I can't close my firefox not excel or the apple system
My three buttons from close, minimized & maximized do not appear... its really weird.
I was using excel & I put alt shift enter for a formula & now my whole system is blocked & I can't close any program.
The firefox appears on the screen but I can quit the application, help me please.
Hello there, you have posed to the applescript discussions.
If you are using 10.4 (Tiger) can I recommend you post here:
http://discussions.apple.com/forum.jspa?forumID=758
You could try force quit (hold down command-option-enter) and choose the programs that are unresponsive.
Or you could hold down your power key for some time, and you machine will power down (yes you have lost your work)
Similar Messages
-
my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?
Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.
-
How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer
You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connect to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed. I still can not connecto to the Store.
My previous machine has Itunes Installed, and I deauthorized the machine so I unlinked to my Apple ID, if this is correct.
Anyway, Dropbox is also not connecting....so I do not know how to make it woek. please help!I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.
See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton -
Can it please be an option to delete the Apple Watch app, as I will not be forking over hundreds, let alone thousands, to buy a watch?
You can tell Apple at the link below.
http://www.apple.com/feedback/iphone.html -
My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.here is link to the apple product feedback website:
http://www.apple.com/feedback/ -
This driver does not appear in the apple search list.
Any ideas on where i can locate a driver.Try the HP site. Apple's drivers come from the printer vendors.
Don't be all that surprised if there isn't an updated driver available; HP don't support superceded models with updates for every OS update. -
I'm trying to find instructions on replacing the memory module in an older MacBook (1,1). This is the model that has the removeable battery on the back. Anybody know where I can get this info? (It's not listed in the Apple Support info)
Video of the installation here:
http://eshop.macsales.com/installvideos/macbook_13_mem_hd/
MtD -
When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying
Hi,
Acrobat PDF reader for iOS.
Thanks, -
My FontBook tells me it will not work in the present system. I have 10.6.8. How can I update my Fon Book?
Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181) -
Hello, where i can spend $0.04? I want to change the country, but i can't. I am not live in the U.S. and I don't have U.S. credit card. What can I do to have a zero balance?
lukse093 wrote:
Hello, where i can spend $0.04? I want to change the country, but i can't.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.
Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.
-
My preferences will not open from the apple menu.
My preferences will not open from the apple menu. Time machine will not open either. I've tried reinstalling Lion, to no avail. Has anyone else had this problem?
I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6 -
Data Source Z*** is not defined in the source system
Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny
Maybe you are looking for
-
I created a project in iDVD that looks great while previewing in iDVD. I tried to burn it several times and it gets to the end and gives me a multiplexing error (something about progress error). The movie I've got going in is a .mov file from First C
-
An internal error has ocurred (-1011) 88.1 PL 10
Good Morning After we upgraded several clients to 88.1 PL 10, an error have been ocurring when they create or update an Invoice or a Sales Order. "An internal error has ocurred (-1011)" Once the error ocurrs it would seem as the invoice wasn't create
-
How do I passthru the value of -Identity to output using a Get-AdPrincipalGroupMembership?
Hi, I have a list of SamAccountNames which I pass to the Get-ADPrincipalGroupMembership cmdlet to see what groups they are members of. In my output, I want to list the SamAccountName and the groups the SamAccountName is a member of together. What I
-
Carte audio : générer des paliers de fréquence
Bonjour. Je travail sous LB 8.5 Je voudrai créer un programme qui génére des paliers de fréquence d'une durée fixe ( un balaye de 1hz à 1khz en 300 points et à chaque point, on garde la même fréquence pendant 3 seconde). Pour cela j'utilise le VI fou
-
CSM-S and Servers On same 6500
Is it possible to have the servers you are trying to load balance connected directly into the same chasis as the csm-s is in? Or do I have to run policy routing or what is the best design for this? Thanks.