I can't connect to Fon free Yi Fi with IP 4 .  What's the solution

Give me the solution to connect to Fon free YiFi with my IP4.
I've tried but in vain. Why?

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Similar Messages

  • My Display is something dirty, I can't take it away with a duster, what is the solution?

    Can someone help me with this problem,
    Is it possible to use a pair of glasses cleaning rag?

    I use iKlear products to clean ALL of my Apple products - you can get the starter kit directly from iKlear - https://www.klearscreen.com/detail.aspx?ID=99 - or via Amazon. Terrific products - I've been using them for at least 12 years now. Can usually be found in Apple Stores, too.
    Just amazing how it can make that 27" display 'shine' again!
    Clinton

  • I have Firefox as my default browser. My anti virus says the web browser is out of date and I can't update Firefox as there are no update available. What is the solution?

    I recently had a Dell Tech Specialist work on my computer. I apparently was having trouble with my current browser at the time, which was IE-7. The tech uninstalled it and downloaded Firefox. Computer works great but I cannot update the web browser as there are no updates available on Firefox. I have Norton as the antivirus program. Any suggestions on how to remedy this? I have windows XP

    You are using Firefox 3.6.3 which is an old version, the current version is 3.6.13.
    To update it either use the "Check for updates" option in the Help menu, or download and install the latest version from http://www.mozilla.com/

  • Can I use a "Click Free" backup drive with Time Machine

    Can I connect my Click Free portable hard drive backup to my  Intel IMac running Lion, and use time machine and not the Click Free backup software? I'm guessing I might have to erase the software from the ClickFree drive. This ClickFree hard drive is for Mac as well as Windows.

    telwell wrote:
    Can I connect my Click Free portable hard drive backup to my  Intel IMac running Lion, and use time machine and not the Click Free backup software? I'm guessing I might have to erase the software from the ClickFree drive. This ClickFree hard drive is for Mac as well as Windows.
    Then it is likely formatted as FAT32 and can not be used with TM until reformatted to HFS+.
    It should work after reformatting, use disk utility to erase the drive and set the format as MAC OSX Extended (journaled)

  • Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.

    Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.

    No. There's no video input.

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

    I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

    Hi _Pchay,
    Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support. 
    iOS: Wi-Fi settings grayed out or dim
    -Griff W. 

  • How can I connect to a database from ipaq with cldc??

    how can I connect to a database from ipaq with cldc??

    Hi Again
    There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
    http://developer.mimer.com/
    If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
    Hope this helps
    -Daur

  • Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable

    Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)

    Sorry but no you can't.
    Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
    Which computers can I use with my Thunderbolt display?
    Stefan

  • Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

    hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

    Marco,
    Here are some suggestions:
    1) Check the manual the Keithley manual to see how to configure the RS-232.   
        On some models you need set Factory defaults to USER and turn on the RS-232.   
        Also there may be a setting for SCPI which you want on (probably on by default).
    2) On your PC - open Device Manager. See if a COM port exists and is functional.
         You must get this working before continuing.
          You can set the COM port parameters by right clicking and selecting Properties.  
         (On some PCs the onboard ports can be disabled in the BIOS)
    3) If step two was OK, open MAX (Measurement and Automation eXplorer).      
        On the left side, click on Devices and Hardware.   
        Click on Serial and Parallel.   
        Go to the COM port you found in Device Manager.   
        Open a VISA Test Panel.
        Now I don't have one I can look at right now, so this is general idea:
       Configure the COM port to match the Keithley settings (should be OK if step 2 worked)  
       Go to the (I think) Input Output tab (you want to send a command)   
       The command string input should already have a *IDN? entered, if not, type it in.   
       Click on the Query button to send the command and check the response.  
       If you get an ID string back (Company name, Model, FW Version ...) then it works.   
       (Disregard an error saying it did not get enough charcters back.) 
    I hope this helps,
    steve
    Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
    question. Give "Kudos" to replies that help.

  • Can't connect to my home wi-fi with new Iphone 5?

    can't connect to my home wi-fi with new Iphone 5

    When you say it doesn't detect the network - is that under "Settings->Wi-Fi"? It doesn't show your network at all?
    This may sound like a stupid question but since I've learned never to leave any stone unturned - you don't have your SSID set to "hidden" do you?

  • Can't connect to ASDM 6.5.4 with Windows 8 Pro

    I am trying to install a new ASA 5505 and I can not connectto ASDM version 6.5.4 with Windows 8 Pro.
    The ASA ia giving me a correct ip and http server is enabled with the correct address allowed.
    I can ping the asa from the 8 Pro Laptop.
    I can connect with an XP PC however with no issues.
    This is the second ASA I have had this issue with in the last couple weeks since switching to a new 8 Pro laptop.
    Is there a quick solution to this issue?
    Thanks.

    Hello Craig,
    Do you have the HTTP configuration on the ASA to allow the Ip address of the 8 pro laptop?
    What Java version are you running ?
    Try with version 6 and let me know
    For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
    Any question contact me at [email protected]
    Cheers,
    Julio Carvajal Segura

  • Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

    Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

    If you're technically comfortable in getting to your Linksys settings - try changing the network mode or channel in your router's settings.
    I still use my old Linksys router and when it's set to the default channel, which is 7, my Macbook Pro and Macbook Air sometimes have issues - changed the channel to 9 and have had no issues since.
    Maybe it might work for you.
    In any event - screenshots below are for your E4200 and play with those settings and see if any of the changes you've made improves how your Macbook connects.  Before you change any settings, just remember what the old settings are in case you need to go back to your old settings.
    Good luck.

  • I can't connect to bbc website in firefox. Each time I get the same message: "the connection was reset". Can anyone help? (Already tried clearing cache and cookies).

    I can't connect to bbc website in firefox. Each time I get the same message: "the connection was reset". Can anyone help?

    I can connect http://www.bbc.co.uk/ & you may be interested in http://www.bbc.co.uk/iplayer/diagnostics
    Is your problem with streaming audio broadcasts to and are you outside the UK ?
    If so you may have fallen prey to the BBC's Content Distribution Network which often seems to produce problems they keep re-issuing advice such as:
    *''Why am I having problems listening to BBC radio outside the UK, such as experiencing poor sound quality or the station is not working?25 May 2011 20:28'' [http://iplayerhelp.external.bbc.co.uk/help/outside_the_uk/radio_problems_international/ <-- this ]

  • HT201412 my iPad is frozen.. it won't shut off.. i can't do a forced restart.. it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode- can't do recovery

    my iPad is frozen.. it won't shut off.. i can't do a forced restart by holding the sleep/wake and home button.... it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode… I also can't do recovery mode as the ipad won't shut down for me to do a recovery mode.... HELP

    Erase iPad and setup iPad from scratch
    1. Launch web browser on your computer
    2. Sign in to www.icloud.com
    3. Tap on Find My iPhone
    4. Select the iPad to be erased
    5. Tap Erase iPad
    6. Message: All your content and settings will be erased. An erase iPad cannot be located or tracked
    7. Tap Erase
    8. Enter Apple ID and Password
    9. Tap Next
    10. Enter a phone number where you can be reached. It will be shown on your iPad after it has been erased
    11. Enter phone number
    12. Tap Next
    13. Tap Erase iPad
    14. This message will be shown on your iPad after it's been erase "This iPad has been lost. Please call 12345678"
    15. Done
    16. Erase started
    16. OK
    17. Remove from Account (this will allow iPad to be activated and used by another person)
    Setup wiped iPad
    1. Slide to unlock
    2. Select English
    3. Select Country
    4. Choose Wi-Fi Network
    5. Enter Wi-Fi password
    6. Activate iPad
    7. Apple ID and Password
    8. Apple ID and Password
    9. Enable Location Service
    10. Select "Restore from iCloud Backup"
    11. Enter iCloud password
    12. Agree to Terms and Conditions
    13. Choose backup
    14. Select "Backup file in iCloud"
    15. Hello (Welcome)
    16. Slide to unlock
    17. Update Completed
    18. Continue
    19. Enter Apple ID and Password
    20. Updating iCloud
    21. Select "Don't Add Passcode"
    22. Welcome to iPad
    23. Get Started
    24. Restore Apps and Media. Your settings have been restored. Connect to power to save battery while apps and media are downloading
    25. Sign in to iCloud

Maybe you are looking for