I Can't connect to a certain internet server

After downloading the security update, I had to retype the password to a wireless network I use at my job. Only, when i select the network, i only get the indefinite "spinning beach ball of death." But this is the only network that this happens for- i have no trouble logging on at my dorm, and have no problems at all logging on through ethernet at my dorm or my job (where the wireless problem is).
Any thoughts?

First welcome to the discussions.
From what you say I am quessing that you have a setting typed in wrong on the Network you are having trouble with.
If you are using a wireless connection and if it by chance at an office with a VPN you might checkwith the System Administrator and make sure you have the correct settings to join that Network. It has been my expieriance that they will sometimes change there settings for security reasons.
I have read of reports from other users that after checking with there Administrator they have made changes to the Network without telling all there users.
On some occasions they will re-issue or require you to create a new username and Password.
Don

Similar Messages

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

How can i connect the mac with internet key?

how can i connect the mac with internet key?
I try but it tolds me that I haven't the javaruntime...

I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

Can't connect wirelessly to the Internet

Hi all,
hope someone can help me with this.
I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
Any help greatly appreciated!
thanks
Nat

OK, here it is again
First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
Michael

HT1695 How can I connect my MacBook to Internet over cellular network

How can I connect my MacBook to Internet over cellular network?

Read here:
http://support.apple.com/kb/ht4517

Can't connect to the modem's server.

Hi guys, I have a major problem.
When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
I am using: Verizon Broadband Network
                 Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                 Westell modem model 6100
What is the problem? Has anyone experienced this problem before?
Message Edited by machg on 04-11-2009 07:10 PM
Solved!
Go to Solution.

You will not be able to log into the modem as long as the router is plugged in
You must configure the modem first to bridge mode,then plug in the router and log into it
   1.)unplug router and have only the modem in
       go to 192.168.1.1 enter
      that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                     your password is ; password
     once you lopg into that it will ask you to change the username/password
      just type in ADMIN in all 3 blanks
now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
now go to wireless settings at the top and make sure wireless is turned on
you have the option to set up a security key on basic security settings
once your modem resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router. you must restart modem and computer for everything to take effect....
also make sure and refresh your network list on your laptop
Hope this works

Can I connect my application to mssql server

Can I connect my application to mssql server ?

nioe wrote:
Something more specific, my search on Google does not appear something abuot mssql
Perhaps you could help the process along by being a little more specific. Is this an in-house application. Will it ever leave your local network? Or does it need to run over the internet? Regardless, the best option will likely be some type of REST web service that any client can use.

Safari can't connect to the web proxy server (HTTP)

Hello,
I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

There are three possibilities:
1. You entered the wrong address and port number for the proxy.
2. You entered the wrong user name and password, if applicable.
3. The proxy doesn't work or is incompatible.

Can't connect to the window application server.

I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.

Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob

How can SQLDeveloper connect to 10g DB on server but UI cannot

How can SQLDeveloper connect to 10g DB on server but the User Interface on local laptop cannot? What does the UI need that SQL Developer doesn't need?

What kind of UI are you talking about?
SQL Developer can use different type of connection method to connect to Oracle database.
For example, basic method of SQL Developer is JDBC Thin connection, in which case, SQL Developer will use JDBC driver that come with it, don't need any other thing installed.
SQL Developer also can use TNS method which will require Oracle client installed and TNS names configured.

Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
208.67.222.222
208.67.220.220
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

Hi,
Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server. Outlook kept asking for a username and a password. At the same time, entries of Event 4625 were generated on the Event
log on out Exchange server.
Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
By the way, I had used a laptop to test this problem. Its Outlook work fine ion the main office, but it won't work outside of our office.
Does anyone have any idea?
Thanks.
Johnnie :(
Johnnie

http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
For additional people reading this thread, please update to v2 of that update.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

I can't connected to the apple tv server

I can't connected to the apple tv server?????

Hello Dinaabiy,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
If you can't restart your Apple TV because it's unresponsive, try the following:
Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
Unplug the Apple TV power cord for three seconds, and then plug it back in.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can't connect you the X11 window server

Hi all!
I am having problems eom to show reports in the BEA with Crystal Reports.
I use BEA WEBLOGIC PLATAFORM 8,1 for Linux with Crystal Reports XI.
I configured server BEA to initiate as a service in my Linux SUSE, and therefore I do not use myself in the graphical way.
However when I try to visualize some report of crystal JSP page, I receive the following error:
<code>
Can't connect you the X11 window server using ':0.0 ' the value of the variable DISPLAY
</code>
With the reports me this error only occurs, therefore I have you vary webservices and paginas that function perfectly.
Already I read some topics of the forum related with this problem, but no similar to mine or that it decided my problem
Somebody could help me?
Obs:I am brasilian and my English no is good!
Sorry!

Hi Vitor,
May be this will help
1) Setting the DISPLAY variable using script or in cell by issuing,
setenv DISPLAY=<machine name>:0.0
or
export DISPLAY=<machine name>:0.0
where <machine name> is the IP or name of the machine that has a graphics server process running, like X11.
If you migrate your aplication to a different server, maybe the fonts put on the /fonts directory won't work fine...
Sample:
setenv DISPLAY=localhost:0.0 export DISPLAY
results in setting this variable for only that script process or for the cell with the local scope.
Use the xhost + command to make this variable to global scope with above.
The link has many workarounds
http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1973308&threadID=280804
Thanks
Vimala

HT4623 can i connect my ipod to internet on my pc

i dont have wireless ,can i connect it to internet using the data cable on my pc or laptop,please suggest

- You can purchase and set up a wifi router if you have a wired internet connectio to your home. the routers are cheap.
- I your have a wired or cellular connectin to your computer and your computer has a wifi card, you can set up the computer as a wifi hotspot.Google for how to set it up.

I Can't connect to a certain internet server

Similar Messages

Maybe you are looking for