I Can´t apply a batch adjustmets
I want to apply the same adjustments to a selected group of images.
First I do these adjustments to an image, then I select a gruop, and apply a Lift & Stamp, but only one image is stamped.
What should I do?
Regards.
Guillermo
there should be an option in the stamp window
labelled something like "apply to all selected
images" - if that isn't there, maybe you have the
Primary image only mode selected?
I don´t see this option in the stamp window...
I have tried "Multi" too withou results.
I had a similar problem trying to rotate the images but the solution for that problem I think is not the same for the present one
Similar Messages
-
How can I apply the same crop to multiple photos?
It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
BoHere's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays -
Apply a Batch Process of Clean Up and Level Voice Over?
I want to apply a batch proces of "Clean Up and Level Voice Over," which is a preset.
However, batch processes can only use "favorites." So I try to create a favorite with the preset.
But this gives me an error, "A new favorite could not be recorded because no supported actions were recorded."
Can this be done? If so, what am I missing or doing wrong? I've read the help on the favorites and I'm following those instructions. I start recording, select the presets, apply, then stop recording and I get the error.
If I just select the presets and don't apply them to a wav file while recording preset, I get the same error, "A new favorite could not be recorded because no supported actions were recorded."
Please advise.
Thanks,
-billbHi Bill,
Audition CS 5.5 could record individual effects as favorite operations, but not effects racks. (While I can't discuss what's coming in CS 6 right now, I might suggest that this problem was one that bothered many of us on the team and one that we actively pursued solving early in CS 6 development...)
The workaround I can suggest right now would be to Start Recording a Favorite, then open and apply each effect from the Clean Up and Level Voiceover preset one at a time, with the Default settings.
1. Adaptive Noise Reduction
2. Speech Volume Leveler
3. Hard Limiter
Then Stop Recording the Favorite and it should behave equivalent to the effects rack preset when used in the Batch Process tool.
Durin -
How can i apply adobe bridge in my ipad 2?
how can i apply adobe bridge in my ipad 2?
As when installing an app on a computer, there must be a version for the app that is compatible with the computer and the OS running the computer.
Is there an Adobe Bridge app for the iPad available via the iTunes app store? -
Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!
Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing. -
How can I apply my CS Photoshop membership to a second computer?
how can I apply my CS Photoshop membership to a second computer?
Thank You!
I felt like I was wandering through mazes to get that question to the right
venue.
Thanks again,
Gayatri -
How can I apply text position attributes (e.g. lower third) to more than one title at a time?
jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR -
Transaction can be applied to stateless session bean
is transaction can be applied to stateless session beanif yes/no why?
Just because a stateless session bean is stateless doesn't mean it doens't hold state. The stateless means it shouldn't hold any client state.
It can hold onto for example the dao objects.
The idea is that you pass all the client state to the sessionbean when calling it.
Eg.
public void doBulkOperation( User user ,string param1, String param2){
operation1( user, param1 );
operation2( user, param2 );
public void operation1( User user ,String param1){
//do some work involving user
public void operation2( User user ,String param2){
//do some work involving user
now suppose that doBulkOperation, operation1, operation2 are declared as transaction required. doBulkOperation starts the transaction if there isn't one running and joins the transaction. Then operation1 and operation2 join in the transaction.
Perfectly safe!
What you're not allowed to do is the following:
privata User user
public void doBulkOperation( User user ,string param1, String param2){
this.user = user;
operation1( param1 );
operation2( param2 );
public void operation1( String param1){
//do some work involving user
public void operation2( String param2){
//do some work involving user
This would be unsafe because concurrent calls will change the user and produce unpredictable results and possibly corrupting data.
It will work perfectly thougn if there is only one user or you're using a statefull session bean providing you don't share that bean with several clients. -
Can we apply select statement on internal table.
can we apply select statement on internal table.if yes thrn let me know how to do.
Dear Sachin,
You cannot use SELECT statement on internal table.
If you want to select some rows from internal table you can LOOP the table or you can READ the table.
<u>Please check the following links for your kind reference:</u>
<b>http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
http://www.sap-img.com/ab009.htm
http://www.itsmarc.com/crs/Clas0302.htm
http://www.sapdevelopment.co.uk/tips/tips_itab.htm
http://searchsap.techtarget.com/search/1,293876,sid21,00.html?query=whatisinternaltable&bucket=ALL</b>
Cheers !
Moqeeth. -
Can't apply some master pages to topics
Hello,
I have already logged a bug report on this, but I am hoping that someone else has encountered it and has a suggested workaround. I have searched the forums, but I didn't see this issue. We recently upgraded to RoboHelp 8, and we have installed 8.0.1.
Our help projects typically include multiple master pages (formerly called "templates"). Most topics use the main master page, but a few need to use one of our other master pages that is geared toward a different type of user. Most of our projects have at least 3 master pages.
After conversion from X5 to RoboHelp 8, in some of our help projects, we cannot apply the lesser-used master pages to topics. We can right-click the topic name or within the Design window and open the Topic Properties, and we can select the correct master page, either from the drop-down list or by clicking the Browse button, and we can click Apply. Initially, the topic will show the master page as being selected; however, the header from that master page will not appear grayed out in the Design window for the topic as it should, and when you save and close the topic, the master page is no longer selected for it. This problem does not occur if I select the master page that is used for most topics; that one gets selected and applied correctly.
This problem has happened to me and to 2 of my coworkers. I got my problem topics and templates to work, but I tried many things repeatedly and cannot pinpoint what made the problem stop happening. I am currently trying to solve the problem in a coworker's project without success.
Things I have tried:
1. Deleting and reimporting the master pages that are not working. (When I do this, RoboHelp crashes.)
2. Comparing the code of the non-working master pages to the code of the master page that does work. I saw no problems.
3. Deleting the cpd file while the project was closed and then reopening.
4. Manually changing the tags that appear in the code of the topics to see if I can fool RoboHelp into recognizing the master page. I tried putting in the meta tag and header placeholder tags, but this did not work.
Has anyone run into this, and if so, have you found a workaround?
Thank you,
TammyThis was our error, not RoboHelp's. After trying several different things yesterday, I compared the code of a working master page to that of a non-working master page once again. I discovered an error in some JavaScript, and when I removed the extraneous code, the template worked. I apologize for not finding this before posting! I did try several things before I posted.
Tammy -
I can't apply labels to images in version 2.1.1
Last November 3rd I updated IBooks Author to version 2.1.1 (459). Since that day I can't apply labels to images. I can edit labels for the existing images, but there isn't any label list when I import a new one. If I create a new widget, labels are applied and can be edited.
I've tested this issue with new documents and existing ones with the same result. I also tried to restore a version 2.1 from my previous TimeMachine backups, but no succes.
I've being working well since I installed Maveriks, until this version 2.1.1 update. It is a bug? I've read complains about the same failure in the comments of the App Store from Spain. Can I downgrade iBooks author?
I am finishing a techical book with hundreds of images, so, you know what I am feeling.Might be a bug - best to contact Apple directly so they can take a look, I think...
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Good luck. -
I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?
Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview... -
CAN I APPLY TEXT TO A PROTECTED DOCUMENT IN WORKSPACE
I AM TRYING TO FILL OUT AN RFP THAT I DOWNLOADED FROM THE WEBSITE. IT IS PASSWORD PROTECTED, HOW CAN I APPLY MY TEXT TO THE DOCUMENT?
It depends on the type of document.
Please note that there is nothing about Workspaces that alters the document; it's merely a storage location for it. You should contact the person/organization that provided the document to you to ask how they want you to add text to it. -
How can i apply gradient...
I have a rectangular shape movie Clip (Size :130px X40 px). I
want to apply linear gradient on it using action script. Can
anybody help me how can I apply gradient on it.
Note: This movie clip is made manually. Not by using
createEmptyMovieClip method.i already checked this -
MAKE A OVAL ON YOUR STAGE AND GIVE THIS INSTANCE NAME 'ovl'
(withought single quote) and use the code under
here i am creating two movie clips on stage --
1st is 'ovl' and 2nd one is 'mc'
But to apply gradient on ovl i have to use setMask method
like this _root.mc.setMask(_root.ovl)
i do not want to use SetMask... I want to apply gradient
directly on 'ovl'
How can i do ??????????????
// create emtpy movieclip
mc = createEmptyMovieClip("mc",1);
// set the constants for the gradient fill
// the colors
col = [0x000066,0x0033FF];
// the alphas
alp = [100,30];
// the ratios
rat = [100,255];
//this.onMouseMove = function () {
// we will make a radial gradient
// and make it move with the mouse
// first we clear the previous gradient fill
mc.clear();
// get the mouse-position
// the x-coordinate
x = _xmouse-200;
// the y-coordinate
y = _ymouse-200;
// set the matrix for the transformation
matrix = { matrixType:"box",x:x,y:y,w:400,h:400,r:0 }
// now make the new gradient fill
mc.beginGradientFill("linear",col,alp,rat,matrix);
// now make the shape to fill
mc.lineTo(400,0);
mc.lineTo(400,400);
mc.lineTo(0,400);
// end the fill
mc.endFill();
_root.mc.setMask(_root.ovl)
Text
Text -
How can i apply different color for each cell in jlist component?
hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
Edited by: ryrene on Mar 21, 2010 12:13 AMryrene wrote:
hi guys i need your help and sorry if my english is very bad.
..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.
Maybe you are looking for
-
IPhoto and Apple ID won't work after system update
I've recently updated my MacBook Air to OS X v10.9.4. iPhoto won't work as i am currently using v9.2. I've tried downloading a later version but have been advised that my Apple ID will not work on this computer. NB. I have an iPhone but have not
-
Error while saving shipment document
Dear Gurus, While saving Shipment document i am getting this error Transportation planning point not allowed for export shipment. Please note i am not doing export shipment. Thanks KS
-
While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.
-
I can't get the "repeat" option to show in some events, though it does appear in others. How can i get it to show when I need it? (I read two "soluntions" that supposedly worked, but neither worked for me.)
-
Workflow - Invoice Blocked for Price Reason / Qty Reason
Hi Ramki / Workflow Gurus, Has anyone worked with Workflows WS20000397 and Workflow for Qty Reason ? Please advise me about Agent Determination. I want to workitem to Cost Center Manager. Warm Regards. Pras