I can't connect my devices to wifi

Hello. I've just set up an Airport Extreme and my iPhone and iPad don't get a connection to the wifi network just created. The name of the network is displayed, the password has been typed in but no connection is established.The router mode is off (bridge mode). I tried various reset, on the Airport, the router, the devices themselves, but uselessly.

Read this:
http://support.apple.com/kb/HT4628

Similar Messages

Can't connect any devices to wifi through actiontec C200a modem

We have centurylink actiontec c2000a modem at work. this is the 4th modem in the last year and a half. Haven't been able to get the wifi to work on any of them. Any suggestions? Thanks

First, make absolutely, positively sure that the password you are using is current (not a correct but old password) and entered correctly. Note that case is significant in passwords (i.e., a is not the same as A), and look out for look-alike characters (O vs 0, 1 vs l, etc.).
If all seems OK try restarting your WiFi router by removing power to it for 30 seconds.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

After downloading the latest Itunes software, I can't connect any device to Itunes!

After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!

i am using windows 8 and still can't find my iphone on itunes

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Hi Tony,
So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
For this it will better to show at respective Menu.
In the Window title?Another good Idea !
You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
Isn't it ?
Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
Thanks for your interest and suggestion...
Ask2Learn
Edited by: Asked to Learn on Jan 23, 2013 12:36 AM

I can't connect to AppStore using wifi (iPhone - iOS6)...HELP!

That's incredible... from one week I can't connect to AppStore using WIFI anymore... just using 3G.
So I don't download apps anymore!
How can be that possible?? Anyother had the same problem??
I've already reset conncetivity setting... and it doesn't still work!
Please HELP!
thanks a lot

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

Can not connect to my home wifi suddenly

Suddenly I can not connect to my home wifi connection. I have verified the password and I know that is correct. Any suggestions?

Also, I can connect just fine from my iPad just not my iPhone4s.

Can I connect to both TC wifi and home wifi at same time?

I don't see this listed anywhere and I assume the answer is "no." But here goes...
I would like me TC to be on a separate wifi for all my apple devices in the home for backups only. I have about 5 devices including 2 ipads and 1 iphone. Then allow those same devices to connect to the home wifi for surfing. Basically, I want Time Machine to access one network/password and my browsers another network/password. Of course, I want this to happen automatically and not by selecting the TC network each time I want to backup and then switching to the other when surfing.
I know I could connect to my router via hardwire, but was hoping I didn't have to do that.
Thanks

Thanks... I assume I could switch back and forth between networks if I really wanted them to be on separate networks?
If you cannot run ethernet.. see if homeplug (ethernet over power) adapters might work for you.. when they work they can work very well.
You can also add a wireless bridge between the main modem and the TC.. but for this to work it must be another apple router. eg express or a cheap second hand extreme can work nicely.
Let me say you will very quickly get tired of switching.. whatever you are on,, you will want the other.. start the network design right.
Indeed, both Bob and I will tell you, if at all possible run ethernet.. do it properly in the wall.. get a data cabler in if you are not up to the job.. yes it is expensive.. and once it is done.. it will work properly forever more.. no other solution works as fast.. is reliable and is hassle free.

Connecting new devices to wifi

Hi…
I have a time capsule which is used as my wifi hotspot. I have multiple devices connected. I am 100% sure that I have, and remember, the wifi password (verified though keychain access, yet connecting new devices is impossible. This phenomena is just recent. The devices already connected are unaffected. I have gone through some of the obvious steps such as reeseting the Time Capsule. The discussion post "How to reset Wi Fi password when old one forgotten?" at https://discussions.apple.com/message/23252830#23252830 is problematic in that step 5 requires "continue" to be pressed; I see no "Continue" select button. Any ideas?

The instructions that you have assume that you are using a Mac running Leopard or Snow Leopard, so if you have Lion, Mountain Lion or Mavericks, those instructions would not coincide.
It would probably be simpler if you reset the Time Capsule by holding in the reset button for 10 seconds, then releasing and waiting a minute for the Time Capsule to restart.
Then, set up the Time Capsule again like you did originally. You can use the same device name that you used before if you wish, but change the name of the wireless network and the password. Might be a good idea to write down the password(s).

Can't connect to free pubic wifi.

For some reason my imac won't connect to free public wifi.
I have no problem jumping on other open signals and use an airport extreme at home without problem.
I have it set to configure IPv4 using DHCP and have the standard extra server numbers. I've turned off IPv6.
Is there something wrong with my network settings that is preventing me from getting on the public wifi?

I'm referring to one of the many free public wifi areas in NYC. For instance, I can be in Bryant Park in midtown and my partner can get on the internet but not me!
This is what Bryant Park tells me about using their wifi:
To use the Wireless Network, you will need a laptop or handheld device with an 802.11b/g compatible wireless card or built in 802.11b/g wireless capability.
Configure your software
1. Configure your Wireless card to the following:
Network name/SSID – bryantpark.org
Mode – Infrastructure
Authentication – Open
Encryption/WEP – Disabled
2. Configure your Network settings to:
All TCP/IP options – DHCP or Auto
3. Configure your Web Browser so it is NOT set to use a proxy server
Connect to the network
1. Launch your web browser. The Bryant Park Wireless Network portal will appear.
2. Read the Terms of Service, then click “I Agree” if you choose to proceed.
3. Your Internet home page or the page you requested will load.
4. Start surfing!

Can't connect wireless device to airport extreme

I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to network (kindle, cell phone, etc.) All wireless devices show excellent network signal strength, allow me to put the password in, but all show connected and have not internet access.

This appears to be a simple modem, so assuming that you reset the modem completely before you connected it to the AirPort Extreme, the next step would be to check to insure that the AirPort is in router mode and not bridge mode.
Open up AirPort Utility, click on the AirPort Extreme, and then click Manual Setup
Click the Internet icon at the top of the window
Click the Internet Connection tab just below that
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update to save any changes, and give the AirPort a full minute to restart
Check the network again to see if devices can connect now.

Tried to update device software, now can't connect to device via USB

I tried to update my 8100 to the 4.5 software. I first updated the desktop software to 4.7, then tried to update the device, but the process failed.
Now, when I open desktop manager it shows as not connected to the device. I can go into the device mamager properties and select the balckberry, but when I return to the destop amanger it says no device.
It appears that whatever I do it does not recognise the usb device.
The display on the 8100 is only text, no graphics or phone company info, and it is basically inoperable.
There are options on the display for some applications, but if I choose them, it says app not found.
Is there a way to force an update to it? Or have I poohed this phone?
Thanks in advance
edit:
I have pulled the battery on the unit to reboot it, and have tried going back to an older revision of desktop manager
Message Edited by gw22 on 12-05-2008 04:22 PM
Solved!
Go to Solution.

1. Unplug the BB from the USB and PC. Reboot the PC completely from off.
2. For the BB, you might not have loaded back the Theme that was in use on the device when you upgraded, which will normally give you a black/white screen. You need to follow the instructions below.
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't connect to apple via wifi - any suggestions?

I can't connect to App Store or even apple.com either on iPad Air or iPhone 5S (both iOS 7) using wifi. I can get onto any other website so I know my connection is fine. I can get on using iPhone cellular connection. Tried restarting, changing time zones, turning on cookies...all suggestions from the community posts but no dice. Help?!

Try resetting all settings.
General > Settings > Reset > Reset All Settings. This will reset wifi/wallpapers/ringtones/etc. alarms yada yada. But it won't delete any data such as texts/pics/game stats.

Guestnetwork is visible but I can not connect any device

Hi there,
I us an Airport Time Capsuale, Version 7.7.1.
I created a Guestnet, all fine so far.
Now I try to connect with my Iphone or Ipad to test it and I can not connect.
I can see the Guestnet, I type in the password and the device is trying to connect. trying trying trying but not connecting.
Going back to my private Network, all fine, direct connection.
Any idea what is missing or happening to work proper?
Thanks and best regards,
Michael

The first thing to check is the setting for Router Mode on the Time Capsule.
Open AirPort Utility, click on the Time Capsule, click Edit, and click the Network tab at the top of the window.
Check the setting for Router Mode. If it is now set to "Off (Bridge Mode)" the Guest Network feature will not operate correctly in that setting.....unless....you have another Apple router on the network that is acting as the "main" router for the network.
Can you provide the make and model number of your "modem"?
It is possible that the Time Capsule needs to be in Bridge Mode to work correctly with your "modem".
If this is the case, then unfortunately it will not be possible to enable the Guest Network feature using the modem that you have.

Can't connect on a secured wifi?

Why i can't connect in our office secured wifi?the wep key or password is already given to us,but everytime ill try to connect it always say 'no gateway reply'.is there any settings that i need to configure? Btw: i can able to connect thru unsecured wifi with no problem.
NOKIA E52-1
034.001
RM-469

I think your key is oke but turn off the power saving in the advanced settings of WLAN.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I can't connect my devices to wifi

Similar Messages

Maybe you are looking for