I can't burn cd's with windows and get error 4261

Until yesterday I had no problem burning cd's with my iTunes-program in my Windows. All of a sudden (apparently) I constantley get the error-message 4261 having an unknown error. It seems that the problem has nothing to do with the selected tracks of the playlist. Often the burning is almost ready but then it stops sending a 4261.
What am I doing wrong and/or how can this problem been solved?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

I can't burn a disc from Itunes without getting error 4280 repeatedly.

I can't burn a disc from Itunes without getting error 4280 repeatedly. I was just able to burn a CD and now can't burn another. Any thoughts? I know my CD burner works as I just made a disc. I have tried changing file type from Audio to MP3 with no luck. Thanks for trying to help me.

Hello Sonni,
It sounds like you are unable to burn a disc with iTunes due to this error code. I would first use the following article to check issues with the type of disc drive:
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
If this is not the case, use the following article to help troubleshoot the issue:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Cheers,
Sterling

Trying to register with ePrint and getting error code.Ajax submit failed: error = 403, Forbidden.

Trying to register with ePrint and getting error code.Ajax submit failed: error = 403, Forbidden. I need help??

To bypass this error attempt either a restart of your computer, or use an alernate broser such as firefox or chrome. If you already have another browser the latter may be the easier fix.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

I am trying to burn a cd from itunes and get error message 4251

Evening guys
I new to itunes and am trying to burn my first cd, however I get one of 2 error messages 4450 or 4251how can this be rectified or is the error on my part.
cheers durbsguy

I also get this error message on itunes.
I am using Windows Vista. My firmware is totally up to date as is my itunes.
Hopefully Apple can pull their finger out and give us a solution. I haven't been able to burn discs for a long time. Makes me wonder why I have invested in Apple products.

Developing an iOS app on Windows and get error 90161 on upload from Mac

Hello,
I have developed an AIR for iOS app in Flash CC 2014 on Windows. I use MacinCloud managed server for uploading .ipa to store for testing. It is virtual server service with Mac OS. They have Application Loader pre-installed.
I made certificates [cer converted to p12] on Windows and installed provisional profile. I made another certificate on Mac and added it to provisional profile too.
I get error when trying to upload from Application Loader:
ERROR ITMS-90161: "Invalid Provisioning Profile. The provisioning profile included in the bundle com.xxx.yyy [Payload/yyy.app] is invalid. [Missing code-signing certificate.] For more information, visit the iOS Developer Portal."
Stuck here. Tried to add cert made on Mac. Flash doesn't like it and stops compilation.
Any help will be highly appreciated.

Unfortunately I have no experience with Apple Testflight, but I can show you how to host on your own server.
Create a .plist file on your server with the following data in it:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>items</key>
<array>
<dict>
<key>assets</key>
<array>
<dict>
<key>kind</key>
<string>software-package</string>
<key>url</key>
<string>http://yourserver.com/path/to/ipa</string>
</dict>
</array>
<key>metadata</key>
<dict>
<key>bundle-identifier</key>
<string>com.yourcompany.yourgame</string>
<key>bundle-version</key>
<string>current version of your app</string>
<key>kind</key>
<string>software</string>
<key>title</key>
<string>name of your app</string>
</dict>
</dict>
</array>
</dict>
</plist>
Then, on your server, make an HTML page with the following code in it:
<a href="itms-services://?action=download-manifest&url=http://yourserver.com/path/to/plist">click here to install<a>
Navigate to that page on your device, click the link, and it should work! (assuming the adhoc provisioning profile you built your app with contains permissions for your device)

Working with WebLogic81sp2 and getting error while processing a file.

Hi,
getting error while working with the weblogic81sp2 and java based application. In this m processing a file. the file gets processed but doing command 'ps -ef' shows process still running. The exception log is like:
<26-Mar-2008 10:10:48 o'clock GMT> <Warning> <WebLogicServer> <BEA-000337> <ExecuteThread: '21' for queue: 'weblogic.kernel.Default' has been busy for "645" seconds working on the request "Http Request: /shield/xml", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
<01-Apr-2008 06:50:00 o'clock BST> <Error> <HTTP> <BEA-101017> <[ServletContext(id=197633402,name=/shield,context-path=/shield)] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/jsp/layouts/mainLayout.jsp' : Broken pipe
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.processException(Ljava.lang.Throwable;Ljava.lang.String;)V(InsertTag.java:956)
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()I(InsertTag.java:884)
at org.apache.struts.taglib.tiles.InsertTag.doEndTag()I(InsertTag.java:473)
at jsp_servlet._jsp.__main._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(main.jsp:2)
at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:305)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:301)
at org.apache.struts.action.RequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:1069)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(TilesRequestProcessor.java:274)
at org.apache.struts.action.RequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(RequestProcessor.java:455)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(TilesRequestProcessor.java:320)
at org.apache.struts.action.RequestProcessor.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:507)
Please help me!

Not sure why you want to replace. Since the response of the proxy would remain to hold the request body by default.
If you have stored the opaque element in a variable ($var_opaque), then you can do the following.
XPath : .
In variable : body
Expression : $var_opaque
Check - "Replace node content"

I have 64bit windows and install proper one for windows and get error saying wron i tunes and to reinstall the right one

i cant get itunes to install also get error after 1 use that itunes does not work again

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Can't burn a cd with windows 8. error message 4310?

Can anyone offer a solution? I was on hold forever with apple support and had to hang up.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Can I use my shuffle with Windows and Mac?

My shuffle works great with my computer running windows, but doesn't mount on my Apple, or recognized by iTunes (on my G4).
Can I use the Shuffle on both computers?

Yes you can. The iPod Shuffle always uses FAT32 so it's compatible with both OSes out of the box. With a dual 800 I'm guessing you've got USB 1.1 ports. You're also running 10.4.2 so you should be fine. I've used my shuffle with a Windows PC running XP via USB 2.0 and my upgraded Sawtooth running 10.3.9 via USB 1.1 (both direct port and via the keyboard).
Note that there is no "manual" mode for the shuffle so iTunes won't show you what's on there unless you let it remove all the songs first.

Can't install icloud panel on pc with windows 7 get error message

every time I try to install on icloud panel on windows 7 pc, I get an error message during install saying install could not be completed. It does not give me a reason or any codes. HELP!!!!!

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Installed itunes on my computer with Windows 8, getting Error 2 message about support

Downloaded iTunes to my computer using Windows 8. I keep getting a error message ERROR 2 about no apple support. Also tells me to uninstall iTunes and reinstall it. I have done this three times and nothing change

See Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components.
tt2

Can't login with gdm and get error message

Hey, I had an arch install up and running last night. I was tinkering with gnome themes, and installed a bunch and eventually tried to mess with the login screen. I installed something, I think like gnome-settings-manager or something like that, and it basically never worked. I tried to change the login BG and some stuff, but couldn't do it, the program would freeze.
About an hour later, I realized chrome wouldn't run, and I had to use the default browser. I restarted and then when I logged back in, I have a black login screen with an error that says "Install Problem: the configuration defaults for gnome power manager have not been installed correctly please contact your computer administrator."
When I try to login, it starts like it's going to work, but then brings me back to the same screen.
So basically I can't login at the moment, I tried pacman -Runs gnome gdm gnome-setting-manager gamin gksu
and then pacman -S gnome gdm gksu gamin
but that still gives me the same screen.
Any ideas where to go from here?
Edit: Decided to install KDE as a workaround, I'll see where that gets me, opening a new thread as my root partition is now full... and IDK how to fix that atm
Last edited by B-80 (2011-01-10 23:31:10)

Just my 2 cents, seeing that nobody is replying...
You could try to create another user and see if it works well, just to understand if it's a problem in the user configuration files, or in the system configuration.
If the new user works well you could try to import your config files from your /home/user/ folder one by one and see which one messes up everything.
If the new user has the same problems, it's a more serious problem, maybe you could try to remove packages one by one (pacman -Rscn package), starting from the last one you installed (you can list packages by installation date using yaourt -Qe --date) until it works again (taking care of not removing essential packages).

Can't burn Blu-ray disk image because get error message, "The operation couldn't be completed. (DSPPublishing error -1012.) What does it mean?

There was an error creating your disk image. The operation couldn't be completed. (DSPPublishing error -1012)

I don't have a background image. I called Apple and they had no idea what that error number meant. I deleted preferences for FCPX still didn't work, then delted all preferences and set up a new user. It now works. Apple has no idea what is going on.

Print with pasta and getting error

hello, i have customs printing driver for pasta but as i print report i find an error,
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
The output .pdf has zero file size.
Any one help? .
And how can i locate which part cause this problems?
Thanks.

Please post the details of the application release, database version and OS.
Please see if these docs help.
How to investigate printing issues and work towards its resolution ? (Doc ID 297522.1)
APP-FND-00500: Afpprn when Using pdf2ps with Pasta (Doc ID 413402.1)
APP-FND-00500: AFPPRN ... An Error Occurred In Getting Printer Driver Information (Doc ID 867965.1)
How to Print PDF with UTF8 in R12? (Doc ID 778970.1)
11i : Pasta Pasta Printing Setup Test (Doc ID 264118.1)
Diagnostic Test Catalog for 12.1.3 (Doc ID 1083807.1) -- PASTA
Thanks,
Hussein

Can not update PO via update_po api and getting error in Budgetary Control

Hi all,
I am trying to update PO by calling update_PO API. I am trying to follow the manual but am getting an error and can't update the PO. Here is the code:
declare
l_result NUMBER;
l_api_errors apps.po_api_errors_rec_type;
l_version_no NUMBER := 0;
l_po_header_id po_headers_all.po_header_id%TYPE;
l_po_original_amount NUMBER;
v_po_updated_price NUMBER;
l_oracle_promised_date DATE;
v_vendor_site_id po_headers_all.vendor_site_id%TYPE;
l_vendor_site_code po_vendor_sites_all.vendor_site_code%TYPE;
l_return_status VARCHAR2 (2000);
     v_error_message VARCHAR2(2000);
BEGIN
l_version_no := 0;
l_po_header_id := 0;
v_po_updated_price := 0;
v_error_message := NULL;
BEGIN
SELECT revision_num, po_header_id, vendor_site_id
INTO l_version_no, l_po_header_id, v_vendor_site_id
FROM po_headers_all
WHERE segment1 = '*****' --<PO#>
AND type_lookup_code = 'STANDARD';
END;
dbms_output.put_line('l_version_no is ' ||l_version_no);
--Getting 0 here
BEGIN
          l_result := PO_CHANGE_API1_S.record_acceptance(
                    x_po_number => '****', --PO#
                    x_release_number => null,
                    x_revision_number =>l_version_no,
                    x_action => 'NEW',
                    x_action_date => null,
                    x_employee_id => 1359,
                    x_accepted_flag => 'Y',
                    x_acceptance_lookup_code => 'ACCEPT WITH CHANGES',
                    x_note => 'All valid',
                    x_interface_type => 'APITEST',
                    x_transaction_id => null,
                    version => '1.0');
          dbms_output.put_line('Record Acceptance l_result is '||l_result);
--Getting 1 here. Success.
l_result :=
po_change_api1_s.update_po
(x_po_number => '****', --PO#
x_release_number => NULL,
x_revision_number => l_version_no,
x_line_number => 1,
x_shipment_number => NULL,
new_quantity => 10,
new_price => NULL,
new_promised_date => NULL,
launch_approvals_flag => 'Y',
update_source => NULL,
VERSION => '1.0',
x_override_date => NULL,
x_api_errors => l_api_errors,
p_buyer_name => NULL
EXCEPTION
WHEN OTHERS
THEN
dbms_output.put_line('error is ' ||SQLERRM);
END;
dbms_output.put_line('l_result is '||l_result);
--Getting 0 here.... Failure
IF (l_result <> 1)
THEN
FOR i IN 1 .. l_api_errors.MESSAGE_TEXT.COUNT
LOOP
v_error_message :=
v_error_message
|| ' '
|| l_api_errors.MESSAGE_TEXT (i);
END LOOP;
END IF;
COMMIT;
END;
Final error message is:
Supplier site is either exempt from CCR registration or has not been added to agency vendor. Procedure PSA_FUNDS_CHECKER_PKG.glxfck returns an error without any details to the calling procedure PO_ENCUMBRANCE_POSTPROCESSING.execute_gl_call. Please contact your support representative. Your Budgetary Control action completed with exceptions. DO_UNRESERVE-100: User-Defined Exception
Cause: A SQL error has occurred in DO_UNRESERVE. The SQL error is User-Defined Exception.
Action: Take note of both this error number and the actions you were trying to perform. Contact your system administrator for further assistance.
Your Budgetary Control action completed with exceptions.
Please let me know what can be the croblem here. I can not find anything here on this issue. Please help.
Thanks.

Can you review these notes, may help you.
R12: Funds Check Error 'PSA_BC_XLA_PUB.Budgetary_Control Returns an Error' for Purchase Orders and Requisitions When Federal Financial is Installed [ID 1292042.1]
Procedure PSA_BC_XLA_PUB.Budgetary_Control Returns an Error Due To "XLA_AP_TECHNICAL_ERROR" [ID 950385.1]
Fund Check Is Failing - Procedure PSA_BC_XLA_PUB.Budgetary_Control Returns An Error [ID 1338545.1]
Error: PSA_BC_XLA_PUB.Budgetary_Control When Approving A Project Related PO [ID 1319065.1]
Procedure Psa_bc_xla_pub.Budgetary_control Returns An Error For Autocreated Blanket Release [ID 751635.1]

I can't burn cd's with windows and get error 4261

Similar Messages

Maybe you are looking for