I can't change the field status of Tax section in MIRO transaction

Hello, I need to change to visible the field status of RTAX1U12-FWBAS, RTAX1U12-HWSTE and RTAX1U12-HWBAS of Tax section in MIRO transaction. In table settings, administrator option of that section I can change them, but when I save the variant the system do not save the settings. There is another transaction where these field status are maintained? I think that in another part these fields have the status "Invisible".
Best regards,
Alfredo Del Portillo

Hola Alfredo,
The table control for taxes in MIRO cannot be changed by the  administrator function like other table controls.                          
Which columns are displayed or not is decided by the program dependend on several parameters.                                                                            
The tax base amount is changeable or not is controlled by a setting in FI customizing:         
IMG -> Financial Accounting -> F.A. Global Settings -> Tax on Sales/Pur    
  -> Basic Settings -> Change field control for Tax base amount                                                                               
I hope the above information answers your inquiry.                         
Xalu2
Mauro

Similar Messages

  • How can I change the values of Withholding tax grid in MIRO trx

    Hi everyone,
    I am trying to change WT_WITHCD field in MIRO's Withholding tax grid by using  MRM_HEADER_CHECK. I developed the following code but the changes didn't appear in the screen:
            LOOP AT i_rbkpv-h_rbws
            INTO    r_h_rbws.
              d_index = sy-tabix.
              READ TABLE i_zrmm_tnd_wht
              INTO r_zrmm_tnd_wht
              WITH KEY   invoice_type = r_h_rbws-witht
                         invoice_ret  = r_h_rbws-wt_withcd
              BINARY SEARCH.
              IF sy-subrc EQ 0.
    <b>            r_h_rbws-wt_withcd = r_zrmm_tnd_wht-debit_ret.</b>
    <b>            MODIFY i_rbkpv-h_rbws FROM r_h_rbws INDEX d_index.</b>
              ENDIF.
            ENDLOOP.
          ENDIF.
        ENDIF.
    <b>    ASSIGN ('(SAPLMR1M)RBKPV') TO <fs_rbkpv>.</b>
        IF sy-subrc EQ 0.
    <b>      <fs_rbkpv> = i_rbkpv.</b>
        ENDIF.
    Do you have any idea?
    Thanks in advance!
    Regards.
    Leo.

    Hi Naimesh,
    I tried to assign only the withholding tax but it didnt work...
    It modified the value but then it doesn't appear in the screen...
    Thanks in advance for your help.
    Leo.

  • Can not change the field property - 10gR2 reports crashing on Linux :(

    All I want to do, is to change one field's property from NUMBER to DATE in the property palette. It does not allow me to do it (not east like forms). I can not change the field property - 10gR2 reports keep crashing on Linux :(
    I don't know if this is a Linux specific iDS issue, or a generic one.
    What are the proper steps to change one field (in my query, the field name is ptime, it was defined as a number field originally, and now I need to change it to DATE and apply the proper format mask). The matching database field definition was modified from number to date.
    very frustrating...
    Any input is appreciated.
    Message was edited by:
    zaferaktan

    nop, did not change anything in the select statement at all. Just selected the related query under the data model (in the navigator), then selected the related query from within the property panel, connected to the db, then from the related navigor menu selected compile all, when the related query was highlighted (selected). Then I saved it, checked the groups, and bingo - the datatype was changed from number to date. Then I went to the related object under the page layout and applied the format mask (that was another funny story). And it worked. It is not as flexible as the forms for sure - pain in the a.. And I still don't know why Reports Builder keeps crashing on Linux - have no problems with Forms Developer on Linux at all. It is a certified RH platform with all the required libs, rpms, etc installed. I am certain it is not an installation issue. Maybe I should check Metalink and apply if an iDS 10gR2 patch exists for reports.

  • How to change the field status of "plant" of standard activity ?

    hi,dear all:
    I want to know how to specify the field status of "plant" of standard activity from  "ready for input" to "required entry".
    Can the field of the stand network be changed?
    Thanks.

    Hi,
    Try in T-code OPN6
    Regards,

  • Can you change the field names in the address book?

    Can you change the Pager field name to read 2nd cell?

    No.
    This add-on https://freeshell.de//~kaosmos/morecols-en.html allows you to modify the labels of the 4 custom fields of the contact card

  • Can't change the 'compilation status' for multiple items in iTunes 8.

    Hi there,
    I've got an issue regarding the disappearance of the compilation 'tick box' when changing multiple items. Its there when you click on 'get info' for the individual track but its no longer there (in iTunes 8) when I want to change the compilation 'status' for multiple tracks at a time.
    In iTunes 7 I selected all the tracks and changed their compilation status by accident, but now, in iTunes 8 I can't change this without going through my library, track by track!.
    Please help.
    Thanks,
    Fred

    Multiple Get info now has tabs - look on the options tab.

  • How can I change the asset status in the Fixed Assets Addon?

    Hi All,
    I installed SAP Fixed assets addon in our customer, and I have imported the fixed assets.
    There are assets which book values are 0, but the asset status is active.
    How can I change this assets status to inactive?
    I
    My SBO version is SBO 2007A SP1 Patch 05.
    Thanks: Veronika

    Dear All,
    Thanks for your answers. I have managed to solve this problem.
    Now I have another problem,  but I will create a new message about it.
    Thanks: Vera

  • Can we change the fields of database unique index in a customised table?

    Hi all..
    I want to know that can we create or change or delete the database unique index of a customized table?
    In my case, there is a customised table with 4 primary keys with all the records to be maintained thru transaction code SM30.
    There is database unique index maintained for this table which has 2 fields. These 2 fields are out of the 4 primary fields of the table.I hope I have made myself clear!
    Now when I am trying to insert a record in the table it give me a short dump.( It says duplication of records is not allowed)
    The reason being that the new record that I am trying to insert in the database table has those 2 fields for which the unique index is maintained is the same as an already existing record.And the other two fields are different from the already existing record.So overall the combination of the 4 primary fields is different.
    Please tell me how shall I proceed now?
    I also tried to change the Unique index but it is asking me some kind of authrization(You are not authorized to make changes (authorization object S_DEVELOP)).Also I am not sure whether changing the unique index is feasible or not.?
    Thanks.

    hi
    I think you will not be able to do unique indexing withou the help of primary keys,so use all the primary keys into the table field selections  and and then create indexing otherwise dupilication of keys can occur. if you are not able to keep the primary keys then go for non unique key indexing,where you have to add the client field and the any keys of your wish.

  • Can not change the field BSEG-REBZG on the document line item

    Hi,
    I am not able to change the invoice reference field on the document already posted. I have tried config. settings on change document line items but unsucessully.
    The problem is with the field BSEG-REBZT, if the field value  is "V" RESIDUAL item I am not able to change it but if this field value is "Z" I am able to change it.
    Can anyone who have come across this situation please guide me on this.
    Thanks,
    Srini

    Hi Eli,
    Thanks a lot for your resolution. I have assigned points to you.
    Unfortunately my problem has not been solved inspite of implementing the so mentioned SAP notes.
    Do we need to do anyother settings? Can you please guide me?
    Thanks,
    Srini

  • Can you change the fields in add field under contacts?

    does anyone know how to change fields names?

    Tap on the field name while in the "Edit" mode, pick what you want or add your own custom label.

  • How can I get and change the values of Withholding tax grid in MIRO trx

    Hi everyone,
    I have a requirement where I need to get and change WT_WITHCD field in MIRO's Withholding tax grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi doesn't have this value.
    Do you have any idea?
    Thanks in advance!
    Regards.
    Leo.

    Hello Leonardo,
    You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
    LOOP AT ti_drseg INTO ls_drseg. 
      lv_index = sy-tabix.
      LS_DRSEG-MWSKZ = 'I0' . " < For example
      MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
    ENDLOOP.
    FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
    ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
    <drseg> = ti_drseg[].  " this will modify the data in MIRO with your modified data
    Regards,
    Naimesh Patel

  • Can i change the field position in a Form using Oracle Forms Personalization?

    In my form a field is appearing at the top of page.I want that field to appear at the bottom of page.Can i achieve this using Forms Personalization?

    Yes, you can.
    Action: Property
    Property Name(s): X_POS, Y_POS
    Value: If following standards you should specify X_POS in .01 increments and Y_POS in .25 increments.
    You can play around with help -> diagnostics -> properties -> item to interactively set the value for the X and Y position until you get it on the spot you want; once you have the right values set the personalization rule to set the property values accordingly.
    Beware that this is done for individual items, so if you need to make space and shift other items you'll have to set the properties for each one.

  • How can we change the field confirmed work of SAP PPM from edit to not edit mode ? I need it into non edit mode for time recording with ChaRM

    Hello everyone,
    Do someone meet this issue ? Do you know if it has a link with customization of ppm or customization of ITSM ?
    Many thanks in advance for your replies !

    It seems that I've solved this issue. To get it work:
    1. Select checkbox Time Recording and Travel Expenses via CATS for project type. Path: SPRO —> SAP Customizing Implementation Guide —> SAP Portfolio and Project Management —> Project Management —> Structure => Define Project Types
    2. Run/schedule a synchronization with the report DPR_CATS_CPR_TRANSF (Transfer of CATS Itemizations to Project Management Application).
    Time Recording from a Request for Change to a PPM ProjectTask - Working with Projects - SAP Library
    Regards,
    Alex

  • Changing the System status for previous transactions

    Hello,
    Could some body help me with this ?
    I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions  ( Prior to this config ) with status ABC , but system status is not Inprocess.
    How can we change the system statuses for all these transactions? do we have a report for this?
    Best Regards,

    Hi,
      You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
    Regards,
    Lakshmi.Y

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

Maybe you are looking for