I can't connected to the apple tv server

I can't connected to the apple tv server?????

Hello Dinaabiy,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
If you can't restart your Apple TV because it's unresponsive, try the following:
Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
Unplug the Apple TV power cord for three seconds, and then plug it back in.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

ITunes can not connect to the apple software server says I am not connected to the internet and I am :(

Apple software server says I am not conneted to the internet and I am. I need to update software on my iTouch.

1.Power Cycle
   Power off the router. Unplug it from the wall. Wait a while.
   Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
   It will take a while.
Restart the computer.
Start up in Safe Mode.
   http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
     Safari > Preferences > Extensions
3. Turn off proxies, if selected.
     System Preference > Network > Advanced > Proxies Tab
     Under "Select Protocol", uncheck any box if selected.
     Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
5. A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please help

About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please advise with instructions how to update it...
why i am not allowed

Try running the combo update.
10.9.5 Combo Update

Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
208.67.222.222
208.67.220.220
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Can't connect to the modem's server.

Hi guys, I have a major problem.
When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
I am using: Verizon Broadband Network
                 Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                 Westell modem model 6100
What is the problem? Has anyone experienced this problem before?
Message Edited by machg on 04-11-2009 07:10 PM
Solved!
Go to Solution.

You will not be able to log into the modem as long as the router is plugged in
You must configure the modem first to bridge mode,then plug in the router and log into it
   1.)unplug router and have only the modem in
       go to 192.168.1.1 enter
      that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                     your password is ; password
     once you lopg into that it will ask you to change the username/password
      just type in ADMIN in all 3 blanks
now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
now go to wireless settings at the top and make sure wireless is turned on
you have the option to set up a security key on basic security settings
once your modem resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router. you must restart modem and computer for everything to take effect....
also make sure and refresh your network list on your laptop
Hope this works

Can't connect to the window application server.

I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.

Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob

Safari can't connect to the web proxy server (HTTP)

Hello,
I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

There are three possibilities:
1. You entered the wrong address and port number for the proxy.
2. You entered the wrong user name and password, if applicable.
3. The proxy doesn't work or is incompatible.

Can't connect you the X11 window server

Hi all!
I am having problems eom to show reports in the BEA with Crystal Reports.
I use BEA WEBLOGIC PLATAFORM 8,1 for Linux with Crystal Reports XI.
I configured server BEA to initiate as a service in my Linux SUSE, and therefore I do not use myself in the graphical way.
However when I try to visualize some report of crystal JSP page, I receive the following error:
<code>
Can't connect you the X11 window server using ':0.0 ' the value of the variable DISPLAY
</code>
With the reports me this error only occurs, therefore I have you vary webservices and paginas that function perfectly.
Already I read some topics of the forum related with this problem, but no similar to mine or that it decided my problem
Somebody could help me?
Obs:I am brasilian and my English no is good!
Sorry!

Hi Vitor,
May be this will help
1) Setting the DISPLAY variable using script or in cell by issuing,
setenv DISPLAY=<machine name>:0.0
or
export DISPLAY=<machine name>:0.0
where <machine name> is the IP or name of the machine that has a graphics server process running, like X11.
If you migrate your aplication to a different server, maybe the fonts put on the /fonts directory won't work fine...
Sample:
setenv DISPLAY=localhost:0.0 export DISPLAY
results in setting this variable for only that script process or for the cell with the local scope.
Use the xhost + command to make this variable to global scope with above.
The link has many workarounds
http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1973308&threadID=280804
Thanks
Vimala

Can't connect to the software update server, can't connect to the software update server

please advise, I like to update my iphone 4 and ipad 2 to 5.1 but I cant connect to the software update server. I've been trying to connect since yesterday. Is anybody have an idea why?

If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
208.67.222.222
208.67.220.220
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Can't connect to the BlackBerry World server

It says "BlackBerry World is having trouble connecting to the BlackBerry World server. Verify your network connections and try again."
I have recently updated my BlackBerry Playbook. It's.been like this for weeks now.
Any help would be appreciated.
Thanks.

The Playbook can only do updates with WiFi, or if it is a 4G it will do the updates over the mobile network.
If the Playbook does not update, try a re-start. Also check if your router is allowing WiFi access to the net.
If you did an operating system update, you may have to go the Identification and re-enter the Playbook's ID and password to allow access for updates and backups to work. The ID is in the main system menu listing.
Jerry G.

Cant update, keep getting "Can't connect to the Apple Software Update server." on Appstore

Hi,
From last 1 week I am getting this error.
I tried following:
1. Restart mac book several times - did not work
2. Tried connecting to different wifi networks - did not work
3. Deleted appstore and one more .plist files and restarted - did not work
4. Did Maverics restore using option R at startup - did not work
Please let me know what is wrong. Any pointers will be really appreciated.
Thanks
Sumeet

Is there any way I can prevent any such thing and is there a way what information might have been pushed out using this iWorm. What measures do I need to take now?
Answered in part in my last comment, and see also below.
Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Outlook 2013 client, not in domain, can't connect to the Exchange 2010 server

Good Aftermoon,
Having issues it seems getting to the right forum but here is what I have. Currently we are running an Exchange 2010 server. OWA is configured and I am not having any issues with people connecting through it. The issue I am having is that any user that tries
to connect through Outlook 2013 gets an error message about the proxy server and then a certificate error. I have run the tests through the toolbox and get the following results.
Attempting to test potential Autodiscover URL https://autodiscover.westmoreland-county.org:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 694 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 284 ms.
Testing TCP port 443 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 164 ms.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 245 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.westmoreland-county.org on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated, Issuer: CN=PositiveSSL CA 2, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
Elapsed Time: 201 ms.
Validating the certificate name.
Certificate name validation failed.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Host name autodiscover.westmoreland-county.org doesn't match any name found on the server certificate CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated.
Elapsed Time: 1 ms.
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Elapsed Time: 234 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 14 ms.
Testing TCP port 80 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 83 ms.
The Microsoft Connectivity Analyzer is checking the host autodiscover.westmoreland-county.org for an HTTP redirect to the Autodiscover service.
The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
Additional Details
The URL specified in the location HTTP header was not HTTPS. URL: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
HTTP Response Headers:
Keep-Alive: timeout=10, max=500
Connection: Keep-Alive
Content-Length: 356
Content-Type: text/html; charset=iso-8859-1
Date: Wed, 03 Dec 2014 18:10:08 GMT
Location: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
Server: Apache
Elapsed Time: 135 ms.
Our setup currently our domain is being hosted and the web master has control of domain settings.
I am fairly new to the Excchange Server world so any suggestions that you may have as to how I can resolve this would be great.
Bill

Hi Bill
Thank you for your pos.
You can use the following command to check whether you have purchased the certificate of audiscovery.westmoreload-country.org in your organization:
Get-ExchangeCertificate –server CASServerName | fl
For example: you want to return all certificates stored on the Client Access server named ClientAccess01, you will type the follow command in EMS.
Get-ExchangeCertificate -Server ClientAccess01 | fl
If you didn’t purchased the certificate of audiscovery.westmoreload-country.org, you could contact your certificate supplier.
You could refer to the following link:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
If there are any questions regarding this issue, please be free to let me know.
Best regard,
Jim

DNS: Client can't connect because .local domain isn't in DNS. How can I connect over the WAN to server.domain.local?

So my 2012 server is set up on the LAN with a .local domain name.
Remote Desktop Services are set up and remoteapp stuff works fine on the LAN.
I've set up port forwarding so I can connect to the server over the WAN too, but remoteapp stuff is a bit different. I can connect to the server by specifying the correct IP address. Giving a Web browser the address
https://serverIPAddress/RDWeb
lets me get the login screen and see the range of apps for me to run. I select one, the connectoid is downloaded correctly (in Chrome) and I click on the downloaded connectoid.
Unfortunately, rather than pursuing the sensible IP-address approach that I started with, the connectoid has been given the server's name on the LAN: server.domain.local. Clearly, the client machine tries to look this up but DNS hasn't heard of
it because it's a .local address.
I cannot be the only one to have come across this apparent oversight on Microsoft's part. Any ideas as to how this can sensibly be overcome? Obviously, I could put the IP address translation into every client's hosts file (and I've done this and shown it
works) but I've got too many clients to mess about like this. Anybody know 'the Microsoft way' to fix this?
Thank you for checking this out -- I am confident the details of the problem are completely specified in this query but, if I'm wrong, please ask.
Many thanks again,
Biffo

Hi,
I would like to suggest you to follow the checklist.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support

I can't use facetime on my ipod touch....it says can't connect to the face time server. Anyone else have this problem?

I can't get facetime to load on my ipod touch. It says unable to connect to facetime server. Anyone else have this issue? Any suggestions??

i bought my daughter an ipod touch and i can not connect facetime from my iphone 4. i get a picture on both but the one that's calling continues to ring and says connecting. is this a firewall issue?

Outlook 2013 client, not in domain, can't connect to the Exchange 2013 server.

Hello everyone,
A colleague and me are in the process of rebuilding our Hosted Exchange servers. Everything is working perfectly except for the local Outlook 2013 clients. They are not in the domain but in the same network (through VLANs) as our Exchange server, and still
they can't connect to Exchange without the use of Outlook anywhere. If we use Outlook Anywhere, it connects perfectly. If I ping the Exchange servers (1 CAS, 2 MBX servers) I get response with the right IP addresses.
We've tried to create a new profile, this goes without problems. We enter the FQDN (or IP address) of CAS server and the required usersname, and the FQDN gets resolved to the correct MBX server where the mailbox resides on. We complete the whole wizard and
then start Outlook. We then get the error that Outlook can't logon to the Exchange server.
Is this an authentication setting that is wrong or do we need to use Outlook Anywhere if the PC is not in the same domain as the Exchange server?
Thanks in advance!

Hi,
Agree with Martina, all Outlook clients use RPC over HTTP to connect to Exchange 2013. if the server version is Exchange 2013 SP1, only Outlook 2013 SP1 use MAPI over HTTP to connect to server after we enable the protocol MAPI over HTTP.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

I can't connected to the apple tv server

Similar Messages

Maybe you are looking for