I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

Similar Messages

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

    I bought a seagate goflex home 2TB network drive. It worked with time machine for a couple of weeks than now it wont. It just says ERROR 45 now and will not back up. Why?

    Welcome to Apple Support Communities.
    According to several related Time Machine Error 45 threads in these forums, Time Machine is not well suited to backups on most non-Apple network drives.
    https://discussions.apple.com/message/10744727#10744727
    https://discussions.apple.com/message/15643759#15643759
    https://discussions.apple.com/message/11929252#11929252
    https://discussions.apple.com/message/13164522#13164522
    One of the discussions provides an off-site link to these suggestions:
    http://web.me.com/pondini/Time_Machine/Troubleshooting.html

  • Can you use a hard drive to run bootcamp off it and also use it as a time capsule?

    Hello,
    i'm running out of space on my macbook air, so i was woundering if i could buy a portable hard drvie and use it for storage as well as to run bootcamp off it and use windows 8. But then will I be able to also use it as general storage?

    lauren_gibb wrote:
    and also use it as a time capsule?
    You mean Time Machine.. Yes, you can use an external drive for TM.. but you cannot use TM to backup the Windows partition. Use a windows software for that. You can use TM to a partition on the external drive for backup of the internal drive of the Air.
    The partition has to be formatted HFS+ to work.
    And it should be separate to the main partition you are using to boot to win8.. although I am not sure of all the details of that. As I have lots of windows computers around me do never dual boot a machine.

  • The songs that I select will not play .... message said " Song selected could not be used because the original fie could not be found.  The other message I get says " Itunes ws not able to locate any of he 330 missing files".  Trying to get in touch with

    As a first time user trying to get in contact with a Itunes customer sevice rep is impossible and I was hoping someone is aware of this problem..

    This message papers when iTunes can't find the songs in the location they used to be. If you moved them, or is connected the external drive they're on, move them back to their original location, or onnect the drive before starting iTunes.

  • How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

    HELP!
    So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
    I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
    Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
    Thanks!
    John

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

  • Trying to sync my ipod and am getting a message that says "this ipod cannot be used because the Apple Mobile Device Service as not been started". Does anyone know what this means?

    What does "this ipod cannot be used because the Apple Mobile Device has not been started?  I am trying to sync to itunes and the ipod is turned on????

    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I keep trying to update my iphone and i get a message saying iTunes could not restore my iPhone because the backup system failed

    'm trying to sync/update my iPhone on my windows computer in iTunes and I keep getting and error message saying iTunes could not restore the iPhone because the backup session failed.

    Disable your firewall/security software.
    This is asked and answered everyday.  Using the forum search bar on the right side of this page often will find an answer very quickly.

  • HT201401 After changing the sincard I cannot dile any number and I get a message " call failed " I don't know what is the problem

    The simcard  have been changed twice by the carrier VODAFONE but still the problem exist

    hello flabs, this is likely caused by an outdated extension. in case you have the social fixer addon installed, please update it to the latest version that is available at http://socialfixer.com/blog/category/releasenotes/.

  • Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

    Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

    Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary.  But you won't be able to backup that library as it will be on the same drive as the TM backups.
    It's not recommended.  An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
    OT

  • External Drive Time Machine and other files

    I want to use an external drive for time machine and storing other files.  Does time machine need the external drive exclusively or can one also put other files on the drive?

    A backup strategy is one of individual choice.  By having more than on HDD for your data, you are distributing the risk
    I have 5 external HDDs.  One is dedicated to Time Machine, the others have data that simply takes up too much room on the internal drive in the MBP (mostly video).  Some of the data that I have on these HDDs is redundant copies of what I have on the MBP and in Time Machine.  This is data that is important to me.  This may seem excessive but I would argue not.
    Ex: my iTunes is on the internal HHD, Time Machine and also on my secondary MBP (and the iPod).  That for me is important an I do not want to lose it.
    I have seen too many instances on this forum where individuals have lost data without adequate backups looking for answers on how to retrieve that information only to be disappointed.  Please don't let that happen to you.  Given enough time, ALL HDDs will fail!
    Ciao.

  • I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. Please reinstall iTunes.'  I have re-installed iTunes and still receive this message.  Any suggestions?

    I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result on installing other CD burning software. Please reinstall iTunes.'  I have re-installed iTunes and still receive this message.  Any suggestions?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

  • Can I connect any USB drive to download photo, songs to ipad2

    Can I connect any pen drive to ipad2 to download songs, photo?

    I'm not sure what you mean by "download". If you want to put content onto the iPad, then you can import photos though the Camera Connection Kit, as long as you correctly set up the USB flash drive. Search the web for "ipad import photos from usb drive" and you'll find instructions. You cannot load songs or other content onto an iPad from an external drive.
    If you mean that you want to save photos or other content from the iPad onto a USB drive, there's no way to do that I'm aware of.
    Regards.

  • HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

    I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
    I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
    May half and half, 1.5 tb for time machine and 1.5 tb for data.
    I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
    Any recommendation?

    As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

Maybe you are looking for

  • JRE 7 update 45

    Hi, After updating jre 7update 45 my applet is not working.The applet is signed with the trusted certificate. Also accrding to release notes I have added the attributes Permissions : all-permissions codebase : * Application-Name : Display Application

  • Error while installing itunes 7.5

    hey, ive been trying to install my iPod touch and when im downloading the newest version of itunes i get the error message below..and then it will install itunes anyway and it will tell me i need toreinstall itunes or the ipod wont work can anyone te

  • View/table V_T682 can only be displayed and maintained with restrictions

    Hi friends, When I want to displaying for V_T682 table  from  SM30 tr.code , it gives me about error "  View/table V_T682 can only be displayed and maintained with restrictions". I think ,this table's maintenance status is  marked as  display/mainten

  • Populate input array with spreadsheet values

    Is it possible to populate an input array with values from a text or spreadsheet file? If so, how is it done? Solved! Go to Solution.

  • Why this javascript can't run?

    Hi,i have a page like this,but the javascript function can't run,please help! <?xml version="1.0" encoding="UTF-8"?> <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/