I can't comment on foxnews. Same problem with IE, FF and Chrome.
I can't comment on foxnews. Same problem with all three browsers IE, FF and Chrome. The login does not appear on the right hand corner and the comment link does not appear on any article. I already checked to ensure cookies and 3rd party cookies were enabled. I've gone to DISQUS, but it won't let me login there either...doesn't recognize my ID or email addy. Suggestions?.
It appears they've shut down all commenting due to the troll antics on the site. The pornographic images they were posting and the racial attacks (among other things) when posing as conservatives may well have caused this. The Disqus filter wasn't effective in that it is easy to get around. Too bad as it was a great place to vent.
Similar Messages
-
No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.
Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins! -
Intermittent problem with cross dissolve and chroma key
It seems that in 1 out of 10 videos I produce in Final Cut Pro there is a problem with the cross dissolve effect and chroma key. What happens is that during the cross dissolve, clip A fades out with a green tint and clip B fades in with a green tint.
Today I am working with two videos that I captured using the same work flow on the same day. One project exhibits the tint while the second project does not. If I import the problematic footage into the good project the tint problem follows the footage. In the good footage, the cross dissolve produces a result that does not have a green tint. If I re-capture the "bad" footage the results are the same.
Has anyone else experienced this and does anyone have an idea how to resolve this problem?
Thank you.
Dual G5 Mac OS X (10.4.6)In my project, both clips are source clips with Chroma, Color Smoothing and Matte Choker applied. A dissolve from non-chroma clip to chroma clip works fine. Only problem is with two chroma clips. In my dissolve, the error appears as red fringing in the area between the two masks.< </div>
You're using creative shorthand that doesn't help. "Chroma clip" means the clip to which you have applied all of these effects? What masks? Where are you getting the masks?
To understand what's going on with all them itty bitty pixels in a stack of interactive effects, do me a favor: render out a short piece, say 10 seconds of each of your chromaclips as separate movies over transparency using the Animation codec. Reimport them and put them over a solid colored Dissolve between them using different types of dissolves. Post back and tell us (me) what's going on.
I still consider this to be a bug -- nesting adds more steps to the workflow than if this bug did not exist. < </div>
It's not a bug. Your pixels are running down a pathway. It's a question of building the correct pathway and having the correct pixel wranglers with the right kinds of cattle prods.
bogiesan -
Problem with Muse Lightbox and Chrome
Hi, I've just updated my website to a brand spanking new look, and I've had feedback of a problem with this page:
SHARPE GRAPHIC DESIGN – PORTFOLIO
Works fine on Safari and Firefox, but on Chrome the Hero image appears cropped to the top part of the image, until you scroll, then you can get it all.
Is this just another Chrome scrolling issue? Any help gratefully received.
AndySimple answer is.. It depends.. What version of IE are you referring to?
IE 6 - Run the hell away if ANY of your clients are still using this dinosaur
IE 7 - Drop this bad habit...
IE 8 - Still will find some issues, but not as bad as prior versions..
IE 9 - Seems to be better, but still NOT as compatible as FF or Chrome
Thank you,
Tony Miller
Webster, TX -
I use images of paintings for presentations. Over the last 3 months or so I've noticed that I cannt copy images (either JPEg or TIFF) without a reduction in sharpness and definition. Hope someone can help with this problem.
Figured it out myself! yay! (only took my entire moring)
The solution:
Dont print to PDF!
SAVE AS COPY, then select Adobe PDF and click SAVE, this will bring up a dialog box with the options you need (including the "High Quality Print" Adobe PDF Preset)
This was not clear in any of the instructions i read -
UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)
Hi folks,
I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
The error is:
"Sesson Attempted to Access Restricted Application"
User with source IP address x.x.x.x tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
Has anyone got any suggestions on how to fix this ?
Many thanks
SteveRuud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
(yet).
There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
Steve -
Ipad air using iOS 8.1.1 refuses to mirror or use airplay. Same problem with iPhone 5c.
I use an iPad Air to deliver keynote presentations via Airplay using Apple TV. Did this a few months ago no problems. Tried yesterday to deliver a presentation iPad refuses to mirror/airplay. Both are on same wifi - signal is good. Select tick box for airplay (mirroring tab is selected) but nothing happens! After barely a few seconds tick box jumps and selection is removed. Tried hundreds of times same result. Have tried powering down and re-staring all the equipment no joy. Restarted router no joy. Interesting to note have same problem with iPhone 5C (and 4S which is still on IOS 7). Any help gratefully received. Thank you.
By accident solved my own problem. Apple TV and iPad were working on the same wifi network, close to the router, with a strong signal. That signal is boosted to the far corners of the house via a network based on the Airport Extreme & Express units. Perversely Airplay & mirroring only works when picking up that weaker wifi signal via a different channel! Now to see if a similar solution works for the iPhones.
-
Problems with dropped calls and no reception on Samsung Continuum
My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
Photosho cs4 - problem with filter liquify and gallery
Hello averydoby, when i try to open the filters liquify and the gallery filters happens that before you open takes 10 minutes to load and when you open the program takes any action carried out for 2-3 minutes. The problem essentially is that charge too.
I own a compute macbook pro with 512 mb video card and 2 gb of ram, I have also tried to use the filters with images of a few kb but the same thing happens.
Someone knows what could be the problem?
Thanks to allI asked because I had the same problem with PS CS2 and mac OS 10.2.8 on a 2 x 1Ghz mac.
(adbobe level 3 Support was able to reproduce the error but there was no solution)
I don't have the this Problem neither with PS CS4 nor PS CS2 on a mac pro (early 2008) running mac os 10.5.6 anymore.
I was just curious if I 'd have an idea to solve this problem. -
the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!
You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news. -
I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.
I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.
-
I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!
Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan -
The query i have is that ,, i have an iphone which i purchased from dubai . facetime was blocked on it when i purchased it . however now i use the phone in india and i want to use facetime on it .
i wanted to know if there is any way i can activate facetime on it .
i am having the same problem with the 4s i purchased from riyadh .You can't. FaceTime has been permanently removed from your phone, there is no way to add it back. Next time, buy your phone in India.
BTW: Your warranty & support will only be valid in the UAE. -
Can't get CF11 to download free trial for students. Anyone having the same problem with Adobe's site?
Hi,
Please download it from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.
Let me know in case you face any issue while downloading it, if you get any error try another browser.
Thanks,
Priyank -
Had same problem with 10.7. I've followed all the suggestions I can find, restored my computer many times, cleaned the registry... this is the worst software install I've ever seen!
I kept getting the reminder to update itunes 11.1.4 on my Windows 7 laptop. I now forget the error message other than it would stop and say something that itunes has stopped working and to do a manual d/l from itunes. That did not work either.
The suggestion to remove the Apple Software Updater from my programs solved this problem.
Maybe you are looking for
-
ITunes 9.0.1 wants me to install IPhone Utility?
Hi since I installed ITunes 9.0.1, everyday the Apple software update runs and wants me to install an IPhone Utility. I don't have an IPhone and don't want that software on my computer. I click quit each day, is there a way to tell the Apple Software
-
Hi all expert, currently i have a Debit, Credit and Balance in Customer Statement. How to create an ageging base on these amount? Have anyone tried before? Could you please brief me. Thanks Regards, Danny
-
How to assign an output type to a document via ABAP
Hello Guru's I have an interface with a 3rd party system to send information from deliveries. When a delivery is created, we trigger output with 'Post goods issue' and output triggers the interface. We need to also trigger output with 'reverse goods
-
Hi all, I tried to clear the sales tax gl account payble throu vendor in t.code fb60.. but the system asking for tax code again.. (My process is to pay the sales tax to the govt authorities throu vendor) where we change this? i tried in obc4 to check
-
hai i want to transmit an image in the local host..how can do it...plz help me..its urgent..