I can't add a custom alert sound.

I'm trying to add a custom sound for when a buddy logs in. The problem is, after I go through the add sound steps, the sound never shows up in the list and the event alert goes back to its default alert. I'm using iChat AV 3.0.1 (v392), and using AIM.

Hi Robert,
Welcome to the Apple Discussion Pages.
The sounds need to be of the right quality (too high does not work).
They also need to be in the right folder. Sounds can be put in your Home folder/Library/Sounds and will appear in the third division of the sounds available to iChat. They are iChat's Own sounds, the System Sounds and any in your Home/Library/Sounds folder, separated by feint lines in the drop down.
Ralph

Similar Messages

Unable to play custom alert sound.

I'm trying to add another custom alert sound. Had no problem in Snow Leopard, but now with Lion I've created a .wav file in Library/Sounds and it won't play.

All sounds should be in .aiff or .aif format.
You can convert the .wav to aif in iTunes and move that to Library/Sounds.
Hope this helps!

How can I add a custom attribute to a catalog area? (CRM Isa Sales)

Gents,
How can I add a custom attribute to a catalog area? (CRM Isa Sales)
Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
Example implementation code:
method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
* Example, how to add new attributes to a indexcategory
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
* 'F'loat)
* Structure 'IS_OBJECTS' carries actuall identifiers
data: ls_fields        type comt_pcat_ims_feed_ux.
case iv_level.
    when 'C'.                        "Category Level
*     no new field
    when 'P'.                        "Product Level
      ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
      ls_Fields-value = 'S'.
      append ls_fields to ct_fields.
*     exproduct fields
      ls_fields-field = 'REMAN_ABL'.
      APPEND ls_fields TO ct_fields.
      ls_fields-field = 'EXCH_BUS'.
      APPEND ls_fields TO ct_fields.
endcase.
endmethod.
However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
- My example code:
METHOD if_ex_pcat_ims_feed_att~read_new_fields.
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' contains the attributetype
* ('S'tring, 'I'ntegar or * 'F'loat)
DATA:
ls_fields LIKE LINE OF ct_fields.
CASE iv_level.
    WHEN 'C'.                        "Category Level
      ls_fields-value = 'S'.
      ls_fields-field = 'ZTEST'.
       APPEND ls_fields TO ct_fields.
    WHEN 'P'.                        "Product Level
ENDCASE.
ENDMETHOD.
and:
METHOD if_ex_pcat_ims_feed_val~read_new_fields.
CASE iv_level.
    WHEN 'C'.
     ls_fields-field = 'ZTEST'.
     ls_Fields-value = 'Value 1'.
     append ls_fields to ct_fields.
    WHEN 'P'.
ENDCASE.
ENDMETHOD.
In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
Any ideas?
regards,
Wilco Menge

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

My custom alert sounds

I had thought, previously, that I had put my custom alert sounds in System:Library:Sounds with the other Apple made alerts, but they're not to be found there so where else might I look for them?

My custom alert sounds reside in /username/Library/Sounds/.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I have OS 10.9.4, and I can't change the basso alert sound for Reminders. Works ok for the rest of the applications that use an alert sound. Help?

I have OS 10.9.4, and I can't change the basso alert sound for Reminders. Works ok for the rest of the applications that use an alert sound. Help?

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

How do you uninstall or remove custom alert sounds?

I'm using an iMac and I thought I'd try out some new system alert sounds. I hated them and now I can find them to delete them. The alerts show up in system peferences but they're not in the library/sounds folder. I've done a spotlight search for the sound names and nothing come up. Is there a way to remove/delete/uninstall custom system alerts? Help! I hate them!

I have Lion, but run Snow Leopard and always forget that many are forced into Lion.
When you open Finder, do you see the Macintosh HD in the sidebar under Devices?
If not, go to Finder Preferences and check the box next to Hard disks and External disks.
Then select the Mactintosh HD and navigate to the Library / Sound Folder...

How can I add a custom attribute to the create page dialog?

I followed the following link to add a custom attribute called starred and this attaribute can be displayed in siteadmin grid
http://dev.day.com/docs/en/cq/current/developing/customize_siteadmin.html
I would like to let the user input the value when they create a page. That's why I would like to add a custom field in the input dialog box as attached pic.
The method you describe before can only added those CQ bulid-in attribute.
For those custom attribute, how can I added it?

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

How can i add an custom attribute and assign it to an existing custom object class in sun ds

I need to add an attribute to sun ds schema and assign it to an existing custom object class.
I know how to add an attribute but how can i add the attribute to an existing custom object class.
Please help.
Thanks

The objectclasses attribute is multi-valued, so you can add several values to it as long as they are unique.
For instance, I think you can add several declaration of the same objectclass as below (note the difference is the number of spaces in the value) howewer, from a schema perspective, only 1 will be taken into account:
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256' )
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256 ' )
That's the reason why it is safe to delete previous value if you want to update an existing objectclass. No problem to add a new objectclass (new oid and new name) to the schema.
-Sylvain

Add a custom alert monitor set in Central Reports of NWA 2004s

Hi,
I installed recently netweaver administrator 2004s to use central monitoring. I created a new CCMS monitor set with RZ20 and was hoping to see this set in the Monitoring -> Central Reports view set of the NWA (drop down box with all the Alert monitor sets defined in the CEN), but it wasn't there. Is there a way to add custom alert monitor sets created with RZ20 in the Central Reports "View Set" of the NWA ?
Thx
Bart

> Hi,
>
> you see all the Monitor Sets of transaction RZ20 of
> the central monitoring system with an activated
> "public" flag (you set it during the creation of the
> monitor set in RZ20).
>
> But:
>
> The application reads the monitor sets only at
> startup. So, if you create a new (public) monitor
> set, you have to restart the application.
>
> You achieve this by restarting the engine, or in the
> Visual Administrator. Go to "Server --> Services -->
> Deploy", "rutime" tab rider, choose "Application",
> and stop and start the application
> "sap.com/tclmwebadminmonitorprovider_ear".
>
> HTH
> Dirk
That helped indeed.
Thx

Can SCM add/edit custom ADM template ?

I can't find a way to add ADM in SCM.
Also, I can't find any custom ADM settings in a imported GPOPack (which I export from my local computer with custom ADM added)

Hi,
Please follow the steps on this article to add the ADM you created:
Add or remove an Administrative Template (.adm file)
http://technet.microsoft.com/en-us/library/cc739134(WS.10).aspx
If the problem continues, please let us know if there is any error message. You may also paste the content of the ADM you
created and we will check it.
Meanwhile, you can use Registry Extension in Group Policy Preference instead of a custom ADM to set registry value on clients.
For more information, please refer to:
Registry Extension
http://technet.microsoft.com/en-us/library/cc771589.aspx
Hope it helps.
Regards,
Bruce

How can I add transition or effect sound?

Hi,
I know how to make a sound effect on a slide, but it is for the whole slide.
How can I add a transition or effect sould only during the transition period when I click my mouse?
Powerpoint can do it easily, can you send the answer to my email please?
Like (0

just think about the voice setting when you go to the record you should find mono and stereo. I have only mic volume -cd volume and line volume i should have mono mixer and stereo mixer also.
So can i add them to the list ?? For example when you use paltalk program you can play music from your computer in the room so all in this room can hear it eaven if you adjust your volume to mute,this is using mixer mono or stereo.
I hope i explane it for you. Thanx

Can we add Resource custom fields into ASSIGNMENT TIMEPHASED CUBE

Hi,<o:p></o:p>
<o:p> </o:p>
We want to add Resource custom fields into
ASSIGNMENT TIMEPHASED CUBE in project server 2010.<o:p></o:p>
Is it possible?<o:p></o:p>
<o:p> </o:p>
Please help me in this.<o:p></o:p>
<o:p> </o:p>
Thanks,<o:p></o:p>
Sarath<o:p></o:p>

Once column is for assignment and another one is for Resource.
Assignment means when you crate a task then assign that task to resource then task become assignment.
when you will create report in for Resource_skill_resource you will be able to group by or filter resource as per their skill.
As far as Resource_Skill_R_Assignment is concerned you can group by or filter assignment for resource as per their skill
Resource CUBE: The
Resource Non Timephased and Resource Timephased OLAP cubes contain resource data. These two OLAP cubes do not contain any Total fields in common, but do contain several Dimensions in common (such as Booking Type and Resource List).
Assignment: The
Assignment Non Timephased, Assignment Timephased, MSP
Portfolio Analyzer, and MSP
Project Timesheet OLAP cubes contain assignment data. Each of these OLAP cubes includes many
of the same Total Fields (such as Actual Cost, Actual Overtime Cost, Actual Work, and Actual Overtime Work) and many of the same Dimensions (such as Assignment Owner and Project List)
kirtesh

How can I add my custom ringtone to iTunes 10.7?

I recently got an iPhone 5 and I want to add a custom ringtone to it. I created a 29-second clip of a song using a software called Audacity and then saved it as an .m4r file. Then, I tried the drag-and-drop method to add the file to my Tones playlist on iTunes; it did not show up anywhere in iTunes. Then I tried moving the file into the "Automatically Add to iTunes" folder; it still didn't work. I tried shortening the file name, and making the clip of the song shorter (to 20 secs), and nothing worked. Am I doing something wrong? Does anyone know how to solve this problem?
(FYI: I am using iTunes 10.7.0.21; I have Windows 7. I also tried using the "Create AAC Version" function on iTunes, but then I couldn't change the file type from .m4a to .m4r, so that's why I used Audacity.)
Thanks in advance.

I found the answer to my own question! The following discussion really helped, so if you have the same problem, check it out: https://discussions.apple.com/message/18885997#18885997

ISA50 : Can I add a custom parameter to a webshop ?

Hi experts,
In the ISA50 Dev and Ext guide, it is explained how to add custom configuration parameters in XCM. This works great, but the parameter is the same with the same value for all the application (b2b or b2c, whatever the xcm scenario and the crm catalog and variant, my parameter has the same value).
I have a b2b and a b2c site, with different crm catalogs, and different variants (different countries), and I'd like to add a custom parameter for which I could set different values depending on either the XCM scenario or the catalog variant, a parameter depending on the webshop.
Do you know how to do this ?
Thank you for your help, I'll give points for this

The need is : access to a parameter whose value depends on the webshop or on the catalog variant. For example we have a b2c application with different webshops (linked with different catalog variants) for different countries. For this application I have to set a parameter whose value should be different depending on the webshop I select at the first page off the application.
The easy way will be to pass the value through an URL parameter and process it inside the application.
Or maintain the list in a custom table in the backend.
See the starting page of Sony style Europe
"https://shop.sonystyle-europe.com/"
For each country / language (Locale), they have a URL link with a shop variant.
Easwar Ram
http://www.parxlns.com

How can I add a custom title to multiple ALV reports selected by layout?

Greetings and good day, everyone!
Within the past week or so, I posted a question asking the best way to create a program that would generate multiple ALV reports. I got some great ideas, and I've actually coded up a few simple demos based on your feedback -- thank you!
Here's the issue I'm running into: Many of you suggested that I put all report records into one table, and create a field that I could use to filter on later to determine which fields I want to display for the report. For example, if I have 3 different reports, I put all the fields for all 3 reports into a table. I then add a "report key" field. As I put records into the report table for report 1, I code "01" into the "report key" field. I do the same for reports 2 and 3, assigning each a "report key" of "02" and "03", respectively.
I then set up layouts in the ALV for each of the three reports, using the filter option to only pull records with the "report key" value for that particular report. This all works wonderfully! However, I seem to have lost the ability to show a custom title for each layout. I can create a generic TITLEBAR (like "Reporting Center") but I don't know how to reset the grid's title when a layout is selected. I was hoping that SAP might use the layout description as the title on each page, but it doesn't -- it uses the TITLEBAR text.
Any ideas? I think this might be the best way to program multiple ALV reports, but if I can't display the right report title for a particular layout, I'll probably have to go back to my other alternative of putting each report in its own container/screen, and having a button to access each report from the application toolbar.
Thanks,

Srikanth,
I don't have any Selection Screen radio buttons for the user to select a particular report; in my case, they specify some needed criteria by the program in the Selection Screen, the program goes off and does a fair bit of processing/updating, and then displays the ALV reports when finished. They don't want to choose one particular report to view ahead of time; they want to have all 3 (in my case) there to see what processed correctly, what was eligible to process but kicked out with errors, and what failed some matching checks done up front (this layout includes additional fields from the input file so they can see what didn't match up against R/3).
So, while I do like the code example you presented, I don't think it's going to help me in my case.

I can't add a custom alert sound.

Similar Messages

Maybe you are looking for