I can't connect with people on my iSight!

I bought iSight today and hooked it up to my computer. Everything seems to be working perfectly well: the green light is on, the iSight logo appears next to my icon, i can preview my video chat. However, there is one major problem - I can't actually video chat with anyone! Everytime I try to connect with my friend either she or I accepts the invitation and then it fails to go through with the explination that the invitation was not accepted or that the connection failed. She has a PowerBook G4, and I have an iBook G4. We both have iChat AV 2.1 (v153). Can someone please help? I do not understand technical terms very well. Thank you very much!
iBook G4

Hi Pmutt57,
Welcome to the Apple Discussions
DO the Quicktime setting form the first link Rj gave you.
Open ports in your Mac Firewall if it is ON
http://www.ralphjohnsuk.dsl.pipex.com/page4.html
Open smae ports in your modem (or Use UPnP to acheive same)
Post details from the first link's questions if you get stuck.
4:15 PM Saturday; July 15, 2006

Similar Messages

Can not connect with people on Xbox 360

Ok here is the initial problem. If I try to join with someone on my xbox I'm unable to. I have checked the xbox.com site and opened the ports that they suggested. This opened up my NAT. I'm using a WRT54G Wireless-G Broadband Router, and have upgraded my firmware just yesterday (11/14/08), then unplugged my router, modem, and shutdown my xbox 360. I waited 30 seconds and starting with the router started plugging them back in, waiting, and continuing on to my modem, then xbox. I've done just about everything I could think of, and have been told. After all this no sucess. If anyone has an idea I would be greatful.

Go to applications and gaming tab
Now Forward the ports you have to this static ip address, which you assign to your XBOX
Usually ports used by xbox are:88 & 3074, which you can forward. Hi...dont worry about the setup wizard, you can configure router by manual method also.Follow this:Connect modem to router's internet port, and computer to a port 1.Press reset on back of router for a minuteTurn off modem & routerAfter 2 minutes turn on modem and after 2 more minutes turn on routerOpen setup page of router by typing http://192.168.1.1 in browser's address bar, and typing password as "admin" and no user nameGo to wireless tab, here change wireless network name from linksys to any other name.Go to wireless security sub-tab here change security mode to WEP, make sure encryption level is 64 bits. And here in key 1 box, enter a ten digit number, and this ten digit number will be security key of your wireless network.Now from wireless computer search for available networks and get connected to your own network using your network key.Well you have mentioned that you unplugged "USB" cable from back of tower which was coming from modem and plugged it into internet on router. But the router cannot work with with USB cable all five are ethernet ports(internet and 1,2,3,4). So i don't think the USB cable will fit into internet port on router.Before installing router you have to make sure you can get online from modem directly using ethernet cable and not using USB cable.Your internet service provider can provide help about it, to change Try to press reset button a bit harder, and while pressing the reset observe the power light, it should be blinking(which is solid while normal operation of router). Let the power blink for 1 minute.
After this reboot the router and try logging using admin as password The resetting of router is indicated by flashing of power light To get WEP key, connect your computer to one of the four ports on router using ethernet cable.Open setup page of router by typing http://192.168.1.1 in browser;s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier.Go to wireless tab, at top in black barGo to wireless security sub-tab, in blue bar at topHere note down wep key number 1. This will be your network key which you have to use on your wireless computers.

I can't connect with Turkey!

Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
Solved!
Go to Solution.

muskagap wrote:
Oh, sorry, it's Marocco not Turkey
tell your friend to connect Skype through a proxy server:
http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

I can't log in to ichat due to the fact that I can't connect with aim.

i can't log in to ichat due to the fact that I can't connect with aim. everytime i try to log in it gives an ichat connection alert saying that the connection to the host was unexpectedly lost. the weird thing is that it let me sign on the first time then all of the sudden it just clicked off, giving me that message.
Mac OS X (10.4.8)

I'm having the same problem.
I know this is an Apple forum, but is there anywhere that we can get info about AOL's servers (i.e., which regions are having trouble, etc)? I'm in France, and AOL seems to shut down at about 6:00pm every day. This is very frustrating, since the people i'm trying to talk to are in the US.
Edit: the firewall port solution doesn't work, either. It's AOL.

Itunes can not connect with the Itunes store

Every time I try to connect to the ITunes Store an error pops up : Itunes can not connect with the Itunes store. I have downloaded the updated software and have access to the internet. Anyone ever run into this problem?

If it still has problems after trying the steps above, try resetting Winsock. It looks like it worked for a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

My iPhone 3GS is stocked on apple logo while restarting my iphone.Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

My iPhone 3GS is stocked on apple logo while restarting my iphone. Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has never been hacked or jailbroken. We and a few others are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are not having the same hardware issue all of a sudden at the same time.

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

How many apple tv can I connect with one account?

how many apple tv can I connect with one account?

there are 2 recent posts that suggest issues over 5, one where someone was trying to troubleshoot for a friend or client as they couldn't keep more than 5 connected, and the other where somone had more than 5 but was using 2 separate itunes libraries to share the load - not sure if that was with the same or differing AppleIDs.
I guess there is always the possibility that things kight vary from one itunes version to the next even unintentionally to allow more.
AC

I can't connect with using connector

Hi,
I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

Hi Vijith,
I perform your suggestion and I got an error message.This error message is written below.
Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: 'ConnectionString'. .
There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
Error> occured >Mon May 07 09:18:37,334< >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
<RfcGetException
What's your comment?

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

Can I connect with Database using Session Bean

Hi,
I am new to EJB. I have small doubt.
can I connect with Database using Session Bean.
Regards,
Murali.

Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

I can not connect with pocket mac to my computer

I can not connect with pocket mac to my computer

I can not connect with pocket mac to my computer

I can't connect with people on my iSight!

Similar Messages

Maybe you are looking for