I can't connect my iPod nano 6th gen to iTunes 11.1.
I can't connect my iPod nano 6th gen to iTunes 11.1. It keeps saying 'it could not be identified properly". I've tried all the steps on troubleshooting page but nothing's successful. Anybody got some help?
I found I had the same problem so I uninstalled iTunes, Apple Mobile Device Support, and Apple Application Support and then redownloaded the latest version of iTunes which reinstalled everything I uninstalled and I was able to sync my 1st Gen iPad and my 3rd Generation Nano with iTunes 11.1
Similar Messages
-
How can i connect my ipod nano 7th gen to my car?
Hi, how can I connect my ipod nano 7th gen to my car with bluetooth? Since I only have onstar device on my car but no bluetooth device, do I need to buy extra device to connect my ipod ? And what kind of device I shall choose? Thank you!
Check with the manufacturer of your radio and see if they have a compatible cable.
-
HT1335 NOTHING happens when I connect my ipod nano 6th gen and PC!!
I just got an ipod nano 6th gen, and when i plug it into my PC my computer makes the sounds it always makes when you plug something in, but my computer/itunes doesn't reconized my ipod!!! Help??
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
Can you still purchase iPod nano 6th gen ?
can the ipod nano 6th generation still be purchased ??
Thanksthanks,
but i am in australia and amazon dont ship here.
Looking for a website that will ship here or any retailers. -
Can I calibrate my ipod nano 6th gen without a sensor in my shoe?
Can I calibrate my 6th gen ipod nano without a shoe sensor?
Yes. U do not need a sensor for an iPod nano
-
It has been doing this for a week and the music is faint while the static is louder than it. I try plugging it in to my iTunes and when I un-plug it, it still makes the loud static noise. I have also tried tapping my knuckle on the back of my ipod nano. This has not damaged it at all nor caused this to my ipod. There is no water damage to the ipod. Only a few scratches from a couple drops. The drops have been on concrete but not at a very high distance. How to I stop this? Do I need to replace my ipod instead?
Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones? You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack. Lastly, check the headphone jack for any signs of debris or damage. You may need to have the headphone jack replaced either by Apple or a third party repair company.
I assume this static is present on any track you listen to versus only particular ones?
B-rock -
Can i swap my Ipod nano 6th gen for an ipod touch?
My iPod nano power button has jammed for the 2nd time! and i know its not my fault because i take very well care of it, but it has happened again and it is less than a year old. (Swapped it last April) and so i was wondering if this time i could get a discount on an ipod touch instead of getting the same ipod once more and just having it brake again. Help please, before i go to the Apple store so i know what to do???
Okay, so this is great news but i also was wondering if you could swap in two iPods? Because i also have an old iPod nano that is 4th Generation i think, so if i swapped in two iPods would i be able to get 20% off?
Thank you (: -
tried several times to restore my nano via itunes and still keeps on saying that it needs to be restore since its on recovey mode, what do i do next?
Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
Please help!
You can't. You need a computer of some sort to sync any of those devices to iTunes.
-
I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
ThanksI too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated. -
I connected my ipod nano 6th gen using the VW aux cable in my 2007 rabbit. The connect came through, but only through the left front speaker. Please help!
Oh, Bluetooth also daoesn't work anymore!
Thanks for this great update, that causes problems where everything worked fine before! -
Ipod nano 6th Gen with engraving?
Is there any way i can still purchase an ipod nano 6th Gen with engraving?
Only if you find one in a store somewhere and then take it to an engraving firm.
-
I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help
See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities -
when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please
Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk? It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks -
My ipod nano 6th Gen. bought 5th Jan 2011 suddenly cannot be switched on. Last use is just 3h ago and everything went perfect til then Even shows no reaction when connected to charging cable. Anyone who can help?
See the Will not turn or screen remains dark section of this Apple support document to start troubleshooting the issue.
iPod nano (6th generation): Hardware troubleshooting
B-rock
Maybe you are looking for
-
Hi, I am getting the following error in inbound B2B - Custom Document over Generic Exchange - SFTP Description: B2B adapter general error StackTrace: Error -: AIP-50031: B2B adapter general error at oracle.tip.adapter.b2b.engine.Engine.processIn
-
FCP X opens but no window appears?
Upon clicking FCP X, the icon jumps up and down, but then stops, but then no windows appear? Not even the little start up one. Any help?
-
Playing music, then switch to video and then going back to play list.
When I got my new touch I could be playing music, then switch to video, play videos, then go back to music and would be right where I left off on the song I was listening to it. Now when I switch to video and go back to music I have restart my playli
-
InCopy workflow corrupting InDesign documents!?!?!
Greetings, We're a Mac shop working in a mixed 10.5, 10.4.11 environment using InDesign and InCopy CS3. Each app was recently updated to it's latest version. We have a shared folder on a file server that each user can access and each job has it's own
-
My wife just activated her IPhone5 today and when we received a call to FaceTime both her phone and IPad rang. When we answered the call on the IPad the callers image only appeared in the portrait mode and any attempt to rotate the Ipad to the landsc