I can't choose songs or skip songs without battery running out?

whenever I choose a song or skip a song, it always comes up with the 'no battery remains' message. this happens especially when choosing songs. no matter how much i charge it, once the message comes up i can't get it to play music once i turn it on again. it works fine when i just listen to it straight through. i'm wondering whether i should get it replaced. i've had it for about 2 years 4 months. help please?
Ipod Mini Version 1.4.1   Windows XP  

I have tried restoring it through itunes. It didnt help at all unfortunately. I've always charged it through the power point, so I don't know what to do.

Similar Messages

  • How long can the iPhone 3GS record video before the battery runs out?

    My father invested in an iPhone 3GS Tripod adapter for his tripod, for some conferences and lectures. He has a 16GB 3GS, which will record about 8.6 hours, according to another thread I've read about on here. But he doesn't really want to bring the USB/Adapter cable with him, and have to worry about finding a power outlet. Assuming his phone is on full charge, and bluetooth/wifi are shut off, and brightness is kept a bit dim (not too dim) - can anyone give me a round about answer of how long the it will record video before the battery dies? This function is today, so timing is critical. I will have him take the charger/usb with extension cable just in case. I'd appreciate anyones input

    Not sure if the battery will die before or after your done recording on the iPhone.But most sites are claiming that you can record up to 2GB per video.I just recorded a one minute clip,and it rounded off to about 34MB.So if you devide that,it rounds off to around an hour of recording video...But take that with a grain of salt,I'm not good with math lol

  • Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

    Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that  "no service " appears a lot  especially when opening wifi or 3G , can you help ?

    Your battery is running quickly because your cellular data connection is weak.
    Is your phone carrier a supported carrier:   Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
    For your no service issues:  If you see No Service in the status bar of your iPhone or iPad - Apple Support

  • I upgraded to iso6.0.1 on 4s and now the battery runs out quickly and text sounds/music do not work. Please can someone help.

    Help - I upgraded to iso6.0.1 and now the battery runs out quickly and the text and sound does not work! can anyone help me?
    Thanks

    Use the search box at the top of this page or look in the MORE LIKE THIS box to your right.  If you can find your way to this forum, you certainly can manage a search.

  • How can i "find my iphone" if the charge has run out so the "lost phone" can't be ONLINE?

    How can I "Find my iphone" if the charge has run out so the phone that is lost can't be ONLINE?

    You can't.  Place it in lost mode and it will be implemented if and when the lost device is recharged by someone and connects to the internet.

  • What can I do when it says "your system has run out of application memory?

    What can I do when it says "your system has run out of application memory?"

    The message has nothing to do with low disk space.
    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • How can I intro play / auto-skip songs after a set amount of play time?

    I'm using iTunes on Windows 7 and I'm curious if there's a way, using iTunes itself or with a plug-in, to just intro play through my playlists. By this I mean, play only the first 30 seconds or so of each song before skipping to the next track.
    Any help greatly appreciated.

    well, that's no fun...

  • Why does my IPhone 4 tell me that it can't back up onto icloud as it has run out of storage space, but when i look at iCloud storage it tells me I have 4.7GB out of 5GB available?

    Why does my I-Phone 4 tell me that it can't back up onto i-Cloud as it has run out of storage space, but when I look at i-Cloud storage it tells me I have 4.7GB out of 5GB available?

    Welcome to the Apple Community.
    Have you checked how much space the backup will need.

  • Can't upgrade,previous owners ID? Trials also run out.

    I can't upgrade GB because previous owners ID unknown also trials run out.

    You can try to pull/erase this file:
    /Macintosh HD/Library/Application Support/adoption.plist
    Then reopen the app store, and go to the purchases tab.
    If that doesn't work, then you may have to call Applecare.

  • How can i stop iPhone from skipping songs?

    Hi all,
    I have a iPhone 4 and on some albums when i go to play the song it justs skips to the next song. But, if im quick and can drag the slider so it skips to like 3 seconds in, it will then play the song! It will also play the song if i leave the whole album running. It just wont play if i select the song... Anyone know how to fix this?

    Hi all.
    Possible fix:
    Had this annoying issue, or similar. Songs on my iphone 4 would skip untilit found a song it could play, but often left up on the screen a different song to the one playing. It appeared songs hadnt been transferred or were missing causingthe phone to skip the songs.
    I heard that if you get a 'weird' beep noise this is the 'shake to shuffle' feature which can be turned off via Settings>Music.
    If you have a similar issue to mine, I read converting to AAC (right click song in Itunes and choose 'convert to AAC) could work, and did for me, but is time consuming and duplicates the song.
    What worked for me? Turning off 'convert higher bit rate songs to 128 kbps AAC' on the Devices>Your Iphone main menu (device summary page). This reloads all songs to the iphone and appears to fix the issue. I have checked a few songs I knew had issues and they now work, and I can get through 10+ shuffle songs (thats as many as I checked) without a skip.
    Good luck. Let me know if it works.

  • Cant sync all songs and skipping songs on phone.

    Hi! I have an iPhone 5s running ios 8.1, and im running the latest version of itunes, 12.something. haha but anyway, i have about 650 songs on my computer, that all play on there,  but when i try to sync them to my phone, a few things happen.
    An "unknown error (-54)" pops up after syncing a few songs.
    only about one out of every 10 songs work on my phone, the title is there, but it skips right over it when i try to play it, and eventually he music app crashes.
    when i check manually manage music and videos, it goes over my capacity, and doesnt let me check "sync music"
    I've already converted all my songs to AAC, took all the music off and attempted to redownload it, and sync it multiple times. Any advice would help. Thanks alot!

    Hi, please try to swipe iTunes Match and Show All Music to OFF on your iPhone: tap Settings > Music > swipe Show All Music and iTunes Match to OFF respectively. The next, connect your iPhone to your computer, try to select one song to sync. If it succeed, then try to select dozens of songs to sync.

  • Ipod touch is slow to start playing songs, and skip songs

    Ever since I downloaded the last OS update, my ipod touch has been very slow when I press on a song title to start playing it. Similarly, it is slow to skip over songs. There is now a 1-2 second delay after I touch it to when it starts playing.
    Why is this happening? Has this happened to other updated ipod touches?

    Have you done a reset? How about a restore? Either one of those should take care of what you are seeing.

  • I can't choose iOS simulator as destination when I run my project in Xcode.

    Hey there,
    Several days ago, I reinstalled my Xcode 6 for some reason. Since then, I can no longer run my apps on a simulator.
    I tried following steps to solve the problems, but none of them work.
    * I deleted my Xcode and reinstalled it from the App Store.
    * I changed my project's "Deployment Info" -> "Deployment Target" to 8.1, 8.0, 7.1, 7.0, 6.1, 6.0, none of them worked.
    * I download the 7.1 simulator from Xcode -> Preference -> Download, and change the Deployment Target again, nothing happened.
    * I clear the download caches in ~/Library/Caches/Xcode, I knew it won't make any difference, but just in case, still, nothing changed.
    I launch the simulator from the Xcode -> Open Developer Tools -> iOS Simulator. The 8.1 simulator launch with a alert said "Unable to determine device."
    NEED HELP!!!! THANK YOU!!!!
    P.S.
    * I'm using a macbook pro (15 inch, mid 2012).
    * My laptop's OS version is 10.10.2.
    * My Xcode version is 6.1.1 (6A2008a).
    * My (Default) simulator version is 8.1 (550.3).
    * I never ever use bootcamp. =D
    Hey there,
    Several days ago, I reinstalled my Xcode 6 for some reason. Since then, I can no longer run my apps on a simulator.
    I tried following steps to solve the problems, but none of them work.
    * I deleted my Xcode and reinstalled it from the App Store.
    * I changed my project's "Deployment Info" -> "Deployment Target" to 8.1, 8.0, 7.1, 7.0, 6.1, 6.0, none of them worked.
    * I download the 7.1 simulator from Xcode -> Preference -> Download, and change the Deployment Target again, nothing happened.
    * I clear the download caches in ~/Library/Caches/Xcode, I knew it won't make any difference, but just in case, still, nothing changed.
    I launch the simulator from the Xcode -> Open Developer Tools -> iOS Simulator. The 8.1 simulator launch with a alert said "Unable to determine device."
    NEED HELP!!!! THANK YOU!!!!
    P.S.
    * I'm using a macbook pro (15 inch, 2012 mid).
    * My laptop's OS version is 10.10.2.
    * I never ever use bootcamp. =D

    I finally solved this problem by open the Xcode -> Windows -> Devices and add a new simulator. It is said that Xcode 6 may have such a problem which is easy to fix.

  • HT201412 How can I restart my iphone 4s if the screen 'slide to unlock' or 'slide to power off' doesn't work? Do i have to let the battery run out?

    My daughters 4s has frozen. Displays the 'slide to unlock' message but is unresponsive.
    Online help says resart device but I can't power off as the slide function does not work.
    Any ideas??
    Thanks.

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Battery running out fast om 5.0.1, also no zoom in camera, how can I fix that? Anybody?

    Since updating my phone to 5.0.1, it seems like the battery runs out FAST!  Just sitting....Also the zoom doesn't work on the camera. I tried "pinching the screen" but I think with the case on it, that doesn't work, tapping twice doesn't work either.  Don't like these changes!  Very annoying.  Phone was fine until they recommended updating....Folks, don't do it if you haven't ......not until they get the bugs out.  Any way to go back to the last operating system, without going crazy?   anybody?

    Have you tried basic troubleshooting techniques?v I have IOS 5.1 with no problems

Maybe you are looking for

  • I want to open a new iTunes account for my daughter, how do I transfer purchases from my iTunes account to hers??

    How do I transfer purchases from my iTunes account to my daughter's new iTunes account?

  • Aspect Ratio Scripting

    I am trying to author a dvd with 16:9 and 4:3 letterbox video & menus. I want the DVD to check the player to see whether the aspect ratio is set to 4:3 or 16:9. This works in all of the set top DVD players I have tried it in(presuming the player and

  • Receiver Mail adapter errors

    I am trying to configure a receiver mail adapter.. Our system is using microsoft exchange server and i specified the following, URL: Microsoft Exchange Server and I get the following exception in Adapter monitoring, Mail: error occured: com.sap.aii.a

  • HT5313 Printer for Mac 10.7.5?

    I have had my Mac OS X 10.7.5 about a year now.  I use it mostly for communication; however I am in need of a printer.  Most home-type computers have different specifications than mine.  What do I need to be concerned about when purchasing a printer?

  • Do client connections need to be sticky to Plug-in web server instance?

    Hi, I'm trying to understand requirements for load-balancing client requests to a group of web servers on which we will have the NSAPI plug-in installed under iPlanet. We will have in-memory replication configured in a cluster of weblogic 5.1 servers