I can't call nor receive call for my mac what will I do?

I can't call nor receive call for my mac what will I do?

Please be more specific? Are you asking about the Passcode Lock? did you change your Passcode and now you fail to remember it?

Similar Messages

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!

    In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
    Sorry for my bad english :S
    Please, please help me

    Contact the carrier.

  • Can't make or receive calls or texts. I have FULL signal.

    I have 100% full signal, all bars are there. I CAN NOT MAKE OR RECEIVE  phone calls or text messages!! Started to happen on 6/17/2013. I have  the Samsung Galaxy. My wife and I and a friend  have the same phone and they are having the same problem as me. THEY  can not make calls or receive calls or text messages as well........they  have full signal too!!! Again, this has been happening since 6/17/2013.  IT IS ONLY HAPPENING IN MY HOMETOWN AREA!!! THE TOWN WHERE I LIVE!! WHEN I  LEAVE MY TOWN...half mile north or half mile south-IT WORKS FINE AGAIN... WHEN I COME HOME, NO CALLS, NO TEXTS, AND  THERE IS FULL SIGNAL. WHEN I TRY MAKING A CALL I WATCH THE SIGNAL, I  PRESS SEND, THE SIGNAL IS FULL SIGNAL, AND 15 SECONDS LATER IT DROPS  THE CALL (message says call ended). DOESN'T CONNECT THE CALL. THE TOWN IS WILLIAMSVILLE NY. THE  ZIP CODE IS 14221. ACADEMY STREET, MILL STREET, SCHOOL ST, EAGLE ST all in zip code 14221. These phones are our ALL IN ONE phones. We don't have home phones. We can't call anyone while at home . THERE IS A PROBLEM WITH THE  VERIZON TOWER THAT SERVICES THIS AREA. PLEASE HELP!
    AGAIN...THIS  IS HAPPENING TO ME, MY WIFE, AND FRIENDS.  IT ONLY IS HAPPENING IN ZIP CODE 14221 WHERE WE ALL LIVE. I KNOW THAT THERE ARE OTHER VERIZON CUSTOMERS HAVING THIS ISSUE HERE (14221) AS WELL. IT'S  NOT OUR PHONES. THERE IS A PROBLEM WITH THE SERVICE.

        theroamer Having issues with signal is definitely not how we want you to experience wireless service. We take this very seriously because just like you I use my cell phone for everything and recently eliminated my home phone. I would love to help you with this issue, so lets get started. I show you are in an area that has great coverage. I do show multiple customers have reported issues in your area and a few weeks ago, it shows the issue was resolved. You advised that you cant get calls inside your home. Have you always had signal issues inside the home? If you step outside your door, can you make a call, send text, or access data related functions at all? Have you tried to power cycle the devices or perform a master reset. Before you rest the device, lets try a SIM card removal. Power the device off first and follow these steps http://tiny.cc/2gn6yw . This will reconnect you with the towers. You should have your wife and friend perform the same steps. If you continue to have the issues, try performing the hard reset http://tiny.cc/9in6yw . Make sure all information is backed up first. The steps above should help with your issue. If your still having the problems with signal, send us a private message with your name and mobile number. We can try submitting another trouble ticket for the issues so that we continue to inform our technicians in hopes that your area issue is revisited. I truly apologize for the issues your having and that your trouble-tickets were closed without any resolution. I look forward to hearing from you soon.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Can't make or receive calls  - Motorola Razr Maxx

    My wife and I can not make or receive calls on our Motorola Razr Maxx phones.  We can receive and send texts.   We have turned off our phones and restarted to no avail.  We are in the Metro Atlanta area.
    Any ideas or suggestions?

    Thank you both. I just had a chat with VZW support, and there seems to be an issue in the area.  I would think the SIM card solution would work if it were just one phone, however, both my phone and my wife's have the same issue.
    Thanks for the responses.

  • Can't make or receive calls without speaker on Iphone 4

    can't make or receive calls without speaker on Iphone 4

    Hi Susan,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to troubleshoot your iPhone:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best,
    Jeremy

  • I can't make or receive calls on my IPhone 4.

    I can't make or receive calls on my IPhone 4.  There's nothing but dead air on both ends and then it freezes.  If I can answer a call, it lasts for a few seconds then gets staticky and cuts out.  I took it to Verizon and they couldn't get it to work either.

    If Verizon, who actually had your phone in hand, was unable to get it to work, what makes you think that we users here, who have no access to your phone, could help?  You need to bring your phone to the experts who can actually run diagnostics on the phone, and that is Apple.

  • When calling or receiving calls, after a minute or so, is the call, give notice "call failed, THEN RUNS OUT OF SERVICE, then activated" SEARCHING "and then restoring the coverage. THIS FOR THE 100% of calls

    When calling or receiving calls, after a minute or so, is the call, give notice "call failed, THEN RUNS OUT OF SERVICE, then activated" SEARCHING "and then restoring the coverage. THIS FOR THE 100% of calls

    You may have a bad sim, contact your phone carrier and see if you can get a new one.

  • Help!!! I can not make or receive calls! other functions itself. Internet, sms, whatsapp work. I restored as new iphone from the phone and from itunes and still not working.

    I can not make or receive calls! other functions itself. Internet, sms, whatsapp work. I restored as new iphone from the phone and from itunes and still not working.
    Sorry for my english i'm spanish

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

  • My phone says it can't make or receive calls but it sends texts. How do I fix it?

    My phone says it can't make or receive calls but it sends texts. How do I fix it?

        haynes88,
    Yikes! I want you to be able to make phone calls on your cell phone! I would recommend what others have stated on here as well. Remove the sim card for a good 30 seconds while the phone is off. Then try to make the phone call again. Have you ever replaced the sim card on your device before? You can always get a new sim card for free at a corporate store location: http://bit.ly/3SdsA Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Galaxy S5... can't make or receive calls

    Intermittently the phone portion of my S5 decides to stop working even with full bars and 4g.  I was only made aware because it happened during the middle of a call.  I still receive data and text but can not make or receive calls (incoming calls go straight to voicemail apparently).
    I've looked over the internet and tried the following...
    cycling airplane mode
    cycling wireless
    power cycling
    removing battery
    re-seating the SIM
    wiping the app cache
    However, none of that has resolved the issue.  I'm open to suggestions outside of hopping clockwise on one foot while juggling.
    Thanks for the help.

        Hey there, jetxten! I regret that you're having trouble with calls. I'm sure we can help! I've just sent you a direct message. Please reply there. Thanks!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • I can't make or receive calls/texts on iPhone 4?

    My iPhone 4 started to act up. I can't make or receive calls, and same thing with texts. I also can't connect to the internet. When this happens, my iPhone turns off & it won't turn back on unless I charge it. When it's back on, there's a message about a reset that tells me I should go to apple.com/support. Later, it goes back to normal and everything works. And again, it stops working. This has been repeating for a couple of days. Help, please?

    sounds like a defect battery

  • Can't make FXO calls, and receiving calls has no sound

    An issue started today where I can't make or receive calls using FXO ports (POTS lines).  I tested the cable going into the FXO ports and the lines work fine making calls. 
    When I call the number of one of the FXO lines in the UC320, the SPA303 rings properly, but when picked up, there is no sound on either side.  When the SPA303 hangs up, the caller phone call ends 20 seconds later.
    When trying to dial out, there is no dial tone, and the call eventually hangs up.  I'm using very old firmware, but there were no changes made that should affect the UC320. 
    I've tried FXO Impedence Testing, but nothing happens, it just says "Test Running" and the phone number doesn't get a call. 
    My network does not have the UC320 as a firewall pointing to the internet, so the time and date is way off, but this hasn't caused any issues. 

    Hi and Welcome to the Forums!
    From your description, it sounds as if your device itself has somehow failed. My opinion is that your formal support channel is what you need to use -- via your carrier.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can't make or receive calls or text after I dialed *228, option 1

    I can't make or receive calls or text after I dialed *228, option 1 as instructed by tech support. The message said "Programming successful". I am a pre-paid only customer ($50/ month unlimited) LG basic flip phone. When I try to call anyone now, I get a Verizon recorded message: "We're unable to complete your call. To speak to a customer service representative hang-up and dial *611"  And *228, option 2 not helping either.

        Hi squiddlydiddly!
    I'm sorry you're having issues in making and receiving calls with your prepaid device. I would need to direct you to our Prepaid department for assistance.
    In order to reach a Prepaid Department representative, please call 888-294-6804. When prompted, enter your prepaid phone number. Then press 4, 5, 4 and enter the pass code for your account.  If you do not know the pass code, enter in four zeros.  Then the system will then transfer you to a Prepaid representative.
    Thank you,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • IOS5.0.1 constant error "iPhone can not make or receive calls.  Restore from iTunes":  I get this message and the phone will no longer work (happend once while on airplain mode and now once while in wifi only area, out of cell range).  help!

    All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4.  Newest OS.  Never happened with old OS! Cycling phone on/off does not help.  Ignoring message causes phone to cycle off then on.  After first time this happened, I restored.  Six days later...same problem!  Clearly a new fix is necessary.  Suggestions? 

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

Maybe you are looking for

  • DMU 1.2 stuck in Execute Post Conversion Tasks

    It is stuck in the post execution conversion tasks.  I don't even see the steps listed.  DBSNMP somehow got in while the DMU was up. I put the db in blackout but should have put in restricted mode also, which i did after killing the dbsnmp session. F

  • Copying EAN

    Hi! I hope this is the place to post this topic. I created a new article X1 based on existing article X.  X1 has 12 variants and I need to copy EAN/UPC's from X into X1.  I saved X and when I reopened it, clicked on "variants" a notice came up statin

  • Can't activate Office 2011 for mac (downloaded from office 365 portal)

    Hello All, I've installed Office 2011 for mac which was downloaded from office 365 Portal. However, during installation process there was not a windows for activation (key or sign in method). Is there a way to force activation on Office 2011 for mac?

  • ACI Placement

    Hi, We are using IDS 5.1. We have following tree dc=mycompany,dc=com and ou =people, ou=groups, ou=roles branch. for e.g we have a group GROUP X with users user1, user2, user3. and we created an Admin role that will contain an ACI that will allow use

  • OpenWithNewPassword not working

    I recieve the error "ORA-604: error occurred at recursive SQL level %s" when i try to logon with an expired password. my code is: Dim conn As New OracleConnection conn.ConnectionString = "DATA SOURCE=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MyHost)(