I can't configure elan touchpad after service

Hi!
My laptop is G580, i7. OS: Windows 8.1.
After service (touchpad change), I can't configure the new one. I tried with different drivers - installing and uninstalling - nothing has change. "Options" in "ELAN" tab doesn't work.... When I start programs in Elantech folder, I change the settings, but it doesn't affect touchpad. Please, help!
Link to image 1
Link to image 2
Link to image 3
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

1) Uninstall the ELAN Touchpad driver from the Control Panel
2) Reboot your system
3) Install this driver
http://support.lenovo.com/de/de/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g500s-n...
4) Test the options

Similar Messages

Can't configure EPM modules after ODI 11.1.1.6 install

So recently ran the EPM 11.1.2.1 install on my windows server r2 x86. I have configured foundation. Then i proceeded to install ODI 11.1.1.6. ODI installed successfully and runs. Although now I can't configure essbase with shared services. Anyone know how to fix this. I followed some guides and I can't figure out whats going wrong.
DjSmeadly

[2012-03-17T13:49:21.256-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.257-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.335-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.335-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.407-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.470-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.627-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.682-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.832-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.832-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.855-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.855-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.917-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.917-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.938-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.940-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
this is what i found in the configtool.log

Can't configure personal cloud after firmware uppdate

I recently bought in ix2-device. I uppdated the firmware to version 4.1.108.32627 with the result that I now can't configure a personal cloud.
When I try, the browser opens the domain https://portal.iomegacloud.com with an error message saying the page can't be displayed.
Something must have gone wrong at the uppdating for the firmware. But what? And how do I fix this?

Hello all,
If you are experiencing problems setting up or using personal cloud, please double check that port forwarding is in place and shown as open if using a port checking utility. (80, 443 for remote web browser access, 50500-50599 for LSM/basic cloud functions) How do I set up my router for Personal Cloud?
At that point please contact LenovoEMC support to create a support incident and troubleshoot for your specific circumstance.
Lenovo Contact Information is region specific. Please click the correct link then access the Contact Us at
the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Can we configure EAS and Shared services wih out a Database

Hi All,
Can any one please let me know if we can configure Essbase administration servies ans Shared services with out giving Database details while configuring.
If Database schema is not yet ready to use, is it possible to configure EAS and login to Essbase to create an outline with dimension building and Dataloading.
Regards

Hi,
I doubt it as when you start up the web applications they try and communicate with the databases, if they fail then the web app won't start up fully.
Cheers
John
http://john-goodwin.blogspot.com/

How can I configure Snow ABS after updating firmware to 5.7?

I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
LittleJohn
G5 Mac OS X (10.4.6) iMac vers A, Wallstreet PB (both 10,3,9)

There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released. Or were you simply trying to be funny?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Can't configure Airport Express after firmware upgrade 6.2.

I have an Airport Extreme (V5.6) and I recently upgraded my Aiport Express to firmware 6.2. I was using the Express to extend my range and attach to my stereo for iTunes. I went out of town and took the Airport Express with me to use in my hotel rooms. Everything was fine. When I returned and I re-attached the Airport Express to the system at home, it said there was a firmware upgrade, so I went ahead and did the upgrade. Since that time, iTunes has not been able to recognize the Express. It tries, but cannot find it. I then tried to reconfigure the Aiport Express but i get an error message "An error occurred while attempting to communicate with the AirPort Express. (-8)". Does anybody have a solution. I'm afraid to update the Base Station firmware for fear that I might run into the same problem. I'm running an aluminum Powerbook G4(1.25 ghz).

Hi,
I don't really know the solution, but the Airport Express firmware is now at 6.3. Maybe you should use this latest one to see what's happen...

I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

Yes, you can install 16GB in your new macbook pro.
Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
Good luck.

After disabling failover can't configure interfaces

I had a pair of ASA 5510s in failover and needed to move one so I disabled failover. Now I can't configure any of the interfaces. When I put an IP on an interface and then show interface ip brief, it shows as unassigned.
What else do I have to do after disabling failover to be able to configure the interfaces again?

Hi,
Are you not able to assign ip address on both the devices? If i am not wrong, you should be able to assign the ip address to the active one but not to the stand by one. There are two ways to assign ip address to the standby device. One is to reload the stand by so that it comes out of the stand by state.
Second way is to configure the standby ip address on the interface. For ex on the interface configure:
ip address 172.16.1.1 255.255.0.0 standby 172.16.1.2
The stand by device will take the standby ip address.
Rahul

Can't configure airport express with laptop after 10.5.6 update

I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11format

I downloaded the airport utility and re-installed
and the problem was solved

After getting iOS 6.1.2 wifi inactive. How fast can solve this issue in UK service center?

For Iphone 4S - After updating to iOS 6.1.2 wifi became inactive(grayved - i can't turn it on).
Phone still on warranty. I've tried everything - recover, setings resets etc.
How fast can solve this issue in UK service center?
I will be in London for 2 days, and i've bought my iphone there.
Will they be able to change my phone in these 2 days?
Thanks.

no one can say for sure, it depends on how busy they are, you should try to make an appt. in the meantime, have you tried the help from the following apple documents:
http://www.apple.com/support/iphone/wifi/
http://support.apple.com/kb/ts1398

After downloading Adobe Reader, Can't Configure Reader

After downloading Adober Reader, during install, it puts up an error saying that it can't configure itself.

Try using the installer from http://get.adobe.com/reader/enterprise/
If you are still getting errors, please tell us what OS you use.

I cannot configure my phone after just updating to ios 5, it says 'your iphone could not be activated because the activation server cannot be reached' i also cannot connect to itunes on my computer,it says 'your sim card is not supported' what can i do?

I cannot configure my phone after just updating to ios 5, it says 'your iphone could not be activated because the activation server cannot be reached' i also cannot connect to itunes on my computer,it says 'your sim card is not supported' what can i do?

natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here.

I can't configure my Airport Express after updating to iOS7

Since updating to iOS7 and after changing the name and password on my Airport Extreme I can't configure my Airport Express via my iPad (neither in the Airport App, nor under Wi-Fi in the control panel App). Please advise!

Try the "protected setup" method of configuring that adapter. According to the electronic book "Take Control of Your 802.11n AirPort Network", that involves selecting the AirPort Utility menu option Base Station > Add Wireless Clients. TiVo may have more information on how to do that.

After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

I can't configure elan touchpad after service

Similar Messages

Maybe you are looking for