builder panel) but the panel still asks me to download it and I'm sure I've been throw the whole process... what did I miss???
    Thanks

    You need to install both the Folio Producer tools and the Folio Builder panel. They're separate installers.
    http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  • HT201364 I am not able to download OS X Mavericks after the download process was aborted by loss of internet connectivity momentarily.

    I tried to download OS X Mavericks from the APPS store abd it was downloading ok. But after 3.4 GB of data transfer, internet connectivity was lost with message "an error has occurred". Tried to again initiate the download but now downloading is not taking place and I am getting continous error of "an error has occured". Please give procedure to resolve this issue. My current OS is Mountain Lion (10.7.5).

    edubarroso wrote:
    How to download from a test user?
    Please start your own thread for individual attention.
    Explain your problem and indentify which Mac you have and which version of OS X it is using.

  • ThinkPad Edge unable to use System Recovery Options

    I am helping a friend with a laptop problem. The HDD has had problems in the past and already been restored once. Now it won't boot and I'm unable to access the f8 boot options in order to use Safe Mode. I was able to boot using Kaspersky, but it doesn't show the whole HDD and files.
    I've given up trying to access files and just want to try to get the PC working again. I tried using the System Recovery Options and doing a restore, but after it launches I get a message that says "You must log in in order to access System Recovery Options."
    Any suggestions? Thanks!

    Good day and welcome to the community.
    It may help others provide advice with a bit more information about the system you're working on. TP Edge model, windows version, etc.
    Cheers.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • System Recovery Options in Windows 7 (MBP and Parallels)

    I realize it is probably debatable (perhaps at best) if this belongs here but I have borked my Windows 7 installation on my MacBookPro running Snow Leopard and I now see this after opening Parallels and either starting or shutting down the virtual machine:
    http://dl.dropbox.com/u/15285654/Screen%20shot%202011-11-25%20at%2011.13.16%20AM .png
    I am trying to follow some system recovery recommendations and I can't quite figure out if I need to hold down "Fn + F8" upon a Restart of the Virtual Machine - or if I should put the install Disk in and then somehow /boot/ to the CD Rom or what:
    http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7
    If anyone has any advice I'd love to fix this problem without a full re-install of Win 7.
    Thanks.

    Thanks - but I can't seem to install it! Even in compatibility mode. I get an error box telling me to check nothing else is running (...), and a message saying it has encountered error code -6003.
    Could this have something to do with me running Windows 7 x64?
    Thank you...

  • Can't access Color Management options for HP 6700 under Mac OS 10.8.5 (Mountain Lion)

    Hello.
    I've got the HP Officejet 6700 Premium e-All-in-One and I can't find any way to access Color Management options.
    The printer is attached (Wi-Fi) to my iMac running Mac OS 10.8.5 (Mountain Lion).
    I want to correct a magenta cast to photographs that I've printed.  I've had the magenta-cast problem under Lightroom and using Preview to print the photographs, so now I want to work with color profiles in Photoshop Elements.
    Photoshop Elements recommends that I "disable color management in the printer preferences dialog".
    However, I'm not able to find color management preferences for the 6700 in any of the settings under Mountain Lion:
    Not under (Apple) > System Preferences > Print & Scan.
    Not under (HP Utility) > Open Embedded Web Server.
    Not under (HP Utility) > Printer Settings.
    Not under Preview's print dialog.
    Nor can I find any clear direction in the online help (at HP or elsewhere) that I've read so far.
    Any suggestions would be most appreciated.
    Thank you!
    Michael
    This question was solved.
    View Solution.

    Please note that in the Print dialog I get "Color Matching" not "Color Management."
    Still, I am (at this point) able to control color from Photoshop Elements, so that's good enough to proceed.
    Thanks again.

  • My 27" iMac has just creen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB keyboard

    My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke

    Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
    I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare.

  • Re: Equium L40-14l - System recovery option missing

    Hi All
    I have a Equium l40 14l that I've finally decided needs to be restored to " out of the box " status.
    I can boot to the system recovery option page but the widely mentioned HDD recovery option has been replaced by Restoring the Complete Windows Operating System option.
    When I select that all it does is tell me that if preinstalled files are damaged you can use the product recovery dvd-rom. All I can do is click OK and return to the previous screen.
    I've run some partitioning software and the hidden partition shows up there. I didn't get a recovery disc with the machine as it had the hidden restore partition.
    I didn't make a back up when I first booted the machine. I'm thinking now that it would have been a good idea but as I thought I had the hidden partition to rely on I didn't bother.
    Any ideas if there's a way I can get the system recovery to show the option for HDD recovery?
    Thanks in advance Tom

    Guess what I found?
    A product recovery disc. I've re-installed and am now in the process of removing all the junk that comes with it.
    Happy days :-)
    Cheers Tom

  • System recovery options loop

    This morning my wife's Satellite 100 running Windows Vista got itself into a System Recovery loop with absolutely no discernible way of getting out of it. So I'm turning to you guys to see if any one has had the same problem.
    First the system shut down (battery problem). She restarted it and on loading Vista got a message box with the heading "System Recovery Options", just an OK button and the message "This program cannot be loaded click OK to restart" or something to that effect. Doing anything switches the machine off.
    I tried F8 on start up and all the options in the recovery menu (including the Repair System tools) restart Vista and arrive at the same message.
    I've searched Toshiba's support site and found nothing.
    I have a recovery disk but that would reformat the hard disk and she has lots of stuff not backed up.
    I suspect that it is going into Recovery Mode and finding a disk error on the "hidden partition". So I just want to stop it doing that so that I can start the machine and backup the files. Any ideas?

    Hi buddy,
    Can you start Windows in safe mode?
    I think in worst case its necessary to reinstall Windows if it doesnt start anymore. I mean there is nothing what you can do
    Im wondering that you didnt make a backup of these important files Anyway, you can backup them if you put the HDD in an external HDD case. Then you can connect it to another computer and make a backup before reinstalling Windows.

  • Can't access i tunes store after downloading ios7 on i phone 5

    can't access i tunes store after downloading ios 7.0.1

    I think that you will find your answer amongst the other "problem reports" for Safari 5.1 and iTunes 10.4. If you can use your Time Machine to revert to the day before you installed iTunes 10.4 (and Safari 5.1 - if you updated Safari too) you should wait for answers to other's complaints. There is a little known maxim at Mac; don't update an app or the operating system until you find no further problems reported at MacFixit, finetunedmac and Apple's own Support forums.

  • How do I delete c:\system recovery files after I have recovered my laptop?

    Recovery completed now want to remove 13 GB file C:\System Recovery Files from the laptop.  I either get error message access denied or permission required.  I am the owner, administrator, user for this file.  Please help me get rid of it asap.  Thanks in advance for your help.

    Hi,
    There are few options but please try the following method for C:\Windows.old folder:
       http://www.kodyaz.com/articles/delete-windows-old-removal.aspx
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can only access emails through OWA after migration from exchange 2007 to 2013

    can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
    needed RCA ... plz help..

    Hi,
    From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
    In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?

    Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?  I'm using Andriod version 4.4.2 with kernal 3.4.0.

        @MaloneTP
    Thanks for keeping me updated!  Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air?  Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY.  Keep me posted.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • After trying to change permissions on my computer so others on my network can access files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal

    After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.

    There is suddenly a lock icon on my external backup drive!
    Custom Permissions

Maybe you are looking for