I can't Connect my MacBook to my Windows PC!!!

HELP!
I've tried calling Apple AND Dell and no one can help me!
I read Switch 101 and the Great Migration. My computers are hooked up by an ethernet cable but I can't set up a network. I need to transfer my files from my PC to my MacBook.
Can anyone help me connect and set-up file sharing? Eveything is enabled and ready except for a network connection between the two, and I've tried EVERYTHING to get them to connect.
A step-by-step guide would save my life.
Thanks!

what you need to do is get a router, or use a router if you already have that, and set up a home network. its really easy with the mac, all you do is plug into the network and youre done. with the pc, connect it to the router via firewire, and then go to start -> all programs -> accessories -> communications ->network setup wizard. go through the menu, really just clicking yes a bunch of times, but be sure to turn on file and printer sharing (click on the dot to select it). at hte last step, click the option "just finish the wizard i already have a network setup disk" or somethin along those lines. depending on your windows os version, you may have to restart. thats really all you have to do. make sure you have the folder your stuff is in that you want to transfer shared, do this by right clicking on the folder, going to properties, sharing tab, and select share this folder, create a name for it etc. go to your mac, open finder, click on the network in the source pane, look for mshome (may take a minute first time if you have norton and stuff on your pc), click the name of your pc computer, should be the only one listed if its the only other comp on your network, then click connect. itll ask you for a password but you dont need to enter one, just click connect or whatever it says, which will mount that pc folder as a network disk in finder, and copy away. hope this helps.

Similar Messages

  • Airport Extreme can't connect to MacBook Pro running Windows XP

    I have a new Airport Extreme Base Station and an intel MacBook pro that is 6 months old and dual boot. The AEBS is set up with WPA2 and AEs. All works well for both MacOS (Leopard) and WindowsXP in wired mode and wireless works fine for the Mac side. When i run Windows, i can see the wireless network but i can't seem to configure it to actually connect to the network. I set it to WPA-PSK/AES, but it never can connect, and when i go back to check the settings in zeroconfig (the Windows connection manager) the connection is always reset to "WEP". Any suggestions? BTWQ, we can't connect my son's laptop (Windows XP ) either.

    Try changing the encryption, also make sure the computer is fully updated. Windows Xp computers do not all have native WPA2 capability. Try disabling security and see if that works. If it does not, it may be an interfernce problem on one computer. Try changing the wireless channel to 3 or 9

  • How can I connect a MacBook Air (new) to a Sony Bravia TV

    How can I connect a MacBook Air (new) to a Sony Bravia TV

    This Mini DisplayPort to HDMI adapter will let you see and hear your Mac on your HDTV - http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5311&seq=1&format=2

  • HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

  • Question: What makes of projectors can be connected to MacBook

    Question: What makes of projectors can be connected to MacBook, also what kind of cable do I need?

    Hi,
    Modbus is restricted to addressing 247 devices on one data link, which limits the number of field devices that may be connected to a master station.
    However, if you want to increase the number of slaves, you may use MODBUS/TCP.
    Here is a link that might help you:
    http://modbus.control.com/thread/1026247380.
    The Schneider electric 174CEV30010 Modbus to Ethernet bridge is capable of addressing Modbus slaves from 1 to 247.
    The actual number of devices which can be physically connected depends on the medium used and not on the fact it is Modbus.
    Some examples:
    RS232 is a 2 device point to point connection when using copper, however when using fiber (or other modems) it is possible to connect up to the maximum of 247 devices.
    RS485 is multi-drop and supports 32 devices on a single network. When a repeater is used, on copper wire, the number of devices can usually be increased to 64.
    Hope this helps.
    Regards,
    Rohan Sood
    Applications Engineer
    National Instruments

  • I can't connect my Macbook OS X 10.5.8 to my office Konica Minolta bizhub C353 printer

    I can't connect my Macbook OS X 10.5.8 to my office Konica Minolta bizhub C353 printer. I tried through the IP address even downloaded the drivers

    I wanna make look like  this in order for me to upgrade my os x mountain lion to os x mavericks

  • Windows laptops can't connect to Macbook Pro shared internet when WEP security is on

    As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on.  My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required.  When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password.  The same thing occurs on my Asus Netbook running Windows XP.  Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products.  I want my MacBook Pro to save me from needing an external router.

    I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
    Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
    I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
    If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
    These links may be useful:
    AirPort- Joining an encrypted WEP or WPA Wi-Fi network
    AirPort Express- Difficulty joining 3rd-party network that is using WEP

  • IPhone5 bluetooth can not connect to macbook air?

    hi
    my iPhone5 bluetooth can not connect to macbook air (mid 2012).
    is bluetooth on iPhone 5 designed so that it CANT connect to computers? 
    thanks

    Yes, BT on the iPhone only has profiles for hands-free, audio, tethering and control. It does not support file transfer profiles.

  • HT201343 can not connect my Macbook Air to apple TV3

    can not connect my Macbook Air to my Apple TV3

    If it is early 2011 or newer running OSX 10.8 Mountain Lion then  you can mirror.
    A third party app called airparrot can help other models.

  • Can I connect a Macbook to a wireless network for PCs?

    I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

    The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
    The solution is to plug directly to the router with an ethernet cable and it always works.
    The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
    So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

  • HT4783 I can`t connect my MacBook Air to my iPad Air or iPhone 5 through AirDrop

    I can`t connect my MacBook Air to my iPad Air or iPhone 5 through AirDrop.
    Connection between iPad and iPhone is OK, but  MacBook doesn`t show any of my devices in the vicinity with wiFi is connected.

    iOS devices can connect to iOS devices, and OS X devices can connect to OS X devices, but iOS devices cannot connect to OS X devices through AirDrop at this time.

  • HT1695 How can I connect my MacBook to Internet over cellular network

    How can I connect my MacBook to Internet over cellular network?

    Read here:
    http://support.apple.com/kb/ht4517

  • Macbook/mac mini can ethernet connected[crossover] with another PC-windows?

    macbook / mac mini can ethernet connected crossover with another PC - windows like Sony VAIO laptop VGN-A297XP CEZ ? If yes can share all services like pc-pc connection ? IF Ethernet speed is 100/1000 for this laptop what is connection speed mac-pc ?

    If you temporarily connect the Mac Mini server to the Time Capsule (TC) by Ethernet, can it gain Internet access now? Is the Mac Mini in the same room, different room/floor from the TC?

  • I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
    If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

  • Time capsule wireless router can not connect both Macbook and iPad

    Currently my new time capsule can only connect my macbook pro wirelessly or by ethernet. My iPad or PC can not been connected to it. I guess the setting for the router is something wrong, but I do not know how to fix it. The settings indicate that there is no DNS address, and the router is off (bridged). I tried to change the router setting, but does not succeed. Sincerely ask for help.

    The settings indicate that there is no DNS address, and the router is off (bridged). I tried to change the router setting, but does not succeed. Sincerely ask for help.
    Sorry but I need you to clarify.. router is off.. what router are you talking about??
    If the clients do not have DNS, have you tried just supplying the standard google dns ie... 8.8.8.8 (very lucky number for Chinese) or 8.8.4.4
    http://code.google.com/speed/public-dns/
    You can usually set dns manually whilst still using DHCP for IP address.
    But better to start again.. reset the TC..
    Give it a simple name .. no spaces.. all alphanumeric.. the default name is NOT windows networking valid.
    eg I name my TC.. TC1
    Wireless name.. same rules.. I use TC24 and TC5 (I use separate names for 2.4ghz and 5ghz as I do not want computers auto swapping bands) I also set channels manually.. again because I do not want them auto swapping channels.
    Wireless passwords.. same rules.. you need to make it a bit longer of course.. but pure alphanumeric no spaces.
    In the disk area, assuming you want disk access.. then put in the WORKGROUP name.. usually WORKGROUP.. in caps btw.
    If you do all that it will usually also work with iPad.

Maybe you are looking for

  • Purchse Register & sales register

    Hi, Dose anybody had developed a report for Purchase register & Sales register which includes the Excise as well as VAT values in it. I want the dump of the program as I am running very much short of time.. Kindly help. Regards

  • Operation ' Modify attribute TSTATE ' could not be carried out for Petition

    Hi Experts, when try compress a infocube appear this error Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx The petition status is green. Any idea? Enrique.

  • UPPER and lower case file extensions for Photo Shop Elements using Windows 7

    How do I persuade WIndows 7 to show both UPPER and lower case file extensions, which is a very useful facility offered by my ancient, 2002, version of Photoshop Elements? When processing large volumes (100 plus) photos it is very useful to be able to

  • Great in IE broken in Firefox HELP!

    I am not that efficient in HTML. I basically took a site that was laid out in Flash and tried to convert it over to HTML using Fireworks. All is working well in Internet Explorer but when I view it in Firefox, cells have shifted revealing black space

  • When I click on Images the language changes from English!

    I search using Google. I then click the Images icon/tab (top left). Images are displayed however the language changes from English to (what looks like) German. Most bizarre. Any clues as to why this would occur?