I can't change the format or letterbox in the latest iMovie?

i updated my imovie, and now i regret it, or just not to sure about it, i always letterboxing in my videos and change the audio, but now seem the lastest imovie (purple logo) has got rid of it, is it actually gone or am i not looking right tabs?
please help

By default the disk share in the TC is named data
You must have changed it for it to have a space in it..
Jump down to the last screenshot for how to change just the name of the disk.. you need to uncheck the enable file sharing.
But if that doesn't work, follow the whole process from the top.. factory reset etc.
Do a full factory reset of the TC..
Do it this way.
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset keep holding it for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
In the MBP make sure your wireless is set to ipv6 for link-local. This is important.
Now open the airport utility again.
The TC will list as unconfigured wifi device, and you can run through the configuration or you can manually do it..
Just select configure other from the main menu.
Then punch in the IP address which will show up as router in the wifi in the computer.
After a reset it will be default anyway so just type in 10.0.1.1 No password
Now you will get the manual setup screen and you can do the setup over again and change the disk name.
For Mavericks I recommend you use all short names with no spaces and pure alphanumeric.
To change the name of the disk uncheck the file sharing.. otherwise the name cannot be changed.
Once you change the name you can re-enable the file sharing.

Similar Messages

How can I change the date format in Reminders and in Notes?

How can I change the date format in both Notes and Reminders? Preference on Imac and Settings in IOS do not allow me to change the format in those 2 apps.
I Like to see 10oct rather than 10/10, as an example.

pierre
I do not have Mavericks or iOS - but the first thing I would do is reset the defaults - I'll use Mavericks as an example
From If the wrong date or time is displayed in some apps on your Mac - Apple Support
OS X Yosemite and Mavericks
    Open System Preferences.
    From the View menu, choose Language & Region.
    Click the Advanced button.
    Click the Dates tab.
    Click the Restore Defaults button.
    Click the Times tab.
    Click the Restore Defaults button.
    Click OK.
    Quit the app where you were seeing incorrect dates or times displayed.
    Open the app again, and verify that the dates and times are now displayed correctly.
Then customize to taste - OS X Mavericks: Customize formats to display dates, times, and more
OS X Mavericks: Customize formats to display dates, times, and more
Change the language and formats used to display dates, times, numbers, and currencies in Finder windows, Mail, and other apps. For example, if the region for your Mac is set to United States, but the format language is set to French, then dates in Finder windows and email messages appear in French.
    Choose Apple menu > System Preferences, then click Language & Region.
    Choose a geographic region from the Region pop-up menu, to use the region’s date, time, number, and currency formats.
    To customize the formats or change the language used to display them, click Advanced, then set options.
    In the General pane, you can choose the language to use for showing dates, times, and numbers, and set formats for numbers, currency, and measurements.
    In the Dates and Times panes, you can type in the Short, Medium, Long, and Full fields, and rearrange or delete elements. You can also drag new elements, such as Quarter or Milliseconds, into the fields.
    When you’re done customizing formats, click OK.
    The region name in Language & Region preferences now includes “Custom” to indicate you customized formats.
To undo all of your changes for a region, choose the region again from the Region pop-up menu. To undo your changes only to advanced options, click Advanced, click the pane where you want to undo your changes, then click Restore Defaults.
To change how time is shown in the menu bar, select the “Time format” checkbox in Language & Region preferences, or select the option in Date & Time preferences.
Here's the result AppleScript i use to grab the " 'Short Date' ' + ' 'Short Time' " to paste into download filenames - works good until I try to post it here - the colon " : " is a no-no but is fine in the Finder
Looks like iOS Settings are a bit less robust
- Date/Time formats are displayed according to 'tradition' of your region > http://help.apple.com/ipad/8/#/iPad245ed123
buenos tardes
ÇÇÇ

How can I change the format of some of the pages of a PDF-document?

I use Adobe Acrobat and have a PDF-document with A4 pages and some pages of another format (half of an A4).
How can I change the format of these pages to A4 (with a lower blanc part)?

You can increase the page size with the Crop Tool of Acrobat Pro.

HT4007 I Just updated Apeture to 3.3.2 Now there are some photos that I receive a message..."Unsupported Image Format" Are there lost? can I retrieve them? can I change the format? Help...?!?

I just updates Apeture to version 3.3.2 after installing Mountain Lion. There are some photos in Apeture that now say, "Umsupported Image Format". Are these lost? Can I retrieve them...how? Can I change the format so that I can see them again? Help?!?

Are these images "Raw" images? What is the make of your camera?
Check the version of the Digital Camera RAW Compatibility Update that is installed. The version of the raw support is shown in the About panel: from the main menu bar:
Aperture > About Aperture
Download the latest Raw Update from here:
Digital Camera RAW Compatibility Update 3.14
If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie

How can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?

I am in openscript, using a settext commend - .setText("{{@today(MM/dd/yyyy), 10-02-2011}}}}"); is anyone know how can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?
I went to Java Code tab and tried to use - new SimpleDataFormat("dd-MM-yyyy").format(new Date()); but not successful. Any help will be appreciated.
Katherine

Hi,
you can display the date format in dd-mm-yy by using the below Java code.
First import the bellow java classes.
import java.util.Date;
import java.text.SimpleDateFormat;
//and add bellow code in run() function
     //************ Display Date and Time *************
     Date date_format=new Date();
     SimpleDateFormat dateFormat = new SimpleDateFormat("dd-mm-yyyy");// HH:mm:ss");
     String Exec_Time = dateFormat.format(date_format);
//output statement
info("Today's Date: "+Exec_Time);
I can able to add the screenshot of this output here, so if you need any other information please write to me.
Regards,
MRSN

How can i change the date format mm/dd/yyyy to dd/mm/yyyy

How can i change the date format mm/dd/yyyy to dd/mm/yyyy

Date, time and currency formats are controlled via Settings > General > International > Region Format - you can't just change the date format

How can I change the date format?

How can I change the default date format for all date fields in Oracle CRM OD? Currently it is set to the US format of MM/DD/YYYY.
I would like to spell out the month, e.g. October 6, 2010, in order to avoid confusion between US and international date formats.
For example 11/6/2010 means October 6, 2010 in US but it means 11 June 2010 internationally. Having a global team, this is causing problems for us.
Georgi

Georgi, the company profile has a Default Locale. Also each user can have their Locale. The US format of MM/DD/YYYY can not be changed to October 6, 2010 as an example.
I would recommend that you submit a enhancement request to CRM On Demand customer care.

Can we change the date format to be dd/mm/yyyy?

Can we change the date format to be dd/mm/yyyy?

Hello leahmaree,
Yes, you can:
Click the Options tab
Click the Language & Formatting label
Set the Date Order preference
I hope that helps,
Brian

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

Is the time format of your Mac in 24 hour?

Can we change the default file format 'BIN' of system to 'ASC' using table

can we change the default file format u2018BINu2019 of system to u2018ASCu2019 using table TSOPE
if possible:will it affect any system performance

Hello Vincent,
BIN(Binary) is default selection.and so we have to select ascii.to make myself more clear my queries is like:
first for setting ascii what we need to enter in text box that is against ASCII.and
secondly if we select ASCII will it affect system performance in anyways.

ICS 2: Can I change the format of the date displayed by Calendar Server from M/D/Y to D/M/Y using JavaScript?

Can I change the order in which the month and day are displayed in Calendar
Server using JavaScript? Specifically, I would like the date to be displayed
in the format D/M/Y instead of M/D/Y.

Yes. You can change the format of the date by editing the JavaScript variable
in the file 
loadpoint/CalendarServer/cal/uicust/en/main.html
. The variable is located in the
"Misc" section in the
following line: 

i18n['def date order'] = 'M/D/Y';

Edit the line as follows: 

i18n['def date order'] = 'D/M/Y';

Hello Mark,
yes, it is possible. In Calendar Express under
"Options | Settings -> Date"
"Show brief dates in the following order: Date, Month, Year".
BTW.: iCS 5.0 P4 is out since August, 2001. It's worth upgrading!
Regards,
Jakob.

How can I change the music format of my songs?

How can I change the format of songs in my computer so itunes will recognize them?
Music is recorded in my computer but itunes doesn´t seem to read it.

You know, its kind of weird. The songs where in a friends i-pod; that I uploaded into my computer using the instructions found in one of these forums. Then I downloaded the music into my i-pod and it was ok.
After a few months it occurred to me to consolidate my library. After consolidating my library; itunes can´t read about 7GB´s of music. I haven´t connected my ipod into my computer since then because I fear the music will be lost.
The music is stored in my computer, some of it I can listen with the windows media player. I just can´t get itunes to recognize it.
If I sync my ipod will I loose the 7GB of Music?

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
 [super viewDidLoad];
 This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
 self.tableView.allowsMultipleSelectionDuringEditing = YES;
 // populate the data array with some example objects
 self.dataArray = [NSMutableArray new];
 NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
 for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
 NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
 [self.dataArray addObject:itemName];
 // make our view consistent
 [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
 return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
 // Configure a cell to show the corresponding string from the array.
 static NSString *kCellID = @"cellID";
 UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
 cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
 return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
 [self.tableView setEditing:YES animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
 // The user tapped one of the OK/Cancel buttons.
 if (buttonIndex == 0)
 // Delete what the user selected.
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL deleteSpecificRows = selectedRows.count > 0;
 if (deleteSpecificRows)
 // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
 NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
 for (NSIndexPath *selectionIndex in selectedRows)
 [indicesOfItemsToDelete addIndex:selectionIndex.row];
 // Delete the objects from our data model.
 [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
 // Tell the tableView that we deleted the objects
 [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
 else
 // Delete everything, delete the objects from our data model.
 [self.dataArray removeAllObjects];
 // Tell the tableView that we deleted the objects.
 // Because we are deleting all the rows, just reload the current table section
 [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
 // Exit editing mode after the deletion.
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
 // Open a dialog with just an OK button.
 NSString *actionTitle;
 if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
 actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
 else
 actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
 NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
 NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
 UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
 delegate:self
 cancelButtonTitle:cancelTitle
 destructiveButtonTitle:okTitle
 otherButtonTitles:nil];
 actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
 // Show from our table view (pops up in the middle of the table).
 [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
 [self.dataArray addObject:@"New Movie"];
 // Tell the tableView about the item that was added.
 NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
 [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
 withRowAnimation:UITableViewRowAnimationAutomatic];
 // Tell the tableView we have finished adding or removing items.
 [self.tableView endUpdates];
 // Scroll the tableView so the new item is visible
 [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
 atScrollPosition:UITableViewScrollPositionBottom
 animated:YES];
 // Update the buttons if we need to.
 [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
 if (self.tableView.editing)
 // Show the option to cancel the edit.
 self.navigationItem.rightBarButtonItem = self.cancelButton;
 [self updateDeleteButtonTitle];
 // Show the delete button.
 self.navigationItem.leftBarButtonItem = self.deleteButton;
 else
 // Not in editing mode.
 self.navigationItem.leftBarButtonItem = self.addButton;
 // Show the edit button, but disable the edit button if there's nothing to edit.
 if (self.dataArray.count > 0)
 self.editButton.enabled = YES;
 else
 self.editButton.enabled = NO;
 self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
 // Update the delete button's title, based on how many items are selected
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
 BOOL noItemsAreSelected = selectedRows.count == 0;
 if (allItemsAreSelected || noItemsAreSelected)
 self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
 else
 NSString *titleFormatString =
 NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
 self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

How can I change the font and color of an email signature?

How can i change the font and color of an email signature?

Mail > Preferences > Signature
Highlight the Signature.
Click Format in the menu bar and select " Show Fonts".
Select the Font.
Highlight the Text.
Click Format in the menu bar and select " Show Colors".
Select the color.
Mail > Preferences > Composing > Message Format: Rich Text
Best.

I can't change the format or letterbox in the latest iMovie?

Similar Messages

Maybe you are looking for