I CAN'T CALL AFTER PHONE SOFTWARE UPDATE

After I had updated NOKIA XM5800 software, i can't call with this phone. I can recieve calls, sms, but I can't call. Then I updated it again, but it still doesn't work. They said at my operator, O2-Slovakia that the problem will be in the phone. Has anybody a similar problem? Please help...

samyak wrote:
facing same problem with my n-73,after update....
when i press "call" button in the contacts(and also in Log,inbox), there is no response....speed dial works .....and also if i type the number and press call button it works...
if i restart the phone,then there is no problem....
this happens now and again....i will have to restart everytime it happens.....
try hard reset your phone. i guess you talking about v4.0812.**.* it has lots of bugs.
4.0839.**.* works fine.
Glad to help

Similar Messages

E71 white screen appers after phone software updat...

please help me i have updated my phone sotware through nokia phone software updator software after updating when i install my backup in to my phone the phone was showing white screen not working my nokia e71 please help me

Hi niteshdamore
Have a look at this post:/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/m-p/398147/highlight/true#M112
Happy to have helped forum in a small way with a Support Ratio = 37.0

All contacts gone after phone software update by O...

Here's another one for you: after performing a software update from within Ovi Suite with automatic backup before and restoration afterwards, the following is missing from my C3-01 phone: 1. All contacts are gone (yikes!); 2. The main view settings are back to default, not what I selected. Fortunately I was able to restore the contacts from a previous backup so BEWARE: before updating, make sure you have a separate manual backup since the automatic restoration performed by the Ovi Suite does NOT deliver.

Furthermore, the selected group tones are gone and all back to Default. It appears these are not part of a backup...

Can't sync after device software update

I updated the device software on my 8530 to version 5.0.0.1000. Since then I have been unable to synchronize Organizer data between my 8530 and Outlook (2003) on my PC (Windows Vista) using the BlackBerry Desktop software (version 6.0.0.43). I keep getting the error message "Error encountered: Error code - 0x80040fb3. Check documentation". After clicking OK I get the message "Unable to complete synchronization".
Media data synchronizes okay.
Also, after the device software update, whenever I turn off and turn on my 8530 I get the message "Uncaught exception: java.lang.NullPointerException"
Help appreciated!

We have been down similar paths... I upgraded the OS to 5.0.0.983 last night and it didn't go well. It was getting the "Uncaught exception: java.lang.NullPointerException" error.
I wiped the whole BB and started fresh. Then I was getting 0x80040fb3 errors for Contact sync'ing.
I have ~700 contacts in Outlook and they sync'd fine. I went through the sync details screen and found a couple that once I deleted them, it would get to the end of the sync process and then give me that "Unable to Complete Synchronization" error. In utter frustration, I moved all the contacts to another contact folder and created a "Test Test" contact. It still had the unable to complete error - even with just ONE contact? Anyone have any ideas?

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

My ipod 4th gen can't be recognized by itunes after itouch software update

my ipod 4th gen can't be recognized by itunes after itouch software update. I have reset both PC and itouch to no avail

http://support.apple.com/kb/TS1538

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

HT1414 after a software update the device is not working properly and can not open any website.

I can operate it properly after an software update . Now no website cannot be opened and cannot get emails. Main thing cannot go to tunes and app store .

First Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
on the other hand phone is started with a message on screen phone is disabled.

After a software update the youtube icon disapeared from the ipad. How can i recover it?, After a software update the youtube icon disapeared from the ipad. How can i recover it?

After a software update (the instalation of ios 6), the youtube icon disapeared. How do i recover it?

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

TS1367 after a software update, my macbook pro was supposed to restart, since then, it doesn't restart & there is nothing i can do, any help please ?

Hello,
after a sofware update, my macbook pro was supposed to restart,
since then the start up process begins & after few seconds, the mac goes back to off without starting, what's wrong ?
thanks for any support,
Amine

Let me add a little bit of details,
after the software update, I was asked to restart my laptop,
while doing it, I got a message error :"some files couldn't be updated".
Since then, everytime I start my macbook pro, I have the grey apple & screen, with a kind of updating bar (grey as well) at the bottom,
when the bar reaches approximately 30 to 40%, it disappears & the laptop swiths off.
Ihave tried to start on a safe mode, it doesn't work either,
thanks

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

My xpreia not found in about phone software updates

After buying this phone and spending ages setting it all up, I find that I can not activate the my xperia feature. Sony website says go to settings/about phone/software updates to find options but nothing is there, just stating that phone is up to date !
How do I activate my xperia on the E1 ? I am wanting to setup the lost phone feature.
Thank you.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
The My Xperia update rolls out gradually and may not be available for all devices yet. If haven't got the My Xperia update you could use the Google tracking service instead in the meantime. Go to https://www.google.com/android/devicemanager for more information.
What are your thoughts about this forum? Let us know by doing this short survey.

Error in Phone Software Update page ???

When looking for a software-update for 6131
-> Update over-the-air
Step 2/6 says Back-up data ... to memory card ...
I might be blind, but I didn't see a backup option on my 6131.
Did anyone see?
Perhaps it's an option for S60 phones!?
Greetings
Carzan
Nokia 6131 V5.50

Hi,
I checked the software update link on Nokia-UK site and found the follows info in update over PC:
Personal data such as contacts, photos and messages stored in the phone memory may be deleted during phone software update. Before updating your phone software, we recommend you back up this data to your PC using Nokia PC Suite Software. Once your phone software is updated, you can restore the data using PC Suite.
This is correct text. And update over-the-air text is not correct. Just push next if you saved all data from your phone.
AndreyMessage Edited by andrey_gres on 20-Apr-200704:01 PM
Message Edited by andrey_gres on 20-Apr-200704:02 PM
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

I CAN'T CALL AFTER PHONE SOFTWARE UPDATE

Similar Messages

Maybe you are looking for