I can't configure the resolution on my 34460A DMM with IVI

I'm trying to acquire data from my 34460A using IVI. When I use Configure Measurement, the DMM doesn't seem to be taking the resolution properly. It seems to be setting full range (slow) measurements no matter what I set there. I set the range to 3A and the resolution to 0.0001 but I'm getting measurements in the 4±2µA range
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=21588
FYI, the non IVI (LabVIEW) driver works fine.

Hello Oligarlicky,
So devices that are IVI compliant are usually advertised as such. Unfortunately, I was unable to find any information or verbiage from the manufacturer's website that indicated the 34460A is in fact IVI compliant. Here's the link for the product page: http://www.keysight.com/en/pd-2269458-pn-34460A/digital-multimeter-6-digit-basic-truevolt-dmm?cc=US&...
Additionally, it seems on the link you provided for the drivers, under the IVI drivers, it lists the models that have been tested with the IVI drivers. It turns out that the model in question, 34460A, has its tested status listed as "Blank". See attached photo:
From what I've gathered, it seems that the 34460A is most likely not compatible with IVI drivers. At least the LabVIEW Plug and Play drivers work. Was there any reason you wanted to use the IVI drivers over the LabVIEW Plug and Play drivers?
Regards,
Jae

Similar Messages

Can i choose the resolution of my external display for when the lid is closed when my lid is open

When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

Hi there, I had a similar problem and was unable to resolve it. I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck. It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa

How can i set the resolution on my imac ''27 in to 1024*768?

hello,
i'm new to imac
how can i set the resolution on my imac ''27 in to 1024*768?
its only gives me to options
1- 1280*720
2-800*600
thanks

My mid-2011 27" iMac, ML 8.3 has 1024x768:

How can I get the resolution of an image file in JSP?

how can I get the resolution of an image file like jpg,gif,png in JSP ?

Hii,
If by the resolution, u mean size..this is how u can come to know....
String add = "path/to/some.jpeg";
javax.swing.ImageIcon chain = new javax.swing.ImageIcon(add);
int height = chain.getIconHeight();
int width = chain.getIconWidth();
Hope that helps.
regards

Can I increase the resolution in a jpg created from an imovie clip?

Can I increase the resolution in a jpg created from an imovie clip? I've done the steps to create/extract a "still" from an iMovie clip (which started as a small clip in iphoto). I did the steps of creating the freeze frame, and then doing a "screen shot", but the resolution is only 97 kb, so it won't be good to print. Help!

Klaus1 wrote:
… Of course you can, and it will look great from about 2km away.

Can we configure the no of days an instance stay in engine db/workspace

Oracle BPM 10.3 MP2 WL Version
Can we configure the no of days , instance needs to stay in engine db after going to end.
In process admin, under alengine - services tab - we have Disposer Latency and Instance Expiration properties.
If Disposer Latency is set to 1 day, Instance Expiration is set to 15 days, does it mean that instance would stay in engine db / workspace for 15 days after reaching end of the process?
If I want the instance level data to stay in engine db / workspace for 60 - 90 days, Can I achieve it by setting Instance Expiration to 60 / 90 days?

The disposer latency specifies how often the queue of instances is looked at for disposal. If it is set to 2 days then the queue is evaluated every two days. If the instance expiration is set to 15 days then this is the minimum amount of time that an instance can sit in the End activity. Every 2 days the disposer looks at the instances that have sat in the End activity for at least 15 days. In theory, an instance can sit in the End activity for 16 days 23 hours and 59 minutes (15 days + almost 2 days).
Dan

Can we configure the dynamic IP address in receiver JDBC channel

Hello,
Can we configure the dynamic IP address in receiver JDBC communication channel at runtime.
Thanks,
Soorya.

No, that is not possible.
The simplest solution would be to define a service and communication channel for each server and then use the receiver determination to determine which service to send to.
The only other way would be to use a receiver java proxy where you would have to code in the JDBC request yourself.
Regards,
Yaghya

Where can i find the resolution of a photo? I need to change it to 102

where can i find the resolution of a photo in iphoto? How can I change it to 102? I see is the pixel width and height, along with the mb/kb size for photo info; I need to change the resolution and size for submission.

Short answer: the dpi (or resolution) is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

Where can i configure the jsp's encoding content?

i write application in chinese soft enviorment ,every time the jsp is saved,the encoding ="gb2312" was deleted ,so i have to rewrite again,it's not convenient!
how could i handle above problem?can i configure the encoding content for all pages?thanks.

Hello,
Unfortunately the EA version has several issues w/encoding. We believe we've fixed them up in our next release, but unfortunately with EA, there are a lot of limitiations.
Apologies for the trouble.
Val

How can we configure the width of the table in SAP DB

Hello sirs,
How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
With best regards,
Sudheesh....

Hi,
The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
Can we change the column width?
The answer is 'NO'.
check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
The restriction cannot be broken.
Regards,
S.Divakar

Can I use the Apple ADC to DVI adapter with a VGA monitor?

Hey everybody,
I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
a VGA to ADC converter will drive the ADC display directly
<http://www.gefen.com/kvm/product.jsp?prod_id=1301>
If you have the Apple DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
you could use it with a VGA to DVI converter
<http://www.gefen.com/kvm/product.jsp?prod_id=1310>
It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
<http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-)

How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish

You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

I can't configure the resolution on my 34460A DMM with IVI

Similar Messages

Maybe you are looking for