I can't attach file with yahoomail. after I select the file , and double click it , nothing will be done

I just can't attach any file in yahoomail. when I double-click the file nothing will happen

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Similar Messages

TS3988 iPad is locked up with iCloud backup window. The ignore and settings buttons do nothing. It is like the iPad is locked up

iPad is locked up with iCloud backup window. The ignore and settings buttons do nothing. It is like the iPad is locked up

If you are unable to cancel or power down, try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

Finder hiding files with "..." in the file name?

One of my files is named with a "..." at the start, which seems to be hidden in the finder - I can see from the folder size that the file is in there but can't see it. Is there anyway I can change the file name on a hidden file?

Open the Script Editor or AppleScript Editor in one of the subfolders of Applications and run the following:
tell application "Finder" to quit
if (do shell script "defaults read com.apple.finder AppleShowAllFiles") is "1" then
do shell script "defaults write com.apple.finder AppleShowAllFiles 0"
else
do shell script "defaults write com.apple.finder AppleShowAllFiles 1"
end if
delay 2
tell application "Finder" to run
If you change your mind later, run the script again.
(93787)

Firefox doesn't reconvert special characters in the file names when download a file with any special characters in the file name

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/815207]</blockquote><br>
if i try to download a file with any special characters in file name (e.g. File_Name.pdf), it doesn't reconvert them from the "sanitize url" process and download the file an incorrect name (e.g. File%5FName.pdf).
This is really annoying.
Thank you for your patient

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

I can't open my Mac. After I downloaded the update and I restarted it I can't log in

It's just in the start screen with my computers my computer's name and Guest user. With sleep restart shutdown on the bottom. Now my iPhone is lagging

Hi Dmitry.
Please send more detail to our support team at [email protected]
Which type of project was it?
Mac or Windows?
Does this affect all projects?
Thank you, RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

HT4436 can i use icloud with my pc if all the files on my pc significantly exceed the capacity of my ipad and iphone?

I want to back up my PC files to icloud but all by files are significantly more than the capacity of my ipad and iphone. Can I still back them up to icloud?

iCloud will not backup your PC, only your IOS devices will be backed up, so it doesn't matter how much is on your PC.
Use Windows Backup.

How to spool file with a timestamp/seq_number in the file name

Hi I try to write a test script that will have some kind of timestamp or seq_number in the spool output file's filename itself.
so e.g.
test_abc_20120425161616.txt
I can do it on shell but is there a way I can do it all in sqlplus.
I recall I see something similar in statpack long time ago..

vxwo0owxv wrote:
Hi I try to write a test script that will have some kind of timestamp or seq_number in the spool output file's filename itself.
so e.g.
test_abc_20120425161616.txt
I can do it on shell but is there a way I can do it all in sqlplus.
I recall I see something similar in statpack long time ago..
>Hi I try to write a test script that will have some kind of timestamp or seq_number in the spool output file's filename itself.
so e.g.
test_abc_20120425161616.txt
I can do it on shell but is there a way I can do it all in sqlplus.
I recall I see something similar in statpack long time ago..
set termout off
col dt new_value dt
select to_char(sysdate,'YYYYMMDDHH24MISS') dt from dual;
set termout on
spool file_&dt
-- place your SQL here
spool off
Handle:     vxwo0owxv
Status Level:     Newbie
Registered:     Mar 14, 2011
Total Posts:     142
Total Questions:     79 (59 unresolved)
WHY am I NOT surprised?
Edited by: sb92075 on Apr 24, 2012 4:37 PM

How can I print from my ipad2 to my hp6210 all in one using printopia...I can see the list on my ipad2, I select the printer and say print but nothing happens.

How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.

A few things to consider.
The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared. If the iMac is having problems printing to the printer it could indicate a problem with the share setup.

Can't network Mac with W7 Ultimate 64 bit (but W7Pro32 and WXP work)

Hi all,
I posted a long (probably too long) issue recently but despite nearly 200 people viewing it, no-one offered a solution. So I am re-posting a shorter, clearer statement here but below I also enclose the long full diagnostic information (at the bottom).
At home we have 4 computers: a Macbook Pro with OS X 10.7, a Windows XP desktop machine, a Windows 7 Professional 32-bit laptop, and a Windows 7 Ultimate 64-bit workstation. As a result of my extensive experimentation and testing I found that:
- Networking and sharing drives between the Macbook and the XP machine worked fine in both directions
- Ditto for the Windows 7 Professional 32-bit laptop - everything "just worked" exactly as it should
- However the Windows 7 Ultimate 64-bit machine simply would not work from the Mac to the PC (I was however able to access the PC from the Mac)
- All PCs were of course able to inter-operate in both directions across the network with each other
My conclusion therefore is that the Mac is set up and working correctly, there are no connectivity problems, and almost certainly this is an issue relating either to 64-bit W7 (versus 32-bit) or it's an issue relating to "Ultimate" versus "Professional" (or both). I have not 'fiddled' with anything, the only setting changes made which could be considered low-level were the 'secpol' change on the W7x64 machine which I read in many posts might solve the issue (it didn't).
I am not a technical expert although I have some ancient history in the field. I just want it to work. Everything I read tells me that it should - now Windows and Mac both use SMB, etc etc. But it doesnt.
Absolutely desperate to get this solved quickly now. I would even happily have paid someone, but finding an expert in Switzerland who can come to the house, speak English fluently plus (of course) be fluent in Windows 7 Ultimate x64 and Mac... it's proved to be a test too far. So if anyone out there can help... thank you in advance.
Alastair
ORIGINAL DIAGNOSTIC DETAILS
CONCLUSIONS
There appears to be a fundamental compatibility problem between Mac OS X and Windows 7 Ultimate 64 bit.
The problem actually appears to have a degree of randomness / instability about it (see below when, during diagnostics, the workstation actually disappeared, then reappeared!).
I can only presume this issue relates in some way to the “enhancements” either related to Ultimate versus Professional, or to 64-bit versus 32-bit variants.
At the moment there is only one solution I am confident would work, which is to revert my workstation to 32-bit… however this is not an option for me as it would render around 21GB of RAM unusable and remove the whole raison-d’etre for purchasing a powerful workstation in the first place.
I am therefore stuck and in need of help!
PRECONDITIONS
In all cases I am using connectivity between three different PCs and a Macbook Pro 2.53GHz Intel Core Duo, 4GB RAM, Mac OS X running version 10.7 (Lion). BTW I know Lion is new but it was exactly the same with 10.6.
I have three PCs: an XP Pro machine, a W7 Pro 32bit machine and a W7 Ult 64bit machine.
All three PCs are running the same antivirus and firewall (Norton Internet Security 2011), this was left ON for all tests on all machines.
I have already been through all the myriad of advise on this subject: as you can see from the below, file sharing etc has all been enabled. The “secpol” changes etc have also been made on the W7 Ult 64bit machine only (but these were only made because it didn’t work without the changes and everyone seemed to think this was needed).
All my Windows computers are configured to workgroup “WILF” and also set this Workgroup name on the Mac in the WINS settings dialogue. No homegroup exists on the network.
No other “tinkering” has taken place. Although I have some tech skills, I am just a bloke who wants to use his computers, not a computer genius. As such the Tosh laptop is pretty much fresh out of the box, the Mac has nothing non-standard and the only setting change is the WINS setting for the Workgroup name. The workstation is a little over a year old so but I have not poked around with anything deep inside it, so if there is anything wrong it should be superficial – the kind of thing a basic user could have changed by mistake and can easily be changed back.
DIAGNOSTIC TESTS
Connecting between Macbook and old Windows XP machine (XP Pro 2002 SP3):
-        Open ‘Finder’ on Mac, PC immediately visible under ‘Shared’.
-        From Mac: Single click on PC icon indicated “Connecting” then “Connect as Guest”, opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        From PC: Opening “My Network Places” and clicking on “View Workgroup Computers” shows all my networked computers including the Mac, double-clicking the Macbook icon opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        In short: this appears to work as it should.
Connecting between Macbook and new Windows 7 machine (W7 Pro 32-bit 2009 edition, Tosh laptop w/ Intel Core i7 M620 @ 2.67GHz, 4GB RAM):
-        Open ‘Finder’ on Mac, PC immediately visible under ‘Shared’.
-        From Mac: Single click on PC icon indicated “Connecting” then “Connect as Guest”, opens a list of all shared and public folders. Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        From PC: Opening “Windows Explorer” and single-clicking on “Network” shows all my networked computers including the Mac. This time I decided to try logging into the Mac drives as me, rather than as a guest:
Double-clicking the Mac icon opens up the ID / Password dialogue box.
Inputting my correct username and password for the Mac immediately opened up all the folders on the Mac I have access to (the shared / public folders but also the folders for my login account on the Mac).
Am able to copy files from Mac to PC, am able to copy files from PC to Mac.
-        In short: this appears to work as it should.
Connecting between Macbook and fairly new Windows 7 workstation (W7 Ultimate 64-bit 2009 edition SP1, Supermicro workstation w/ 2 x Intel Xeon W5590 @ 3.33GHz, 24GB RAM):
-        Open ‘Finder’ on Mac, PC WAS INITALLY immediately visible under ‘Shared’… however while carrying out the testing for the XP machine and the laptop, it has disappeared! The other two machines remain visible.
STOP PRESS: It reappeared… for how long, is anyone’s guess…
-        From Mac: A single click on PC icon almost instantaneously indicates “Connection Failed”. Repeated attempts produce the exact same result. To verify the basics some elementary diagnostics:
Mac IP address 192.168.0.11 can be successfully pinged from the PC.
PC IP address 192.168.0.3 can be successfully pinged from the Mac.
From PC entering comment “ping MACBOOKPRO-598A” (the latter being the computer name of my Macbook) works successfully i.e. name resolved OK, no packet loss, 1ms round trip.
From Mac unable to run the reciprocal ping test for EITHER PC since I don’t know what to put into Ping to allow it to resolve the computer names.
However I note that all 3 Windows machines remain visible in the Finder, only the two which work (the XP machine and the W7 32bit laptop) have the “Eject” symbol next to them and they are still the only two which work both ways without problem.
In the Finder window after clicking on the PC icon in the left column, I get another instance of this icon in the next column with “Connect As” underneath and presently “Connection Failed”. If I click on “Connect As” I receive the error “There was a problem connecting to the server ‘alastair-ws’ (which is the PC name of the workstation).
Finally if I use the GO -> Connect to Server option in Finder, using SMB://alastair-ws I receive the same error as above. I get EXACTLY the same error if I use the IP address of the workstation 192.168.0.3 as above.
-        From PC: Opening “Windows Explorer” and single-clicking on “Network” shows all my networked computers including the Mac. Again I decided to try logging into the Mac drives as me, rather than as a guest:
Double-clicking the Mac icon opens up the ID / Password dialogue box.
Inputting my correct username and password for the Mac immediately opened up all the folders on the Mac I have access to (the shared / public folders but also the folders for my login account on the Mac).
Am able to copy files from Mac to PC, although naturally not the other way around.
-        Therefore the PC-to-Mac seems to work OK, but the Mac-to-PC does not no matter what I try, although the IP is visible and it’s clear the connectivity exists (or Mac copy onto PC would also not work).
[END]

You can give this a try on your Ultimate machine. While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having. Hope it works for you.
The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
The other problem is the Minimum Session Security for NTVLM SSP based Clients.
To get around this:
1.     In Vista, open the Control Panel
2.     Switch to "Classic" view
3.     Double-click Administration Tools
4.     Double-click Local Security Policy
5.     Or Secpol.msc
6.     Expand "Local Policies" and select "Security Options"
7.     Alternate : Type secpol.msc to get editor up then
8.     Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
9.     Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
10.     Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
11.     Change the setting from "require 128 bit" to unchecked (No Minimum)
12.     Click OK
the real difference between vista and windows 7 procedure is 10 and 11

Downloaded files with ActiveX not displays using Windows 8 and IE 11

We are using ActiveX for downloading file from our server. After downloading ActiveX decrypt downloaded files. ActiveX works fine with all other IE versions but in case of IE 11, when we download the files ActiveX doesn't throw any error, but when we check
the files at downloaded location, it looks like there was no files downloaded. When we the same process again using "IE 11 using "run as Administrator" the downloaded files displays at the downloaded location.
After debugging, We didn't found error like "access denied or path not found or any other error." with or without Administrator mode. but still facing this issue.
When we download file again using "Browse for Folder" it display the previous downloaded folders, but not exists at the actual location.
Your quick reply will highly appreciated.
Thanks

Hi,
on the user account.
Tools>Manage Addons>Show all addons>Locate your custom download control in the list and double click it to display its properties.
at the bottom of the Properties dialog there is a list of allowed sites. compare this with the settings on the Administrators account. The value should be the same as on the user account.
If you are talking about the Akami Download manager from TechNet.
Name:                   DLM Control
Publisher:              Akamai Technologies Inc.
Type:                   ActiveX Control
Architecture:           32-bit
Version:                2.2.6.2
File date:              ‎Thursday, ‎28 ‎June ‎2012, ‏‎4:02 PM
Date last accessed:     ‎Wednesday, ‎24 ‎October ‎2012, ‏‎9:23 PM
Class ID:               {4871A87A-BFDD-4106-8153-FFDE2BAC2967}
Use count:              3
Block count:            1
File:                   DownloadManagerV2.ocx
Folder:                 C:\Windows\Downloaded Program Files
it is only available in the x86 version.
On server versions of windows you can only download software from MS on the Admin account. By default
http://microsoft.com is mapped to the Trusted sites list...
If possible please post back with the Properties of your custom AX download control from the Manage Addons dialog.
Rob^_^

Creating a ringtone with iTunes (after song selection) is difficult!

Hey-
I'm having an issue with creating ringtones using the built in ringtone maker in iTunes after purchasing a eligable track from the iTunes store. There are some ringtones that I found on the iTunes store. There is one purchase where you get 6 seperate ringers (but in one audio file). I place the slider bars at the beginning of the ringer I want and then at the end of that ringer. When I go to play it back to make sure I'm getting what I want, it's not playing the correct ringer that it should be playing, but rather either the first ringer, or the 4th ringer...very odd! I know how to 'trim' clips as I do this daily with Windows Movie Maker...left slider starts at where you want the tune to start, the right slider stops at where you want the tune to end...very simple! Yet with the ringtone maker built into iTunes, it doesn't seem to work that way at all.
The tune that I am referring to is called "6 (or six) business ringtones" in iTunes (just do a search it will pop up)! It is one audio file, with 6 different ringtones in the file, the total file length is like 30 seconds (give or take). Well I like the 2nd ringtone. So after I bought the file, I then went into the ringtone maker in iTunes and dragged the slidders where the 2nd ringtone starts and ends, I then play it back but it doesn't play what I trimmed. Instead it plays other parts of the file (as in the 5th and 6th ringers or the 1st ringers or it starts playing the end of the 1st ringer and combines it into the 2nd ringer that I want. It doesn't seem to do what it's suppose to do and it's really starting to tick me off! I have all these charges from the iTunes store where I have been repeating trying to make the file because it's not working correctly and I'm getting all these charges on my credit card. All I want is for the ringtone maker to work correctly and make my tone as I'm telling it to do, but it won't. Does anyone know how to make this darn thing work correctly? If it wasn't for the file being DRM'd, I would drag it into my own program and do it myself with something I know works correctly. This clearly does not work correctly.
Any help would be appreciated.
Thanks.
Message was edited by: Scottcarterwalsh
Message was edited by: Scottcarterwalsh
Message was edited by: Scottcarterwalsh

Have you tried this:
http://www.intomobile.com/2008/10/07/iphone-ringtones-create-free-iphone-rington es-using-itunes-8.html

When I double click a PS file, it opens PS but not the file. Why?

Since I purchased CS5, I've found that double clicking, or dragging to the Ps (or Ai) icon in the dock will only open the program, but not the file. I then have to go back and double click the file again to bring it up. I've looked in preferences but cannot find a way to resolve this. A friend who also has CS5 does not have this problem.
Thanks, Neil.

Have you updated your OS lately?
Are you on a Mac or a PC?
That behavior usually is sign of a file vital for Photoshop (and some other Adpobe apps too) missing.
I've published an old Adobe technote about that here http://www.ninisworld.com/thecorner/tutorials/photoshopopen.html including also the file needed on a Mac.
If you are on a PC I have no solution to suggest.

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

what's wrong with this picture

When I try to upgrade to Mountain Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, how can I upgrade?

When I try to upgrade to Mountain Lion OS form Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, what is causing this problem, how can I find a solution, is someone else having this problem?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

I can't attach file with yahoomail. after I select the file , and double click it , nothing will be done

Similar Messages

Maybe you are looking for