I can't activate the table... because Namespace /ICMPAC00/ does not exist !

Hi guru,
I'm doing upgrade from R3 4.7 to ECC6.0. I have to correct an error in Phase ACT_700 phase
This is the error :
4 EDT013 Table "/ICMPAC00/P_T050" was not activated
I tried to correct the errore by activating manually the table trought SE11 in the shadow instance,
if I try to edit the table this error appears:
Namespace /ICMPAC00/ does not exist
Message no. TO123
Diagnosis
Object DEVC /ICMPAC00/PROVV is in namespace /ICMPAC00/. However, this namespace does not exist in your SAP system.
Objects from the namespace /ICMPAC00/ can only be edited if the namespace is in the namespace tables.
System Response
Editing is terminated.
Procedure
Choose an object name that is not assigned to the namespace /ICMPAC00/ (this means that it cannot begin with /ICMPAC00/).
For a list of the namespace prefixes in the SAP system, go to the Transport Organizer tools (Transaction SE03) and choose -> Objects -> Namespace Information System -> Select namespace.
I can't correct the error , because I can't modify the table !
Any idea to solve the problem ?
Thank's , Antonio Voce.

Question : it is not sufficent to create namespace ?
The table are not active in data dictionary, it means that are unusable...
I think that it is sufficent to create the namespace.
Do you know how to correct the errore mentioned in the first post :
Objects from the namespace /ICMPAC00/ can only be edited if the namespace is in the namespace tables.
If I correct this error I can activate the table and the upgrade can go on.
Thank's.

Similar Messages

How can i activate the table YGRBW_CS_UNITS

hi frnds
how can i activate the table YGRBW_CS_UNITS and its fields

hi friend,
if you mean the table structure
SE11 type in YGRBW_CS_UNITS
click activate
hope this helps.

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear. How can I save the new password if popup does not appear?

When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
How can I save the new password if popup does not appear?

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

How can i disable the 'top sites' cleaning history does not remove this and it is confusing and a risk to privacy

How can i disable the 'top sites' cleaning history does not remove this and it is confusing and a risk to privacy.
It also serves no purpose as sites i want to keep are bookmarked
Is there an alternatively an addon for this

Hi there - nope, this doesnt work either. the options available when I tap and hol are only OPEN IN NEW TAB, SHARE, ADD TO HOME SCREEN
wayne

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

Table T169F: entry MRDC does not exist

Hello Everyone,
The issue i am facing is when ERS is done through MRRL, it shows that "Table "T169F: entry MRDC does not exist" for planned delivery cost & i am not getting the accounting entries for the Margin conditions which i am getting in the Billing Document when the material is being send through the other plant through STO.
Can anyone please suggest what needs to be done?
Thanks
Anupam

Hi,
Check this thread , hope it helps.
Planned Delivery Cost - MRDC

The material 332-369090-00 does not exist or not activated

Hi Experts,
Kindly Look at into this error which I am facing in the PRD system.
Materials listed below doesn't exist (or) not activated in the Source system.
1. The material 332-369090-00 does not exist or not activated
2. The material 410-051003 does not exist or not activated
2LIS_02_SCL-Purchasing Data (Schedule Line Level) -
This data source is going to the below data targets.
1. Purchasing Data - ZPUR_C01
2. Purchasing Groups - ZPUR_C04
3. Backlogged Purchase Order Schedule Lines ZPUR_C10
Like this no of materials available in BWPRD but not available in R/3 PRD source system .so how to delete specific master data records for material
Regards
Pinky
Edited by: pinky reddy on Jul 27, 2009 2:09 PM
Edited by: pinky reddy on Jul 27, 2009 2:09 PM

Easiest way to solve this is to check the mara table in R/3. try and find your material there. If its not there, then it either has been manually created or loaded from a different source system. Check all the source systems if anyone has loaded them. Then check your cubes and ODSs if you can find any transactional data for these materials. If yes, then there is a possiblity that maybe it was created to correct a failed load. You should then identify the document and compare the same on in R/3.
If this material is used in any transaction data, then you can simply delete it. RSA1-> Find the infoobject(characteristic)-> Maintain master data-> Give the material nos-> select the row and press the delete button.
Regards.

Error: The local root folder, ZZZZZZ, does not exist. Please...

Dreamweaver newest - Cloud
Windows 7 Prof 64b SP1
Everyday now upon firing up Dreamweaver I am getting the same error. As long as I worked on this certain site last the day before, dreamweaver of course tries to load that site upon the next startup.
The error: The local root folder, ZZZZZZ, does not exist. Please choose a new local root folder
I have typed the path myself and browsed to it many times. When I go into the Site manager/edit site to correct this, it already has the correct path listed there. If I just leave what is there and hit save, it doesn't work. Once re entering is done it allows me to work on the site again. Connecting to remote/upload files and everything works fine. I can close DW and reopen and all will be fine, for a while.    If I close it and maybe two hours later come back to work on it, DW will report that same error again on startup.
Other editors of the site with same cloud version of DW and same site settings are not having this error. We've combed for differences.
I've deleted the site definition altogether and recreated it. It does not stop the error.
I found some old references to this issue in the old macromedia forums dealing with Mac and spaces or odd characters being an issue in the local folder path. I'm on windows, but the complaints sounded so similar I decided to try a test suggested there. Their suggestion was to create a new blank html file, without saving, add some text, select the text, use the link icon in the properties manager to drag a link out to any file in the files panel. Upon doing so, DW creates a full local path that you can see in your html since you haven't saved the file yet. The suggestors of this test said you should see if your "mac" and DW was having trouble with spaces or odd characters in the path.   Well the following path shows a PIPE character being created in the path by DW on my test page.
file:///W|/private/09 Websites/zzzzzz/index.html
Could this be showing there is some kind of issue that I need to correct? Or is this typical? See the pipe character being listed after the network drive letter of W
Our local root folder path:
W:\private\09 Websites\zzzzzz\
Server Settings:
     Root Directory:
public_html/zzzzzz.com/
     Web URL:
HypertextTransferProtocolCOLON//worldwideweb.zzzzzz.commercial/
Any help or suggestions would be appreciated.

Sudarshan Thiagarajan wrote:
remote
/home/zzzzz/public_html/zzzzz.com
Is this how your remote setting is defined? If it is, do you have a folder called zzzzz.com on your remote server trailing public_html? Ideally public_html is your website root - index.html resides within that, unless your configuration states otherwise.
To come to your actual question of the local root folder, yes, your file manager wont show files if the connection fails. However, accessing it depends on the permissions you have on your network drive. Have you checked that?
I'm not sure why our guy has another folder underneath public_html. My guess is he has some company related hosted test folders for various things under there. I can see a couple other folders under public_html while checking with filezilla. I suppose he just directed our domain to our web folder under public_html.
Again, two others here are using these exact same settings with no root folder errors from DW. We've checked many times and all is the same for them.
Here are some screen grabs of the settings if this makes it more clear.
This last one showing the remote connection address under the files/assets panel is the one that looks strange to me. It shows a home folder / then a folder with our site name / then public_html / then our sitename.com .    Seems convoluted to me. But it works for everyone else so I'm not sure if this error I'm getting has anything to do with these settings or if there is just some old DW settings file hung up in my system that I need to find and delete or what.
Thanks for any ideas.

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

I can't activate the table... because Namespace /ICMPAC00/ does not exist !

Similar Messages

Maybe you are looking for