I can't Apply license at ACS 5.1

hi,
maybe it looks stupied Q , but this my first time with ACS 5.1 server 1120
i configure the basic configuration using CLI setup command , then I connect https://10.2.2.7 but it ask me for the username and password , when i put the password i cann't login ( invalide username or password )
How to apply the license key ?
when I login to the NAC CAM first time , it ask for the license key before ask for the username and password , what about ACS 5.1 ?
thanks in advance

Hi,
You will first have to login and then apply the license.
the following link describes the same:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_postins.html#wp1152376
The default login credentials are:
username: ACSAdmin
password: default
Hope this helps.
Regards,
Anisha
P.S.: Please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Similar Messages

Can I create a solution manager key without applying license

Hi,
Can I create a solution manager key without applying license?
I need to know an answer to this , because I am installing a Netweaver 2004s component and during installation, I am being prompted for Solution Manager Key.
Can I use an unlicensed Solution Manager instlallation for genereating key?
Thanks,
Harish

Hi,
Yes, for generating key, you can use the Solution Manager for which you have not installed license.
Hope this solves your problem.
Feel free to revert back.
--Ragu

How to apply license for SSM 7.5 & Netweaver CE 7.1?

How to apply license for SSM 7.5 & Netweaver CE 7.1?
My application server java in SAPMMC: appear message: no valid license found.
Acually we already bought license and download,
So, how to solve this license problem?

Chamnap,
When your NetWeaver license expires, it can be restarted, but will only run for 1/2 hour, to allow installing a new license.
Step 1- Start NetWeaver CE from the control console
Step 2 - Log on to NetWeaver Administrator http:///[server]:50000/nwa and go to Configuration tab then Infrastructure sub-tab, then Licenses
Step 3 - Make note of your System Number and Active Hardware Key in the System Parameters section
Step 4 - Navigate to the Service Marketplace http://service.sap.com/licensekey
Step 5 - You are looking for SAP Business Suite - SAP Products with ABAP Stack, Without ABAP stack (WEB AS Java-J2EE Engine) SAP Enterprise Portal link
Step 6 - Fill in your Hardware Key and System # - Make sure you choose this License Type: J2EE Engine - Web Application Server Java (it is not the default selection)
Step 7 - A message at the bottom of the page will note a new key has been generated and you can Download the txt file needed (you also receive an email with the info as well)
Step 8 - (Restart NetWeaver CE - if its timed-out) On the Licenses page of nwa click Install from File > Browse to the txt doc you downloaded and ADD
You now have the new license install. Make note of the date to schedule the time for any future updates, so that service is not interrupted.
If you cannot access the license key on the Service Marketplace you will need to contact your SAP account representative.
Regards,
Bob

Applying patches to ACS 5.1

Hi All,
I hope some one can help out with this problem.
I have an ACS 5.1 with the following S/W load
Cisco Application Deployment Engine OS Release: 1.2
ADE-OS Build Version: 1.2.0.146
ADE-OS System Architecture: i386
Cisco ACS VERSION INFORMATION
Version : 5.1.0.44
Internal Build ID : B.2347
I have downloaded 5-1-0-44-3.tar.gpg, 5-1-0-44-4.tar.gpg and 5-1-0-44-5.tar.gpg to a local repository on the ACS but when ever I try and run the patch upgrade process acs patch install 5-1-0-44-5.tar.gpg repository repository_name I get the following error output....
chmod: cannot access `*.sh': No such file or directory
Invalid patch '5-1-0-44-5.tar.gpg' - missing install.sh
% Error: Failure to open / validate the patch
I have moved the 5-1-0-44-5.tar.gpg to a linux box and have tried to dencrypt the file using gpg -d 5-1-0-44-5.tar.gpg but it then prompts for apass phrase, I tried a few guesses but I could not decrypt it.
So what part of the upgrade process am I missing, or do I need to install some sort of pass phrase so that the ACS can properly decrypt the patch files.
I have tried this with patch 3, 4 and 5. Do I need to start off at pathch 1?
Thanks
Cefyn Arch

Helloz,
Form where did you download the patch. I would suggest you to download from cisco.comif you didn't download before.
http://tools.cisco.com/squish/1D47B
No, You can directly apply the patch 5.
The command you are running to apply the patch is correct.
I would like you to check the few things
1. Are you using TFTP? IF yes, then switch to FTP and then try.
2. Before you apply the patch, make sure you can see the file under the repository.
Show repository
if you can see patch 5 under the repository then you are good to go.
HTH
Jatin
~Do rate helpful posts

Apply Licensing for 5508 HA

Hi All,
I have 2 5508, 5508-A has 500 permanent licenses and 5508-B 200 evaluation licenses, I'm setting up location awareness by adding 180 APs
to 5508-B and then migrating APs on 5508-A to 5508-B and then setting up HA. It is being done this way to avoid disruption to production setup whilst testing, in total I will have 300 APs.
I just need clarification on a couple of points.
1. can I apply additional eval licenses to 5508-B so it supports 300 APs
2. If I apply the HA license to 5508-A, will it push the permanent license count to 5508-B and become standby or will the configuration
on 5508-B be pushed to 5508-A and the APs disconnect from 5508-B and move to 5508-A and 5508-A is primary whilst 5508-B remains secondary.
3. In the event of failover will this be transparent to the MSE and Prime 1.3
I have read the High Availability (AP SSO) Deployment Guide, and wonder if I'm making it to complicated in terms of migrating APs
between controllers and should just work on the production controller, but be careful whilst doing it.
TIA

Well I don't know if this migration will be transparent. The license for an HA sku WLC is 500 which is the max, but the real license count depends on the primary WLC. The HA WLC just needs a 50 ap license to perform the HA role. I don't really think you should use eval license for HA as you will have to disable AP SSO in order to add a true license and then enable AP SSO. This might become an issue if when you disable AP SSO, your wireless goes down. HA AP SSO hasn't been very stable and that's why there is always risk in doing what you want to do.
Like the saying goes... Proceed with caution:)
Sent from Cisco Technical Support iPhone App

Critical Updates - Can you apply to XE?

I am running Oracle XE 10.2.0.1.0 on a laptop for development purposes. The network admin sent me an email saying that I need to apply several Oracle critical patches:
Oracle Releases July 2007 Critical Patch Update
Oracle Releases October 2007 Critical Patch Update
Oracle Database Vault Component Unspecified Vulnerability
Oracle Database Data Pump Component Unspecified Vulnerability (CVE-2008-2602)
These are just a few. It is possible to apply critical patches to a XE system? I do not think that XE has Spatial, Advanced Queuing, etc.
Is it possible that the network admin is seeing that I am running Oracle.exe and he is hitting a standard system that looks up patches?
Please advise.

Oracle XE is not supported.
In licence you can find:
"No Technical Support
Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement."
According this you can't apply any patches.

Can I switch License switch from PC to mac? AE cs5

Can I switch License switch from PC to mac? AE cs5

Platform swaps only apply to current versions. You need to upgrade to CS6 and make the switch.
http://kb2.adobe.com/cps/405/kb405819.html
Mylenium

How can i apply adobe bridge in my ipad 2?

how can i apply adobe bridge in my ipad 2?

As when installing an app on a computer, there must be a version for the app that is compatible with the computer and the OS running the computer.
Is there an Adobe Bridge app for the iPad available via the iTunes app store?

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

How can I apply my CS Photoshop membership to a second computer?

how can I apply my CS Photoshop membership to a second computer?

Thank You!
I felt like I was wandering through mazes to get that question to the right
venue.
Thanks again,
Gayatri

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

Transaction can be applied to stateless session bean

is transaction can be applied to stateless session beanif yes/no why?

Just because a stateless session bean is stateless doesn't mean it doens't hold state. The stateless means it shouldn't hold any client state.
It can hold onto for example the dao objects.
The idea is that you pass all the client state to the sessionbean when calling it.
Eg.
public void doBulkOperation( User user ,string param1, String param2){
operation1( user, param1 );
operation2( user, param2 );
public void operation1( User user ,String param1){
//do some work involving user
public void operation2( User user ,String param2){
//do some work involving user
now suppose that doBulkOperation, operation1, operation2 are declared as transaction required. doBulkOperation starts the transaction if there isn't one running and joins the transaction. Then operation1 and operation2 join in the transaction.
Perfectly safe!
What you're not allowed to do is the following:
privata User user
public void doBulkOperation( User user ,string param1, String param2){
this.user = user;
operation1( param1 );
operation2( param2 );
public void operation1( String param1){
//do some work involving user
public void operation2( String param2){
//do some work involving user
This would be unsafe because concurrent calls will change the user and produce unpredictable results and possibly corrupting data.
It will work perfectly thougn if there is only one user or you're using a statefull session bean providing you don't share that bean with several clients.

I have a perpetual license for CS 6 on windows. I am switching to an iMac. Is there any means by which I can change the license and obtain Mac compatible CS6?

Can a perpetually licensed CS6 for windows be exchanged for a perpetually licensed CS6 for Mac?

yes, Order product | Platform, language swap

Can we apply select statement on internal table.

can we apply select statement on internal table.if yes thrn let me know how to do.

Dear Sachin,
You cannot use SELECT statement on internal table.
If you want to select some rows from internal table you can LOOP the table or you can READ the table.
<u>Please check the following links for your kind reference:</u>
<b>http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
http://www.sap-img.com/ab009.htm
http://www.itsmarc.com/crs/Clas0302.htm
http://www.sapdevelopment.co.uk/tips/tips_itab.htm
http://searchsap.techtarget.com/search/1,293876,sid21,00.html?query=whatisinternaltable&bucket=ALL</b>
Cheers !
Moqeeth.

Can't apply some master pages to topics

Hello,
I have already logged a bug report on this, but I am hoping that someone else has encountered it and has a suggested workaround. I have searched the forums, but I didn't see this issue. We recently upgraded to RoboHelp 8, and we have installed 8.0.1.
Our help projects typically include multiple master pages (formerly called "templates"). Most topics use the main master page, but a few need to use one of our other master pages that is geared toward a different type of user. Most of our projects have at least 3 master pages.
After conversion from X5 to RoboHelp 8, in some of our help projects, we cannot apply the lesser-used master pages to topics. We can right-click the topic name or within the Design window and open the Topic Properties, and we can select the correct master page, either from the drop-down list or by clicking the Browse button, and we can click Apply. Initially, the topic will show the master page as being selected; however, the header from that master page will not appear grayed out in the Design window for the topic as it should, and when you save and close the topic, the master page is no longer selected for it. This problem does not occur if I select the master page that is used for most topics; that one gets selected and applied correctly.
This problem has happened to me and to 2 of my coworkers. I got my problem topics and templates to work, but I tried many things repeatedly and cannot pinpoint what made the problem stop happening. I am currently trying to solve the problem in a coworker's project without success.
Things I have tried:
1. Deleting and reimporting the master pages that are not working. (When I do this, RoboHelp crashes.)
2. Comparing the code of the non-working master pages to the code of the master page that does work. I saw no problems.
3. Deleting the cpd file while the project was closed and then reopening.
4. Manually changing the tags that appear in the code of the topics to see if I can fool RoboHelp into recognizing the master page. I tried putting in the meta tag and header placeholder tags, but this did not work.
Has anyone run into this, and if so, have you found a workaround?
Thank you,
Tammy

This was our error, not RoboHelp's. After trying several different things yesterday, I compared the code of a working master page to that of a non-working master page once again. I discovered an error in some JavaScript, and when I removed the extraneous code, the template worked. I apologize for not finding this before posting! I did try several things before I posted.
Tammy

I can't Apply license at ACS 5.1

Similar Messages

Maybe you are looking for