I can't check "required" checkboxes in a datasource view.... the view is disabled.sad

Scott Mitchell

Hi Scott,
You can try the steps below, and check whether it helps you.
Clean and Rebuild - Cleaning and rebuilding your current Project (Right-click > Clean, Right-click Rebuild respective) and see if that makes any difference at all.
If these issues are still persisting after the above steps, try restarting Visual Studio (and even your local machine)
If it still has same issue, you could look into relevant topic about "SQL Views Not Available in DataSource for HTML Client"
Please let me know if there is anything that I can do to help.Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How can I check a checkbox status?

I am writing an invoice which involve parts and labor for an auto shop. A check box precedes each line. If the checkbox is checked, then the line is for a part, which I will use to add parts and labor separately for tax and information purposes.
Question: Using Acrobat Professional 8, what Java code would check whether a checkbox named CB1 is checked or not?.
Papaturro

Post your question in the forum for Acrobat Scripting.

HT5622 there is monthley fees going off my credit card, where can i check what excactly is it for, on the bank statment it is not spesified ?

there is monthley fees going off my credit card, where can I check what that is for, it is not spesified on the statments, and do I pay monthley fees for certain apps that I downloaded even if it is for free

To view purchase history > iTunes Store and Mac App Store: Seeing your purchase history and order numbers
No charge for free apps unless they are an in-app purchase. Meaning the app itself is free but the subscriptions are paid > iTunes Store: About In-App Purchases

A box with a blue outline appeared in my bookmark drop-down menu. I can't get rid of it, and it obstructs the view of the bookmarks as I scroll up or down. Help!

I was trying to bookmark a page, using the "Choose" menu in the bookmarks. I must have touched a key by accident, and a box with a blue outline & the name of one of my folders appeared in my bookmark drop-down menu. At first the box contained the folder name, then I was trying to delete the box, and erase the name, thinking it might get rid of the box, but it didn't. I can't get rid of this box! It obstructs the view of what is underneath. It stays in the same position as I scroll up & down in the drop-down menu, and it hides what is underneath. Please help me get rid of this box. It is driving me crazy! Thanks!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

How can i force a mail link to open in the viewer and not in the Mail App?

Hello to everybody!
I've a trouble about the mail links in a digital pubblication. I've to force a mail link to open inside the viewer.
A normal mail link causes the exit of the app and switch into the iPad Mail App... Is it possible force to open the mail link inside the folio with the DPS?
I've seen other digital pubblication made outside the DPS that can open the mail tab of the Mail App without exiting the starting App...
Thank you in advance for your help!
Max

You can't with DPS, it will always launch the mail application registered with the operating system.
Neil

How can I check if there is a table with the given name ?

I'm using 8i and 9i.
Could anybody teach me how to check if there is a table with a certain name in SQLPLUS without using SELECT
statement ?
I want to use the following logical procedure.
if exists "table_to_be_deleted" then drop table "table_to_be_deleted"
Or, is there any system table that I can check the names of tables like
count = select "table_to_be_deleted" from "an_oracle_system_table"
if ( count != 0 ) then drop table "table_to_be_deleted"
Thanks,
John

Just create it, but be aware that DDLs can't be executed directly from Pl/Sql, so you'll have to use dynamic Sql, e.g. :
SQL> create table test(a number);
Table created.
SQL> begin
2 drop table test;
3 exception
4 when others then
5 null;
6 end;
SQL> /
drop table test;
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00103: Encountered the symbol "DROP" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe
SQL> ed
Wrote file afiedt.buf
1 begin
2 execute immediate 'drop table test';
3 exception
4 when others then
5 null;
6* end;
SQL> /
PL/SQL procedure successfully completed.
SQL>Now the table does not exist anymore, but further executions will not generate errors, due to the exception handler :
SQL> desc test
ERROR:
ORA-04043: object test does not exist
SQL> /
PL/SQL procedure successfully completed.
SQL>

SCOM event ID 2115 - how can we check which which monitors or rules caused the issue

A Bind Data Source in Management Group XXX has posted items to the workflow, but has not received a response in 8220 seconds. This indicates a performance or functional problem with the workflow.
Workflow Id : Microsoft.SystemCenter.CollectDiscoveryData
Instance    : XXX
Instance Id : {FB2DDD17-A942-4D7E-1EA6-09A5351CAB07}
A Bind Data Source in Management Group XXX has posted items to the workflow, but has not received a response in 8220 seconds. This indicates a performance or functional problem with the workflow.
Workflow Id : Microsoft.SystemCenter.CollectPerformanceData
Instance    : XXX
Instance Id : {FB2DDD17-A942-4D7E-1EA6-09A5351CAB07}
A Bind Data Source in Management Group XXX has posted items to the workflow, but has not received a response in 7980 seconds. This indicates a performance or functional problem with the workflow.
Workflow Id : Microsoft.SystemCenter.CollectDiscoveryData
Instance    : XXX
Instance Id : {FB2DDD17-A942-4D7E-1EA6-09A5351CAB07}

Hi
Please refer below link for this issue
https://support2.microsoft.com/kb/2681388?wa=wsignin1.0
http://blogs.technet.com/b/kevinholman/archive/2008/04/21/event-id-2115-a-bind-data-source-in-management-group.aspx
http://blogs.technet.com/b/momteam/archive/2012/04/17/kb-how-to-troubleshoot-event-id-2115-in-operations-manager.aspx
you can find the object name for GID using powershell and sql query on operation manager :
Powershell :
(Get-MonitoringObject -id ‘GUID′).DisplayName
sql query :
Select * from BaseManagedEntity where BaseManagedEntityID = ‘GUID‘
Regards
sridhar v

Since the last update of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you check why it taking so long since the update on firefox.

since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.

I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.)

I downloaded Acrobat on free trial last night. Adobe says I can't sign in because I'm not on the internet. Disabled my firewall, checked all settings and after 2 hours last night and 1-1/2 hours today with Tech Support still unable to access. This doesn't

There's no way to lodge a complaint about customer service!

Hey jeand63612291,
We are really sorry for the inconvenience that has caused to you.
Could you please let us know what version of OS are you working on.
If possible, share the screenshot of the error message that appears on your screen.
What all workarounds have you followed till now?
For an issue where you are unable to start a trial version, please refer the KB doc link mentioned below:
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Hope to hear from you.
Regards,
Anubha

My stills are all over the place when I export them. How can I have them play as they appear on the Viewer?

Hello everyone.
When I exported my video (all stills), the images are all over the place. I had adjusted the postition (X & Y) for each one, and when I exported the video, the stills are not staying in one place, but are coming from different angles and different positions. How can I fix it so that when exported, it plays as it does on my Viewer?
Thank you!

First, I'd try deleting all render files in both the associated Events and Projects (File menu). Do not render before exporting.
"Preference Manager" is a free download from Digital Rebellion (dot com) you can delete the FCP X pref files quickly, easily, safely. Try that next.

I want to know why I can't clear my history because whenever I open the view history menu, it goes to the library/bookmark menu. Essentially I just want to delete the websites that come up when I start to type in the url box

I want to delete the websites that come up when I type in something in the URL box. I also want to be able to clear my history. I cannot do this because whenever I want to view the history it takes me to the book marks menu

The Library handles both the History and the Bookmarks.
Don't you see the History item in the left pane that shows the full tree ?
See http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

HT4235 I just bought a new Ipod Nano and cannot get it to sync with my computer. I downloaded the latest Itunes before I started but it doesn't sync. The diagnostic test says that my Ipod isn't detected. What can I check?

I cant get my Nano to sync to my computer. It is new and and I downloaded the latest Itunes last week. I hit sync and it makes a sound within a second and then says it is done. What can I check?

Hey OBandPL,
I would use the following article to run through the recommended syncing steps one more time:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/HT1351
Welcome to Apple Support Communities!
Best,
Delgadoh

My Apple ID is registered in wrong email address. How can i change it or else when the server reply me to check my email that i can't check due to they sent to wrong email address...

Please give advice of how can i change my Apple ID (email address) as it is wrong address. Like i just update my iPhone to latest version 6.0, and get the new app, iCloud which need me to key in my Apple ID and Password. I have no choice to use the wrong email address as it is already registerd since from 1st day i use my iPhone. Then i received the reply that tell me to check my email for verifing but the problem is i can't check my gmail as they sent to the email is not my actual gmail address....
How can i solve this problem?

You may change your Apple ID to any email address that is not already used as another Apple ID, or that is not already associated with another Apple ID.
In other words, if I have an Apple ID [email protected], and have alternate email addresses of [email protected] and [email protected], none of them may be used by me or anyone else for an Apple ID, Rescue Email, alternate email, or anything Apple-related.
If the Apple ID link above indicates your email is already in use then it is. Use https://iforgot.apple.com, select Forgot your Apple ID? and provide the information requested. If the email address is one you created and can still access, you may be able to retrieve it. If it is one someone else created, you will not.

How can i check rfc working in R3?

Hi,
how can i check that an RFC was executed in the RFc after Xi called r3?

Hi Mushon,
for example you can create a little test database and fill it.
Easier: take that code:
CALL FUNCTION 'SM02_ADD_MESSAGE'
EXPORTING
    MESSAGE                    = 'Module was called!'
   EXPIRATION_DATE            = SY-DATUM
   EXPIRATION_TIME            = '230000'
   DELETE_TIME                = '230000'.
If you execute any transaction in R/3 you get a little popup, that there is a message in your inbox.
Regards,
Udo

HT1600 We have an apple tv1st generation We want to use airplay. When we go to the 'update software' under settings, general, a message comes up saying - There is no update available. Apple TV can't check right now. Try again later. WiFi is worko

We have an Apple e TV 1st generation. We want to use AirPlay. When we go to Software Update, under settings, general, we get this message - There is no update available. Apple TV can't check right now. Try again later
The wiFi is connected and working
Please help?

Also the 1st gen device was discontinued awhile ago, since it runs on a different OS compared to the newer models it hasn't received any updates for 3 or 4 years now. There would be no update to check for.

I can't check "required" checkboxes in a datasource view.... the view is disabled.sad

Similar Messages

Maybe you are looking for