I can't burn CDs in 7.0 with any consistency - most times, failure

Every time I think I have the problem solved (uninstall and reinstall iTunes, reduce burn speed), I go back to not being able to burn a CD. I've probably had a dozen "bad" burns (diagnostic, below), and 4 successful ones. I can't figure out what the difference is. I absolutley HATE the new iTunes and I wish Apple would pay attention to all of us out here having this troubles, and send out a fix of some sort.
Help, please!!!!!
Here is my diagnostic:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 2400
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), CDR4_XP (6.2.0.110),
UpperFilters: GEARAspiWDM (2.0.6.0), Cdralw2k (6.2.0.110), pwd_2k (6.2.0.110),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
IDE\DiskWDCWD1600JB-22GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHL-DT-STCD-ROM_GCR-8481B_______________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STCD-RW_GCE-8483B________________B105___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
F: HL-DT-ST CD-ROM GCR-8481B, Rev 1.06
Drive is empty.
G: HL-DT-ST CD-RW GCE-8483B, Rev B105
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48 0 0.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive G: HL-DT-ST CD-RW GCE-8483B on CDR media at speed 0X.
Regards,
Mike

Hi,
I have not yet done as you've requested, but I have nevertheless successfully burned three cds in a row, after a series of one failure, one sucess and one failure. after the second failure, i opened the playlist that I wanted to burn, closed iTunes, re-opened iTunes (which opened in the playlist that i wanted), put in a blank CD-R and immediately burned the cd without further action. i followed this process with the three different playlists that i wanted to burn, and for whatever reason, i was able to burn the three cds. the first time i had the failure this evening, i changed the burn speed, and it burned the next one. but then i tried to burn a second playlist, and i had a failure. so, that's when i tried the "open" and "close" iTunes process above. i have no idea whether that had anything to do with my success, or if i just got "lucky". maybe next time, i'll chant and whisper some incantations first...
thanks for your help. i see that you have been responding to a lot of folks. i'm just not sure what those updates are, and i have replaced my harddrive since i bought the computer, so i wasn't sure if dell had my proper information still, which is why i didn't follow your advice (at least at this point).
regards,
mike

Similar Messages

  • Can't Burn CDs (emachines T3830) - used to be able to

    All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
    Here are the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    GATEWA SR84510A
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
    IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
    Audio CD in drive.
    Found 10 songs on CD, playing time 36:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:25:30
    Track 3, start time 08:09:17
    Track 4, start time 11:45:27
    Track 5, start time 14:54:67
    Track 6, start time 18:08:62
    Track 7, start time 22:04:47
    Track 8, start time 25:36:07
    Track 9, start time 28:27:65
    Track 10, start time 32:19:45
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

    Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
    Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
    I ran CD Diagnostics and...
    TriGem Computer, Inc. Emachines
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Cdr4_xp (5.1.0.209),
    UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
    Found aspi32 running.
    IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG CDRW/DVD SM-308B, Rev T100
    Audio CD in drive.
    Found 20 songs on CD, playing time 73:59 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:38:00
    Track 3, start time 07:13:15
    Track 4, start time 11:03:30
    Track 5, start time 13:51:32
    Track 6, start time 17:22:30
    Track 7, start time 20:54:65
    Track 8, start time 24:51:72
    Track 9, start time 28:53:55
    Track 10, start time 32:47:40
    Track 11, start time 36:36:07
    Track 12, start time 40:03:10
    Track 13, start time 44:03:72
    Track 14, start time 47:44:67
    Track 15, start time 51:35:60
    Track 16, start time 55:36:50
    Track 17, start time 59:25:52
    Track 18, start time 63:14:25
    Track 19, start time 66:44:37
    Track 20, start time 70:02:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8.
    The drive CDRW speeds are: 2 4 8.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
    Any sage advice, folks?
    Cheers
    Beldo

  • I can no longer burn CDs  - "may be incompatible with this disc burner, try slower speed, try another make of disc"  Still doesn't work

    I can no longer burn CDs  - "may be incompatible with this disc burner, try a slower speed, try another make of disc"  Tried that, still doesn't work.

    Try a free burning utility which allows you to turn off the laser for test burning (so you don't waste media).  Try burning a test CD outside of iTunes.  If it works it's iTunes. If it doesn't work it could be computer software or hardware but then we know how to proceed.
    List of burning software on pure-mac.com - http://www.pure-mac.com/diskfile.html
    Burn - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • Can't burn CDs in iTunes

    I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

    I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
    -NKA

  • Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

    Problem was first noticed because I can't burn CDs in iTunes.
    The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
    By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
    I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
    The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
    Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway ESSEX2
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce4 MX 440 (Gateway)
    NVIDIA GeForce FX 5200 (Gateway)
    Connected Device Information:
    DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Gateway Essex2   Windows XP  

    Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

  • Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

    hi,
    I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the  cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger). 
    Please help
    Thanx

    iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
    Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
    Also, make sure the your other firmware & drivers are up to date.

  • Toonz help.........error 4000 can't burn cds

    I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    NVIDIA AWRDACPI
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
    UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
    Found aspi32 running.
    SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
    USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
    SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
    SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
    Current user is administrator.
    D: _NEC DVD_RW ND-2500A, Rev 1.0A
    Audio CD in drive.
    Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
    Track 1, start time 00:02:00
    Track 2, start time 05:08:25
    Track 3, start time 08:07:62
    Track 4, start time 12:02:17
    Track 5, start time 17:01:02
    Track 6, start time 21:57:00
    Track 7, start time 25:53:25
    Track 8, start time 30:25:50
    Track 9, start time 33:31:17
    Track 10, start time 37:14:72
    Track 11, start time 40:17:65
    Track 12, start time 43:05:67
    Track 13, start time 47:14:72
    Track 14, start time 51:44:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4 8 16 20.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG CD-ROM SC-148A, Rev B402
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

    I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
    Jr

  • How can I burn a disk of photos with a modified file name?

    After importing photos from scan device, I use Photos > Batch > Change to rename files.  When burning a disk the changed file names do not transfer with the image but use the original file name.  How can I burn a disk of photos with the modified file name?
    This is what I have done so far with no success.
    Drag selected photos from Event to Burn Folder where the file names were changed. Burn folder lists file with original file name.
    Drag albums to Burn Folder with the same result.
    In Filer I am able to change the iPhoto Library > Master > Date > Filename and then drag to burn disk folder and see the changed name but this is a single file exercise without a view of the file's image, but to use the new file name in iPhoto events I have to repeat the naming convention.

    File > Export.
    In the resulting dialogue note the "Name" section. Choose to use the Title as Filename.
    Regards
    TD

  • Can't burn a cd from elements 9  any ideas?

    Can't burn a cd from elements 9  any ideas?
    The problem seems to be that it will not display my devices for selection,

    On a mac you can send the photos to imovie, iphoto, or iDVD if you have that. The only kind of video disc PSE can make (on either platform) is the horrible VCD format, which was never very good and is fast becoming obsolete. It's getting harder to find dvd players that can read that format.

  • I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    Hello there, tomazdes.
    The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Particularly:
    Accepts discs but they don't mount or are automatically ejected
    Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
    Reset the System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
    OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
    OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
    If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hello Folks.. I have recently purchased a ipad mini with wifi   Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks in India? Basically does this ipad support GSM network?

    Hello Folks.. I have recently purchased a ipad mini with wifi   Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks? Basically does this ipad support GSM network?
    Message was edited by: Murali.KR

    Sorry but that was a completely pointless post.

  • Pls let me khnw how i can set a password so i can stop my i phn 4 sharing with any pc or i tunes, thanks

    pls let me khnw how i can set a password so i can stop my i phn 4 sharing with any pc or i tunes, thanks

    I haven't used the SiliconDust product, but I have been using a similar product by Ceton, for nearly five years.
    By inserting a CableCARD into the tuner, you would have access to the same channels as a set-top box. You rent a cableCARD from Verizon, just like you'd rent a set-top box from them. I have an m-card, which just allows multiple channels to be tuned at once, unlike the older s-card.
    You do, however, lose Pay Per View and on-demand programming. For me, it's not a great loss.
    The program guide is handled through Windows Media Center, which holds programming data for the next 14 days. You schedule your recordings there. It's also smart enough to reschedule shows, if there's a recording conflict (too many scheduled shows, not enough tuners)
    Although you can contunue to use an IR blaster (I use one), you can also get a Media Center companion app from Ceton. It doesn't require a Ceton tuner...it will still control Media Center. The app costs a few bucks, but it's worth it. They make it for Android and Apple, and maybe Windows Phone. It will let you manage your schedules, and use your phone/tablet as a remote control over WiFi.
    Buy a big hard drive to hold your scheduled recordings. Expect to use an average of 10-15 gigabytes per hour of HD recording. The beauty of this system, is that you can just add another hard drive whenever you need more space, sonething the STB's won't let you do.
    For service in other rooms, use an Xbox360 if you have one. Or, buy a Ceton Echo extender (again, doesn't require a Ceton tuner). Don't use Wi-Fi for your extenders. Wired Ethernet is a must...most wireless won't be able to keep up.
    Hope this helps.

  • Can't burn CDs - can't find driver updates

    Aaargh! It's happened again!!!
    When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
    This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
    My diagnostics are:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-4100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Video Controller (VGA Compatible)
    NVIDIA GeForce 6800
    NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: JLMS XJ-HD166S, Rev DGS3
    Audio CD in drive.
    Found 14 songs on CD, playing time 47:42 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:00:65
    Track 3, start time 06:23:00
    Track 4, start time 10:34:72
    Track 5, start time 12:18:40
    Track 6, start time 15:35:57
    Track 7, start time 18:35:42
    Track 8, start time 21:04:62
    Track 9, start time 24:09:32
    Track 10, start time 27:54:65
    Track 11, start time 31:57:02
    Track 12, start time 34:21:27
    Track 13, start time 37:23:25
    Track 14, start time 44:53:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
    Got any helpful suggestions... please post details

  • Can't burn cds

    my itunes has started acting up and no longer burns cds. the program will let me create a playlist, but when i insert a blank cd it just spits it back out and reads "insert blank cd" even though that is what i've used- and i've tried using various types of cds and it does that with all of them. itunes, as well as my mac hardrive, has also stopped recognizing audio cds with content on it, which makes me think it might be a problem with the cd drive hardware. any suggestions on what to do?

    Yeah, it really sounds like a hardware issue. You can try creating a new user on your machine and seeing if the problem exists there as well. If it doesn't, there is something corrupt in your main user. If it does, it's a system-wide issue (likely hardware, not software related).

Maybe you are looking for

  • How to Populate DropDownByKey boxes in a table ??

    Hiii The scenario is like this... In a table there are 2 columns ( statically created , nothing is dynamic UI  creation ) . The 1st column has a textview and the other has DDBK . In the DDBK the value to be populated is dependent on the value in the

  • How to migrate iTunes Library from an external hard drive to a new Mac Book Pro?

    How to migrate iTunes and iPhoto librarys from an external hard drive to a MacBook Pro?

  • How to publish pages made in third party software

    On my "homepage" websites I can upload html pages created by third party software (Adobe GoLive CS2 in my case) onto my .Mac sites. I can't find anything in iWeb about publishing custom-made webpages in iWeb and/or on the iWeb. Is this possible with

  • Bean tag issue

    I have a bean define tag within my logic:iterate like below. I need this to compare something within the loop. <bean:define id="oldValue" name="sect" property="sectId" type="java.lang.String"/> <% sId = oldValue; %> the logic works as expected but th

  • HP 7410 officejet-network wizard does allow me to enter WPA password

    I upgraded my old Verizon router to a newer model (actiontec) and it works perfectly with all my wireless devices in the house, except for my printer! The wireless feature on my HP office jet 7410 All in One Printer worked great on my old router. How